Buy and sell, Business, industrial with in Canada, Ontario, Woodstock.
-
1
Brand new Automatic transfer switch (ATS) controllers, mfg by Cutler-Hammer. Qty pricing available
-
2
7" Klingspor Grinding Disks
Kronenflex A24 TZ Special
7" x 1/4"x 7/8'" (180 x 6 x 22) 80 m/s
Good for Cast and Iron
$3 each
-
3
BWS-5000-WS1
Knoweledge is power and knowing your weight is critical when dealing in scrap. Especially copper scrap! The BWS-5000-WS1 will allow you to know your weight before you go to the scrap yard! Never get ripped off again.
The Bluedog Wire Stripper - 5000 lb weigh scale.
Details: 5000 lb weight Capacity
Heavy Duty Checker Plate Design
Bright Red LED Display with Battery Backup
Easy to setup. Just plug in and gohttp://www.copper-wire-stripper.com/products/weight-scales/bws-5000-ws1
-
4
Jack Posts have a certified working capacity of 18,602lbs
All are CWB certified
Come in two standard sizes:
Jack Post 3.50'' x 7' to 7' 4'' - BHRT125350RD
Jack Post 3.50'' x 7' 2'' to 7' 6'' - BHRT12530RD
Custom lengths are available upon request.
All Post are primed grey.
80-84 - $134 for 1
84-88 - $135 for 1
88-92 - $137 for 1
92-96 - $139 for 1
96-100 - $141 for 1
Please contact for prices on large quantities.
Large quantity discounts available
519-485-2181 Bill
519-533-7632 Martin
-
5
CALL 647 363 5872
READ FULL AD AS HAS 2 SYSTEMS
SYSTEM 1
LATEST GENERATION MASTER 7.5 HP ROTARY SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE ( RARE IN 5.5 KW SYSTEMS )
32 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ
WEIGHT 360 LBS
STAND ALONE RERIERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS .
DELIVERY WITHIN CANADA AND USA AVAILABLE.
SYSTEM 2
LATEST GENERATION MASTER 10 HP ROTARY SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE
49 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ (RARE IN SINGLE PHASE) 3 PHASE AVAILABLE
WEIGHT 500 LBS
STAND ALONE REFRIGERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS
DELIVERY WITHIN CANADA AND USA AVAILABLE.
WE CAN SUPPLY SINGLE AND MULTI STAGE SCREW COMPRESSORS AND SPEACIALITY AIR SYSTEMS FOR HIGH END TECHNICAL APPLICATIONS LIKE FOOD AND HEALTH INDUSTRY.
ENGINEERS AND CONTRACTORS WELCOME TO DISCUSS AND HELP WITH SYSTEM DESIGN.
BUY FROM MANUFACTURERS DIRECT AND SAVE BIG ON COST
.
FINANCING AVAILABLE
CALL 647 363 5872
___________________
WE DESIGN AND MANUFACTURE INDUSTRIAL ROTARY SCREW COMPRESSORS AND COMPLETE AIR SYSTEMS. EVERY SYSTEM COMES WITH OUR UNBEATABLE WARRANTY AND PRICE GUARANTEE
-
6
Panini press for sale
-
7
VA4JXXX10 air driven motor by SPX Fluid Power 2.1 KW / 2.8 HP
-
8
Basler automatic voltage regulators, large qty's available
-
9
21” deep fryer
Panini press
Microwave
Smoker
60 into refrigerated prep table
Stainless steel tables
Various pieces of small wares
Nacho chip warmer
Live edge tables
Cherry wooden platters
Security camera system
Stereo receiver
Cutlery
And much more
-
10
Call or Text: 1 (647) 363-5872
Master industrial generator sets are fully integrated power generation systems that provide optimum performance, dependability, and versatility for standby and prime power applications.
1-year/1000 hours Warranty with Free parts and service guidance!
Powered by Master recommended diesel engine, CSA approved alternator and SmartGen control panel
Included Features:- Technologically advanced Remote Wifi Controller
- Next-Generation Brushless CSA Approved Alternator
- Inbuilt Oil/Coolant Heater to prevent cold starts and increase the engine's longevity.
- Silent Soundproof Weather Protection canopy/enclosure
- Electronic Speed Governor
- Base Fuel Tank
Prime power
This rating is for continuous electrical power supply (at variable load). There is no limit on the annual hours of operation, and 10% overload power can be supplied for 1 hour in 12.
Standby power
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Features:- Every generator set is subjected to a comprehensive test program which includes 50% load, 75% load, 100% load, 110% load and the checking and proving of all control and safety shut-down functions
- 12V DC start motor
- Equipped 12V high performance maintenance-free lead-acid starting batteries and connecting with cables
- Equipped with industrial silencer and flexible exhaust hose
- Designed to Comply with ISO8528/GB2820
Master certified engine technical data:
Number of Cylinders: 4 Cylinders Inline
Cycle: 4 Stroke
Aspiration: Natural
Bore x Stroke: 95 mm x 105 mm
Displacement: 2.977 L
Compression Ratio: 18:1
Engine Prime Power/Speed: 29 kW / 1800 rpm
Engine Continuous Power/Speed: 29 kW / 1800 rpm
Speed Governor: Mechanical
Cooling System: Forced water cooling cycle
Steady Speed Drop: 1%
Fuel Consumption at 100% of Generator Set Prime Output: 7.31 L/H
Starter Motor: DC12V
Alternator: DC12V
CSA Approved Alternator technical data:
Max Power: 25 kW
Frequency/Speed: 60 Hz / 1800 rpm
Exciter type: Single bearing, Brushless, Self-Excited
Power factor: 1 P.F
Voltage adjust range: 5%
Voltage regulation NL-FL: 1%
Insulation Grade: H
Protection Grade: IP23
Phase: 1
CSA Approved
SmartGen control panel technical data:
The control module gives digital readouts of:
Generator voltage
Output frequency
Engine speed
Battery voltage
Engine hours run
The control module has indicators for failure information:
Overspeed/Underspeed
Emergency stop
Low oil pressure
High water temperature
Failure to start
Battery charger failure
Automatic shutdown occurs under:
Low engine oil pressure
High engine water temperature
Overspeed/Underspeed
Failure to start after three attempts
......................................................................................................................................
For more details, call or text: 1 (647) 363-5872
___________________
WE DESIGN AND MANUFACTURE INDUSTRIAL ROTARY SCREW COMPRESSORS AND COMPLETE AIR SYSTEMS. EVERY SYSTEM COMES WITH OUR UNBEATABLE WARRANTY AND PRICE GUARANTEE
-
11
new unused, in perfect condition Bodine model V-10R 14 RPM, 115 V AC or DC, 0.38 amp. $100. Qty pricing available.
-
12
Brand New - For Sale - 519-535-2425
-Fully Adjustable Saddle with Corner Brackets to Fit Whatever Size Transmission You are Working on
- Two 23" Long Safety Chains for Securing the Transmission on the Saddle
-Telescopic Two-Stage Hydraulic Ram for Greater Lift Range
-Foot Operated Pump and Lowering Pedal Allow Mechanic to Position and Align the Transmission with Both Hands
- Wide, Stable Four-Leg Base with 4 Cast Iron Swivel Casters for Ease of MobilityFully adjustable saddle with corner brackets
Fits most transmissions
Two (2) 28" long safety chains for securing the transmission on the saddle
Telescopic 2-stage hydraulic ram for greater lift range
Steering handle fixed at the middle of the jack for easy transporting of load
Foot-operated pump and lowering pedal allow mechanic to position and align the transmission with both hands
Close the oil return handle before pumping through the pedal to lift the jack and open it to lower the Jack
Wide and stable 4-leg base with 4 cast iron swivel casters for ease of mobility
Strong heavy-duty steel construction for maximum durability
Easy installation with all hardware neededspecifications:
Max Height 72"
Min Height 34"
2- 28" Chains
31"x25" Base
Foot Pump
Red and Black Heavy Duty Powder Coat Finish
Multi Angle Adjustment
Easy Assembly
Steel 3" 360 Degree swivel Wheels
Includes all Hardware to secure a transmission
-
13
RedDog Zone 50 Ton Shop Press. Call to order: 519-535-2425
Remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with this versatile hydraulic press! This 50 ton hydraulic shop press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core.
Spring return ram speeds up your work
Hand operated winch for raising and lowering the bed
Name 50 ton Dual Speed Industrial Hydraulic Shop Press
Brand RedDog Zone Inc
Material Steel
Maximum working distance (in.) 26-1/4 in.
Maximum Working load (lbs.) 100,000 lb.
Minimum working distance (in.) 3 in.
Product Height 67-1/8 in.
Product Length 57 in.
Product Weight 645 lbs.
Product Width 31-1/2 in.
Shipping Weight 722.00 lb.
Size(s) 50 ton
Stroke length (in.) 6-5/8 in.
Width between channels (in.) 32-1/4 in.
Accessories Included Arbor Plateshttp://reddogzone.com/products/shop-equipment/reddog-50-ton-shop-press
-
14
Storage Containers, Cargo Shipping Container, Steel Container, Steel Storage Sea Containers, Shipping Containers, Steel Box, Storage Bins, Used Containers, New Containers.
Completely air tight and sealed used 20' and 40' sea marine container that will keep your belongings dry and safe over a long period of time!
Any order of a container will be delivered and unloaded to your specified spot at your convenience. The price for delivery depends on the destination within Ontario. Just call and inquire about our solution and our friendly staff will guide you through the process.Our Prices:
Used 20' - $2,250Financing and Leasing options are available as well!
We can Buy Back our Containers or Purchase your Unwanted Units! The price will depend on the Container condition and your location.We can also Modify your Container to fit your needs. Ask our representatives for details!
Call us today at: 1-888-531-7772
You can find more information about us on our website: www.ironcladcontainers.com
-
15
used briefly, as new OEM Deepsea PLC Remote Display Module DSE2520, for use with DSE7320 generator control panel. Please note, this is Genuine made in the U.K. Deepsea PLC, not a made in China knock off
New cost is well over $500.
-
16
- Shrink tunnel machine with oven model #MSI3
* All used equipment have 90 day warranty(Restrictions May Apply)
or call 416-253-5100 Ext 36
*We have large variety of used and new Restaurant Equipment at competitive prices!
* All used equipment have 90 day warranty
(Restrictions May Apply)
Canada Food Equipment Ltd's 150,000 Square foot showroom in Toronto carries the largest display of restaurant equipment in Canada!
Our web site
www.canadafood.ca
Our hours : Mon - Fri 9am -6pm
Canada food equipment
45 Vansco Rd.
Etobicoke ON
M8Z 5Z8
-
17
13 Sheets of 3/16” x 4’ x8’ Clear Acrylic for $135.00 per sheet.
-
18
LED Panel Lights are designed to replace traditional fluorescent troffer while providing superior light with virtually no maintenance. These state-of-the-art, edge-lit LED panels & are made with premium materials assuring you of optimum performance and the best lumen maintenance in the industry. Designed for residential and commercial suspended grid ceilings in 2’x2 size. Ideal for offices, basements, lightbox and signs, gyms, schools & more
-
19
Basler automatic voltage regulators, large qty's available
-
20
New and Instock -
260 Gallon Sandblast Cabinet is extra large in capacity & industrial grade
The 260 Gallon sandblast cabinet features a large front folding door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal.
The 260 Gallon sandblast cabinet is always ready when you are. The cabinet can be constantly connected to your air supply and is ready for immediate use when you step on the pedal. Use the sandblast cabinet to remove scale or heavy rust from automotive parts, clean up rusty tools, etch glass, or any other special application.
The 260 Gallon sandblast cabinet uses a powerful vacuum system to keep the work area free of "floating" rust and used glass bead shells. After the glass bead contacts the surface to be cleaned, a portion of the bead is "destroyed" becomes almost weightless. The vacuum system removes the "floating" rust particles and the "used up" glass beads.
The 260 Gallon sandblast cabinet has a foot pedal that controls the flow of abrasives from the air gun. The foot pedal allows the operator to concentrate on the work to be done inside the cabinet rather than hold the trigger of a gun.
Features:
Large folding front door
Foot operated industrial blast gun
Internal fluorescent lighting system
Powder coated steel construction
Heavy duty foot pedal design with brass flow valve
Gas strut to assist front door opening with 2 x safety interlocks
Built in motor vacuum and filter system at rear of sandblast cabinet
Air regulator
Perforated steel flooring-abrasive large particle-separating screen and clean-out door
Eliminating typical suction pick-up tubes and hoses
Natural rubber/vinyl blast gloves
110V Power
Overall size: 52 1/2" Wide x 48" Deep x 69 1/2" High
Work Volume: 46" Wide x 35" Deep x 33" HighSpecifications:
Overall Height: 69 1/2"
Overall Width: 52 1/2"
Overall Depth: 48"
Work Area Width: 46"
Work Area Depth: 35"
Work Area Height: 33"
Window Dimensions: 12" x 26.25"
Power Gun: Heavy Duty foot pedal w/ Gun
Nozzles: 4 ceramic (2) 6MM & (2) 7MM Included
Gloves: 24" gauntlet
Machine Weight: 352 lbs.
Vacuum: Attached vacuum system
Air Requirement: 24 cfm/50-125 P.S.I.
Power: 110VIncludes:
Gloves
Air regulator
Internal low-voltage light
Industrial duty blast gun and 4 ceramic tips (2) 6MM & (2) 7MM
Heavy Duty Foot Pedal
1 roll sealant tapehttp://www.reddogzone.com/products/sand-blasters/reddog-990l-sandblaster
-
21
Save your hands, save the environment and start recycling now. Cash in big time by using the BWS-60 to get top dollar from your scrap wire. You will be amazed at how well this machine strips wire and how reasonably priced it is. If you purchase this machine you will be very happy with the quality. Don't pay more for a single blade wire stripping machine when you can have the best for our amazing price! Remember - the 60 in BWS-60 stands for 60 MM or 2 3/8" wire thickness which is the maximum this machine will strip.
NOTE: The BWS-60 comes comes with 2 FREE BLADES
This is a heck of a deal! Strips wire from 16 GA to 2 3/8"
-Hardened Tool Steel Blade. 1.5" HP Motor capable of 75 ft p min. 1 year warranty. Easy blade maintenance. Top Quality Machine. - Adjustable blade height with motor feed design - Refined adjustments for easy control and setup
- Strips wire form 16 GA to 2 3/8 INCH
- Runs on 110V single phase or 75 FT/MIN - Parts readily available
- Heavy Duty Gear Box - Blade is made from high strength tool steel for long lasting life
- Comes with 2 Extra Blades and Maintenance Tool Kit
- WT: 110 LBS.
- Machine Dims: 12.5" x 15.75" x 20.5" -This machine will strip Romex / PVC / Rubber / Plastic coated wire.*This machine is not designed to strip aluminum shielded wire
For more details: www.copper-wire-stripper.com
-
22
Klingspor Grinding Disks
7" x 1/4" x 7/8" - 30 pcs in a box
$3 each or $29/box
-
23
BWS-5000-WS1
Knoweledge is power and knowing your weight is critical when dealing in scrap. Especially copper scrap! The BWS-5000-WS1 will allow you to know your weight before you go to the scrap yard! Never get ripped off again.
The Bluedog Wire Stripper - 5000 lb weigh scale.
Details: 5000 lb weight Capacity
Heavy Duty Checker Plate Design
Bright Red LED Display with Battery Backup
Easy to setup. Just plug in and gohttp://www.copper-wire-stripper.com/products/weight-scales/bws-5000-ws1
-
24
Pneumatic power gripper
BTM corp PCO-100-H-110
Price per piece
-
25
Buy with confidence and hand pic your own sea box! Open with social distancing.
Storage sea containers with130 to view and hand pick.
Sizing in 10.20.40.45ft
Used
Used refurbished new paint
New one trip in 7 specifications and 4 colors.
8.6 and 9.6 high available.
Pricing starts at $1,800 for sealed construction grade.
Once selected from our large selection delivery made province wide within 1 to 2 days by our 5 trucks.
Shipping province wide.
See our web site for more information at vbinc.ca.
___________________10ft. 20ft 40ft. 40ft HC. 45ft sea storage containers.
-
26
Jack Posts have a certified working capacity of 18,602lbs
All are CWB certified
Come in two standard sizes:
Jack Post 3.50'' x 7' to 7' 4'' - BHRT125350RD
Jack Post 3.50'' x 7' 2'' to 7' 6'' - BHRT12530RD
Custom lengths are available upon request.
All Post are primed grey.
80-84 - 71'' Tube - $87 for 1
84-88 - 81'' Tube - $88 for 1
88-82 - 89'' Tube - $90 for 1
92-96 - 89'' Tube - $92 for 1
96-100 - 93'' Tube - $94 for 1
Please contact for prices on large quantities. we do reduce the price each on orders over 100 jack posts
519-485-2181
519-424-2681
-
27
Heavy Duty Shop Press
10" stroke, 91" tall, 60" wide, 42" between posts, 19" deep
Can be built with custom dimensions
Contact Bill for custom pricing
-
28
The 2,200lb capacity, manual stacker is available in (3) different maximum lift heights and is designed for light-duty lifting of loads, skids, racks and objects. Loads can be lifted by the handle or by a fold-away hydraulic foot pedal. Forks and straddle legs can adjust from side to side to accommodate different skid widths.
This ergonomic stacker is also equipped with an operator protection screen, wheel lock, dual-push handles mounted to the mast at a comfortable height, and a spring-loaded steering handle with comfort grip. Excellent value!
Pricing on each unit is available on our website www.liftequip.net
Call/text 289-680-6930 or email ryan@liftequip.net
We deliver anywhere in Canada.
-
29
I have a 30 foot new idea elevator for sale, still works mint, comes with electric motor and 100ft cord wired into the motor, reason for selling i bought a new one that is belt driven. Asking $1,000 or best offer. Call or text Brandon at 226-228-4417. Thank you
-
30
3/0 loco cable. 2 pieces approx 30' long
Make a fair offer.