Buy and sell, Tools, Power Tools with in Canada, Alberta.
-
1
https://www.amazon.ca/Bosch-GBH18V-45CK27-PROFACTOR-Connected-Ready-Exclusive/dp/B09FFV745Q/ref=sr_1_1?crid=NDV57DUQSW83&dib=eyJ2IjoiMSJ9.yP-tPCUYgk4C25ZmkmG1xA.rGyYvzLLl1U1Q_A86tyWFCCuZfXwkRRuR0YKhHWVHuE&dib_tag=se&keywords=bosch+18v+hitman+45ck27&qid=1712768900&sprefix=bosch+18v+hitman+45ck27%2Caps%2C176&sr=8-1
-
2
71/4” skill saw. Used very little comes with 4 brand new blades $70 obo
-
3
Maybe 15 nails through it. Battery was never used.
-
4
Myford super 7 lathe 3.5" X 19" with 4" 3 jaws chuck.
Comes with original tools and manual. (includes bench it attached to)
runs good with no issues.$2000.00 obo
-
5
Battery holder for dewalt or millwalkee batteries . Wall mount 3d printed new . Great for organizing your batteries on the wall and have more space in the drawers for other parts Asking 10 dollars a piece minimum 5 pieces and you can pick up or we deliver to these towns.
Lloyd minster
Vermillion
Elk point
St paul
Bonnyville
Coldlake
-
6
TheWhacker plate tamper. Bought for project at home, no longer need it. Will swap for a outboard kicker motor ( 8-20 hp) or $1000
-
7
Rolling Shelf. Swivel castors on all 4 corners.
48" w
20" d
64" hHeavy duty shelf, good for garage or commercial use.
-
8
Extra charge for shipping if needed
Size small
New never used
Worth $200 reg. price
-
9
4-1/2 inch angle grinder used once been sitting in the garage since comes with guard and handle and two brand new packs of discs 70$ for all will sell separately as well
-
10
Mobile base makes any tools mobile such as saws, tool chests, etc. Expandable.
-
11
Millermatic 180
Helmet and gauges,
-
12
$35
TOOLS ONLY
Brand new
Crarftsman 1/4 impact
Driver kit
No batteries and charger
Meet up or pick
West end closed to
Wem mall
-
13
Never used comes w box asking 100 obo
-
14
All set of 4 $20 heavy steel used $5 each
North Edmonton location
Selling extra tools
No refund or return no shipping cash payment upon purchase
-
15
Cordless drills availabile.
Also cordless light. 20.00
With batteries
Drills 30 each
light 20
-
16
This is an overstock item from last year. Item has never been used or set up. Item has been sitting outside for the past year. Item purchased for $5040.
Features
Reinforced, fully welded industrial use structure with a powder-coated steel frame finish can hold its own on any job site and is resistant to rust and corrosion
Automotive engine type rubber cushions added on the base to reduce vibration and noise while operating as well as reducing wear and tear over time
Diesel oil fired burner with stainless steel housing that can heat water to approximately 85℃ in just under three minutes for more cleaning power
Flame detector integrated to provide signals with accurate timing for the fuel pump and 12V DC ignitor ensuring reliable startup on every use
All-in-one operation control panel that includes an adjustable thermostat, on/off switch and easy-to-use water pressure settings
Compact design and attached lifting bar for convenient mobility while working, between job sites and taking in and out of storage
100’ high pressure ⅜” hose with a hose reel mounted allows you to work around big vehicles or farm equipment and also cover large floor spaces, driveways or buildings
Specifications
Pressure range: 3500-4000 PSI
Flow rate: 4.0 GPM
350,700 BTU per hour
Burner coils: 20mm, 12 GA
Temperature rises to 85 °C in 2.5 minutes (average)
High-pressure hose: ⅜” x 100’
Five quick coupler nozzles: 0°/15°/25°/40° and one chemical
Downstream chemical injection system
Water supply: Tap water
5-gallon poly fuel tank
13” pneumatic tires
Pump:Triplex plunger pump
Oil bath crankcase
Thermo pump protector
Gearbox drive
Stainless valves
Brass manifold
Engine:14 HP Kohler CH440 Command Pro Series Engine
Displacement: 429 cc
Starter type: Recoil & electric start (battery included)
Cast iron cylinder liners
Oil Sentry automatic shutdown
Accessories:100’ high pressure hose and hose reel
3’ spray wand and gun assembly
Five nozzles
-
17
220v input , 24v output battery charger for electric pallet jacks and fork lifts. 220v input. $525.00 OBO Don't waste you time sending text or kijiji message as they can't be answered, give us a call at 780-970-238six if you are interested in acquiring this item..
-
18
Flooring Cutter
-
19
Selling as complete set - Ideal for roofers
Dorsal D-ring
5 points of adjustment (2x legs, 2x torso, 1x chest)
Capacity: 160 kg (352 lb.)
X in PVC that prevents tangling
Easy doning leg straps
CSA Z259.10 Class A and ANSI Z359.1 approved
Manfactured 04/2022.
-
20
$5 each
Second hand used selling extra tools
-
21
Miller 25' tig torch
Never been used. Bought it forever ago but isn't compatible with my old machine so here it sits.
$200.00 obo
-
22
Air hardwood floor nailer. Comes with box of nails and hammer.
-
23
Drop Zone brand tool belt suspenders. Made from 1” and 2” webbing. Designed to hold up your heavy tool best while providing maximum support to your shoulders and back. Has end loops that will attach to any brand tool belt.
$10
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
24
Used for one house and probably less than a thousand square feet of hardwood. Works great and like new. Everything is in the Box including instructions. New price is over 250
-
25
Powerful 2.5 Amp. Motor. Accepts up to 1/2” shanked drill bits. Heavy-duty cast-iron table and base. 5 speed (620-3100 spindle RPM). Spindle is supported by high quality ball bearings. 45-Degree tilting table for angular drilling Positive depth stop for quick and easy adjustment Comes with 1/2" drill chuck and key.
Model # KC-180N 8"
This was purchased in September of 2022 form Rona for $135 and was never used.
-
26
Fairview's 90° Male Pipe / Compression
ElbowBrass Needle Valves are pressure rated up to 150 PSI WP.3069-4A
1/4 TUBE X 1/8 MALE PIPE, 150 PSI30 available
-
27
Freud 10 piece Router Bit kit. Brand new never been used.
-
28
Durable aluminum spring-loaded frame mount attaches to any brand hard hat. Comes complete with a plastic face shield and a new spare face shield. Safely protects your eyes and face and gives you maximum visibility while operating a chainsaw, grinder, or any other application.
$25
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
29
10 sockets, 10 thru 19 mm, 6 point deep 1/2” drive. Brand new and unused. Call or text me, open to offers but will ignore low ballers, check the truck price you’ll find these are a good buy. Quality sockets with lifetime guarantee.
-
30
for banding steel strapping
-
31
Toolbox - Triumph/Snap-On Special Edition
Dreaming of building the ultimate enthusiast garage? Triumph is proud to partner with high-end tool manufacturer Snap-on to offer this custom Triumph-branded specialty toolbox. Originally designed for use in Triumph dealership service departments, this premium Snap-on KRSC46H one-piece fully welded box offers flawless performance, high strength, long-term durability and makes a simply stunning addition to any gearhead’s garage. Expandable with accessory panels to provide flexibility for the future. Numbers are extremely limited, so act fast before they’re gone!
Spec/Dimensions:
Depth: 20in
Height: 46in
Width: 40in
Net Weight: 265lb
No. of Drawers: 6
Square inches: 4,392
Top Compartment Dimensions, inches: 39-13/16 W x 18-13/16 D x 4-13/16 HPriced: $ 2999.99 + gst
** NOTE: Scuff on rear lower by wheel picture shown **Precision Powersports Ltd.
Hours: Tues-Thurs 9am-5pm Sat 9am-1pm
Please call or email:
(P) 403-394-6228 (TF) 1-888-494-6228
(E) parts2@ppslethbridge.com
-
32
Super sweet plywood garbage bin. Fresh paint job. Pretty good castors. Measurements are 52 1/2” in length and 28” wide standing 40” high. Been used for renovations and still has lots of hauling days left in the tank. Looking to get $150 or so. Make a offer. Have 2 more like this one and two more smaller ones if interested.
-
33
Reese Elite R18 5th wheel hitch with Rails , came off a chevy Duramax , 18,000 lb rating $500 OBO
-
34
MASTERCRAFT DAMAGED BOLT AND NUT REMOVER KIT
-
35
Pair of Slick Locks. Installed in the last year, recently lubricated. Smooth operation.
Pair comes complete with brackets, covers and 2 keys
Brackets are for sliding side door and rear left/right opening doors. If different brackets are needed - They are cheap and easy to get.
-
36
We ARE the lowest price supplier of Pump Jack related equipment.
We also have a fully stocked selection of Frame Scaffold and Ladder Product.
Please call or email for more information. www.sturdyladder.com
-
37
Big red jack 2 tonne. Great shape. Pick up west end edmonton. 80$ obo.
-
38
Including 45 Sea-Can. Large inventory of water and sewer fittings, road signs, barracades, pvc plugs, misc water and sewer supplies.
Todays Value $150,000
Selling $75,000
-
39
New in package.
2 available.
-
40
Used in great condition
-
41
Makerspace in lloydminster Alberta. Come enjoy the benefits of lloydminster a makerspace. Welding blacksmithing power hammer coal forge gas forge hydro dipping wood shoptwenty four inch planer 18 inch bandsaw cabinet saw spindle sander five by ten foot Cnc router twenty four by thirty six inchCnc laser 3d printers pottery slab roller pottery wheels extruded sewing leather working jewellery making electronic tools pottery silk screening LegacyDiy.com prices start at 79 dollars a month
-
42
Each one good.
No holes
Older relatives moved to condo and no longer need
Small ones $10 each
Large ones $15 each
Bulk deal if buy more than one
-
43
Nothing wrong with it however one of the leads broke so it is just the multi meter. Bought for school and no longer need it
-
44
Makerspace in lloydminster Alberta. Come enjoy the benefits of lloydminster a makerspace. Welding blacksmithing power hammer coal forge gas forge hydro dipping wood shoptwenty four inch planer 18 inch bandsaw cabinet saw spindle sander five by ten foot Cnc router twenty four by thirty six inchCnc laser 3d printers pottery slab roller pottery wheels extruded sewing leather working jewellery making electronic tools pottery silk screening LegacyDiy.com prices start at 79 dollars a month
-
45
Machine comes with soft and hard jaws, OD turning and ID boring tools. 10inch chuck max 4000rpm
-
46
Faster length2”-3-1/4” (50-83mm)
.113-.131” (2.8-3.3mm)
70 MIN psi 120 max
-
47
Freeing up space
-
48
5 pair 35 for all
-
49
Excellent condition Scott airpacks for sale with 4 masks and pelican cases they need recertification
-
50
10 inch Simoniz power polisher. Used once. New $100.00 . Asking $65.00. 780-872-0866