Buy and sell, Tools, Power Tools with in Canada.
-
1
Looking for stihl 056 magnum parts, carcasess or non running saws. Must be willing to ship to me at my cost.
-
2
Generator has about eight hours run time total.
Electric start. Comes with a battery tender.
Model 10046 purchased new in September 2019.
Unit has an hour meter.
-
3
One inch drive air impact. Very little use. $199.00 Phone 306 862 7524 OR 306 862 7761 Nipawin Delivery to some parts of the prairie provinces is possible.
-
4
12500 BE Tri Fuel Generator. Brand new still in box.
-
5
Dont know much about it. My highschool gave it to me. Belt can be vertical or horizontal. Worked great in shop class. I dont have room for it I want it gone.
-
6
Snap on/ Mastercraft / Herbrand. Air Tools. And some specialty tools.
Husky tool box. Snap on cabinet for side hang or wall plus 2 drawer
Box
-
7
Heavy duty 6-inch horizontal belt sander, about 20 years old. In good working condition.
-
8
MAKE A OFFER ON ALL OF THE TOOLS CALL 705-339-5151 ALL TOOLS ARE REDUCED tools reduced until the end of april only 50 DOLLARS Job mate mitre saw brand new with dust bag -dollars
job mate circular saw used 25.00 DOLLARS
mastercraft reciprocating saw used selling for 25.00 DOLLARS
black and deckerjig saw used selling for 15.00 DOLLARS
all tools work just fine mitre saw is brand new
FIRST COME FIRST SERVE EVERYTHING WORKS AS IT SHOULD ALL FOUR TOOLS BEST OFFER,TOOLS WILL ONLY BE AVAILABLE UNTIL THE END OF APRIL.
-
9
Slightly Used Mastercraft bandsaw for sale. 9"" blades, 2 speed.
-
10
Brand new Little Ripper Sawmill.
Fits in the box of a pickup.
3500.00 comes with 6 blades and an extra 4 foot section of bed, for a total length of 16 feet. Basically save the tax and get the extra 4 foot section for free.
-
11
Used 12" blade Delta mitre saw for sale.
-
12
Used DeWalt planer for sale, slightly used.
-
13
See package pic for specs.
Located in Bridgewater
-
14
Reliable Power Force King 4200W gasoline generator. Great for backup power or projects. This model KCG-4200G has 4200W peak and 3500W running. New Spark Plug and Oil Change ready to use! Reason for selling is because we are upgrading to a larger model. $300 Obo located in Chelsea
-
15
Like new, works great
-
16
A spokeshave is a hand tool used for shaping wood, particularly for creating curves and rounded edges. It consists of a blade set in a body with handles, allowing the user to shave off thin layers of wood. Spokeshaves are versatile tools, used by woodworkers, wheelwrights, and artisans for various tasks, from shaping chair legs to creating curved surfaces on boats
-
17
New in box .Telescopic ladder 15'
-
18
New DeWalt DCB1106 20V Max lithium ion battery charger that was just removed from a new tool kit. This is an OEM DeWalt charger and not a replica aftermarket charger. The DCB1106 puts out a 6 amp charge rate and it will work with all DeWalt 20V Max, 60V Flexvolt, 20V PowerStack, and all DeWalt 12V Max batteries. I am located in Karwood Estates, Paradise and my price listed is firm.
***** Please call or text 709-682-8014 for the fastest response *****
-
19
Portable 9 Gallon Gas Air Compressor Dual Tanks Honda GX 270 Engine
-
20
Great condition. Reason for selling- shift in operations. No issues with the unit(s). Stock images for reference only.
2016 Husqvarna PG820RC 480V concrete floor grinder
2016 Husqvarna DC6000 480V dust extractor
The 2016 Husqvarna PG820RC 480V concrete floor grinder is designed for various applications, including:
Concrete Floor Preparation and Repair: Ideal for industrial applications, it effectively prepares and repairs concrete floors.
Polishing and Grinding Applications: Suitable for both wet and dry grinding tasks, making it versatile for different projects.
High Productivity: Features Dual Drive Technology for enhanced productivity and ergonomic operation, allowing for simultaneous tool preparation and machine operation.
Remote Control: The grinder is equipped with a remote control for easy operation and transport, reducing exposure to vibrations and sideway forces.
3
This grinder is perfect for professionals looking to maximize efficiency and effectiveness in their concrete floor work.
Husqvarna DC6000 3‑Phase Industrial Vacuum (also sold as Husqvarna DC6000 Dust Collector and Husqvarna Dust Collector DC 6000) is a heavy-duty industrial dust extraction system designed to handle large volumes of dust and debris from surface preparation equipment in commercial and industrial settings. It’s a three-phase (480 V) unit built to match high-output grinders and cutters — especially concrete floor grinders.
Ideal for concrete grinding, cutting, shotblasting, and surface prep — particularly on large jobs where significant dust is produced.
Used in manufacturing, metalworking, heavy renovation, and industrial maintenance where airborne dust must be contained.
Safety & Regulatory Compliance
Helps meet OSHA/health and safety standards for dust control, especially for silica dust generated during concrete work.
How It Works
Cyclone Separation Technology – patented double-shell cyclone system removes ~95% of dust before it reaches the filter, prolonging filter life and maintaining suction.
Automatic Filter Cleaning – keeps airflow constant during long shifts without frequent manual intervention.
Longopac Bag System – allows safe, dust-free disposal into sealed bags (often Husqvarna DUST BAG LONGOPAC | DC 6000).
Key Benefits
✅ Exceptional Dust Control
Captures and retains fine hazardous dust (like respirable silica), greatly reducing airborne particles.
High Productivity
Constant high airflow and automatic cleaning mean minimal interruptions, even under heavy load.
️ Improved Safety & Air Quality
Creates a cleaner, low-noise work environment, protecting workers and reducing cleanup time.
Industrial Durability
Built for tough jobsite conditions with rugged construction and easy transport features.
Seamless Integration
Often paired with Husqvarna surface prep machines like PG 820, PG 680, and PG 530 grinders.
Typical Specs (480 V Version)
Voltage: 380–480 V, 3-phase
Motor Power: ~7.7 hp (~5.75 kW)
Rated Current: ~15.9 A
Airflow: ~406 CFM
Maximum Vacuum: ~3.05 psi
Weight: ~640–670 lbs
Wet and Dry Use: Yes — flexible for different jobsite conditions.
Who Benefits Most
✔ Large commercial and industrial contractors
✔ Concrete and flooring professionals
✔ Renewable energy and manufacturing facilities
✔ Companies needing to comply with strict dust regulations
Serious inquiries only. Message to view.
-
21
Brand new (unused) authentic Dewalt 20V Max XR Powerstack 5 ah lithium ion battery (4 available). I am located in Karwood Estates, Paradise and my price listed is firm, thanks.
***** Please call or text 709-682-8014 for the quickest response *****
-
22
Have 11 old chainsaws for sale, some have ran recently and some haven’t ran for years
In kenora
-
23
http://www.brighterfuturesolar.ca Call us to learn more today or a get a quote and start your Solar Journey
Take Control of Your Home, Farm or Businesses energy needs today and Discover the power of Solar through our custom Ground Mount kits
Each quote and systems is designed by our solar experts to not only match your exact energy needs but ensure you a long lasting quality system and pricing.
We offer a large variety of options to ensure your exact needs are matched but also to provide you the best costs and systems. With our custom systems and designs
this allows us as well to offer self set up plug and play systems We work directly with you, providing everything you need save upwards of 40% in cost while also receiving guaranteed quality customer support through the entire install. We love to answer any questions as well, are you Looking to start small and grow you system or expand a current system, ask about our easily expandable systems that allow you to grow over the years as you need or want or our off grid features on new or current systems.
Experience Energy Security like never before & take your Power into your control even in the most Critical moments.
Custom Financing options available
Both Grid Tie, Battery Backup & Full Off Grid Options Available
To Learn More about our Custom Ground Mount Racking Kits Give us a Call Today to speak to one of our Solar Specialist
-
24
Full size table saw. Good working condition.
Moving into a van no room for it.
-
25
New generator used 4 half days to finish a job,while my big honda was in shop.great light weight good on gas and compact easy load and unload
Be 4800 model pick up coleman road Courtenay. Can deliver if needed
-
26
Honda driven two stage compressor.
Can put out at 175 psi.
-
27
Almost impossible to find “OG” professional scroll saw. Used by a hobbyist for several years but in great shape. See link to blog review
https://scrollsawer.com/excalibur-scroll-saw/
-
28
Very lightly used compact bandsaw by King Canada. See link for details.
https://www.kingcanada.com/en/products/woodworking/bandsaws---wood/kc-902c-9-wood-bandsaw-with-laser
-
29
Professional quality scroll saw
Features:
Professional quality scroll saw with 1.3 Amp DC motor
Includes XL-100 Foot Switch
Variable speed (400-1550 strokes/min)
Built-in dust blower system
Tool-free blade change system with blade holders which accept standard 5" pinless blades
Entire head tilts up to 38° to the left and up to 45° to the right for angled cuts
Large 13-1/2" x 23-1/2" stationary table with built-in 2-1/2" dust chute for dust collector hook-up
-
30
Magnesium circular saw. Has case and 4 used blades. Used very little. Can meet/deliver in area around Creston. Cash only. $125.00.
call 250-four six four-5246
-
31
MetalTech Safeclimb 6 ft. Baker scaffolding in very good condition. We did not use it much. Specs:
6 ft. x 6 ft. x 2.5 ft. Baker Scaffold
1,250 lb. Load Capacity
-
32
Used by me, an old home owner. Corded Dewalt Sawz All with case and a couple of new blades. Good saw for the bucks. $85 obo.
-
33
Only 80 hrs of use, like new, location Gray Creek, BC
-
34
PLEASE READ ENTIRE AD...
Yes, it's available!
Located in Gray creek.
Periodically travel between Crawford Bay and Creston and seldom to Nelson.
Like new Stanley 1.5inch gas water pump, works great! No issues. Bought and used as backup but never needed as the other one always works. No sense in keeping 2. No hoses come with as I use them on my water pump. Hoses can be bought at hardware stores or online.
I've only ever put ethanol free marine fuel through it. Has clean engine oil (Rotella and Lucas stabilizer). Air filter is immaculate as is the spark plug. It's ready to work!
$220 cash, Or....
May consider trades of higher value or a combination of cash and trades depending on what you have to offer?
Such trades as Chainsaws (broken or not), gas powdered leaf blower, gas inverter generator, working 12v deep cycle batteries, greenhouse, shed, shelter logic, metal detector or possibly something else offgrid applicable?
Please check my other ads. Thank you :)
-
35
A Logan Simples 60" mat cutter, Model 760 in like new condition. Comes with straight and beveled cutting tools. Ships within Canada and rate determined by purchaser's location.
-
36
reciprocating saw, with four blades, 20V battery, charging station and storage bag. Compatible with DeWalt batteries. Great for small jobs, tree branches, plumbing pipe etc.
-
37
3/8 drive Ratchet with, two 20V batteries, charging station and set of sockets
-
38
Only used for a few projects, the saw comes with a folding universal stand as shown in pictures.
-
39
A VENDRE - FOR SALE
Milwaukee 5378-20 - 1/2 in. Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM
The power to drill ½" holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, ½" Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drills lightweight, balanced pistol-grip design reduces fatigue during a long work day.Powerful 7.5-amp dual-torque motor: Optimized for concrete fastening with overload protection. Choose trigger-speed control in two ranges: 0-1,350 RPM/0-22,000 BPM or 0-2,500 RPM/0-40,000 BPM
2-Mode operation: Drill-only mode for wood, steel and plastic; hammer and rotation setting easily sets concrete screw fasteners and drills small holes for anchors.
2-Speed gear box: Select the correct drilling speed for the material and accessory
Self-stopping brushes: Protects the motor and increases the life of the tool.
MADE IN GERMANYUSED A COUPLE OF TIMES, EXCELLENT CONDITION
_______________________________________
Milwaukee 5378-20 - Perceuse à percussion à double couple avec poignée pistolet, 1/2 po, 0-1350/0-2500 tr/min
La puissance de percer des trous de ½" dans le béton. La polyvalence pour exceller dans les applications sur bois et acier. Cette puissante perceuse à percussion de 7,5 ampères, 1/2", dispose d'un contrôle de vitesse à double gâchette sur deux plages, avec plus de puissance pour les applications les plus difficiles ou plus de vitesse et moins de couple pour les applications plus légères. Utilisez-la pour percer dans le bois avec des mèches plates, des scies-cloches, des mèches tarières et des mèches Selfeed, ou dans l'acier avec des mèches hélicoïdales et dans le béton avec des mèches à percussion. La poignée latérale amovible aide à régler la tige de profondeur pour un perçage de trous pré-réglé. Le boîtier d'engrenages en métal résistant supporte l'utilisation quotidienne sur le chantier, tandis que la conception légère et équilibrée de la perceuse avec poignée pistolet réduit la fatigue pendant une longue journée de travail.Moteur puissant de 7,5 ampères à double couple : Optimisé pour la fixation dans le béton avec protection contre les surcharges. Choisissez le contrôle de vitesse par gâchette sur deux plages : 0-1 350 tr/min/0-22 000 coups/min ou 0-2 500 tr/min/0-40 000 coups/min.
Mode de fonctionnement 2-en-1 : Mode perceuse uniquement pour le bois, l'acier et le plastique ; le réglage de percussion et rotation fixe facilement les vis de béton et perce de petits trous pour les ancrages.
Boîte de vitesses à 2 vitesses : Sélectionnez la vitesse de perçage correcte pour le matériau et l'accessoire.
Balais auto-arrêtants : Protège le moteur et augmente la durée de vie de l'outil.
FABRIQUE EN ALLEMAGNEUTILISE QUELQUES FOIS SEULEMENT, EXCELLENT ETAT
-
40
Scarifiers have been designed to leave a clean, textured or rough finish on any type of concrete or asphalt surface. Drums are available to provide cleaning, texturing, leveling, grooving and paint removal. The unique engage/disengage lever allows the operator to raise and lower the drum without losing the depth setting. Drums are interchangeable and provide for fast and easy changeover.
-
41
Please see list below of Frame Scaffold equipment F.O.B Dartmouth Skyway Canada while supplies last. All sales must be pre-paid by Visa prior to pickup.
-Aluminum Plywood Deck 10' x 19" $213.24 each
-Aluminum Plywood Deck 7' x 19" $155.33 each
-Mason Frame 5' H x 5' W $79.95 each
-Mason Frame 3' H x 5' W $72.46 each
-Ladder Frame 5' H x 30" W $71.72 each
-Cross Brace 10 x 4 $27.16 each
-Cross Brace 7 x 4 $21.08 each
-Cross Brace 10 x 2 $25.45 each
-Cross Brace 7 x 2 $18.73 each
-Guardrail 10' $13.74 each
-Guardrail 7' $10.02 each
-Solid Screw Jack 24" x 1 3/8" $26.95 each
-Coupling Pin/Spring Clips 9" x 1.44" $2.88 each
-Scaffold Caster 8" $32.34 each
-21" Side Bracket (Frame) $36.25 each
- 7' x 19" Deck Plywood Replacement $44.00 each
-10' x19" Deck Plywood Replacement $58.00 each
- Plus HST(Sale Items!! 25 sets of 5' W x 30" H Mason Frames, braces. coupling pins) fits 7' Wide Scaffold)
$127.12 each set plus HST
1 set = 2-5'W x 30" H Mason Frames, 2-7 x 19.5 Brace, 4-coupling pins(Sale Items!! 25 sets of 5' W x 30" H Mason Frames, braces. coupling pins) fits 10' Wide Scaffold)
$138.92 each set plus HST
1 set = 2-5'W x 30" H Mason Frames, 2-10 x 19.5 Brace, 4-coupling pinsOrders can also be completed on-line at: www.skyway-onlinesales.com
-
42
Karcher. “Honda 6.5 HP Engine” 2600 psi Will work with hot or cold water equipped with soap dispenser. Used it very little to wash my truck when I was trucking.
-
43
250/300 gallon water container. Some are 250 gallon and some are 300 gallon containers. We have a limited quantity. Plus we have plastic 55 gallon barrels only $30 each or 4 for 100,,,,,,,,, call or text 204-857-2555
-
44
Ozone generator:
Ozone is very effective in eliminating odors including tobacco smoke, human and pet odors, food odors, mold and mildew odors, garbage odors, renovation odors and much more. It totally destroys the offending gases that are the source of everything we smell. Unlike many other deodorizing methods, ozone actually searches out and destroys the problem gases.
-
45
Like new Milwaukee 2679-20 force logic crimper, one key compatible
Includes full die set from #8-600mcm
Includes case, one 4.0 & one 2.0 battery
Located in gp
-
46
This industrial grade tool cabinets and work benches were designed, tested, and built to last. Various models available. Choose one for yourself. It will look great in any garage.
o High capacity, full extension ball bearing drawer slides/three rail sliding system.
o All welded steel construction
o Industrial paint finish resists rust
o Secure detents keep drawers closed
o Heavy duty industrial quality
o 100 lb weight capacity per each drawer
o Non-slip pre-cut drawer liners in all drawers
o Locks keeps your tools safe and secure
o Production process: Cutting – bending – welding – powder coating
o Anti-corrosion Treatment: Degrease – descaling – phosphating – powder coating.
The following models are available:
(1) 10 ft Stainless Steel Work Bench
o Dimensions: 112 x 23 x 71 inches
o Weight: 700 lbs
o ONLY $1,999 + GST - BLOW OUT SALE
o $350 delivery anywhere in Calgary
-
47
Yamaha 2800i generator. Very low hrs. Works perfect. $1000 obo
-
48
1 box nails
-
49
I have had this tester for many years and only used it once when I had a contract job installing a tower in Gabon, Africa!
It's in great shape, no dirt and no damage.This is used to check the earth ground resistance for electrical purposes. It is not acceptable to just through a wire under the grass and expect it to dissipate a lightning strike or something similar for a home or some other structure. A low ground resistance is essential for electrical protection as per code.
I needed this as I was working in the lightning protection industry in Calgary, Vancouver, and Africa between 2012 and 2014. I needed a small one to go overseas with me because of restrictions on size and weight. This fit the bill perfectly. I have another, larger unit that is well used and am keeping that for the time being. It has comes with a nice carrying case that holds everything.
Here's a link to the manual: https://www.google.com/search?client=firefox-b-d&q=cem+dt+5300b+manual
I am open to offers!
-
50
New in box model 9005b 793 2969