Buy and sell, Tools, Power Tools with in Canada.
-
1
12 drawers, 36" inches wide, 62" tall, caster wheels no dents or dings. Tools not included .
-
2
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
3
Great air compressor about 10-12gallon tank. Works good, 110volts 3/4hp motor. Auto shut off at 100psi. No leaks works as it should.
-
4
Brand new battery
-
5
Average Return on investment when switching to LED is under 18months. That means the initial cost is saved within 1.5 years and pure savings beyond that Upwards of 80% on your power bills. With the rated lifespan of 50,000-100,000 hours, potential savings in the tens of thousands is commonplace for business and commercial purchases.
Visit us at https://levkomlighting.com/Benefits to LED include
**No effect from cold weather
**Instant ON - No Warm-up required
**No delay to full brightness
**Longer Life span up to 100,000 hours
** 5 Year Warranty
** They Use Less power
Some of our products include but are not limited to:
LED High Bay Bulbs/Fixtures DLC certified High Bay Replacement Fixtures starting at Only $239
See an annual Savings of 65% over the current 400W Sodium vapor lights.
LED Replacement bulbs for T8/T12 fluorescent tubes 4ft/18watt Ballast Bypass On sale only $18
8Ft Ballast Bypass Only $50
Linkable Linear Standalone Fixtures, 4ft $37
LED Corn Bulbs = IP64 Waterproof rated
27watt = 300watt incandescent only $45
36Watt bulbs are only $54
54Watt Bulbs are only $79
120W Mogul Base $199
LED Street/Yard lights w/ Dusk dawn sensor
100watt = 400watt Metal Halide, Only $279
150watt LED Yard Light - 500W Metal Halide Only $349
300watt LED Yard Light Only $579 = 1000W Sodium Vapor equivalent
Please contact 306-612-3010 or Toll-Free 1-800-801-2585
All orders shipped next business day from our Saskatoon Warehouse
-
6
FINANCING AVAILABLE - WWW.HOCANADA.COM - 1(844)440-40144
The House of Contractors Inc. WPS Power Screed features a unique blade profile that enables a single operator to quickly and accurately strike off concrete floors using a single blade for both form-to-form and wet screeding. The screed's vibratory action embeds aggregate and reduces air voids, producing a strong dense slab, while eliminating the strenuous, time consuming labor of manual screeding. The screed comes in 2 engine types:
WPSC2 Power Screed - $1099.99 (1-Year Machine Warranty (2-Year Engine Warranty))
WPSH2 Power Screed (Honda Engine) - $1399.99(2-Year Machine Warranty (3-Year Engine Warranty))
Features
- Lightweight and easy to transport, assemble, and operate.
- Specially designed to permit a single operator to quickly and easily level an entire area.
- Handle vibration is minimized with our impact absorbing mounting system to optimize control and operator comfort.
- Superior control is achieved with our responsive handle mounted throttle and on/off switch.
- High frequency vibration disperses and levels concrete without build-up.
- Lightweight, easy to transport to and around job sites.
- Blade design permits cutting and smoothing in a single operation.
- Interchangeable blades with other leading wet screed units.
Screed Blade Pricing (Free Shipping Nation Wide)
- 6.5 Foot $404.99
- 8.5 Foot $514.99
- 10.0 Foot $1129.98
- 11.5 Foot $989.99
- 13.5 Foot $699.99
- 16.5 Foot $1124.99
Screed Blade Pricing (Discounted Local Pick Up Price)
- 6.5 Foot $299.99
- 8.5 Foot $399.99
- 10.0 Foot $499.99
- 11.5 Foot $599.99
- 13.5 Foot $699.99
- 16.5 Foot $799.99
Specs:
- Model: Available in Either WPSC2 or WPSH2 (Honda Engine)
- Engine: GX19 or Honda GX35 (Both Engines are 4 Stroke)
- Horsepower: GX19 2.41 hp or Honda GX35 1.6 hp
- Frequency: 3600 rpm
- Vibrations Per Minute: 8000 vpm
- Blade Material: Strong Rust Resistent T6061 aluminum
- Body Material: Stainless Steel
- Fuel Tank Capacity: 0.65L
- Weight: 29.7 lbs
- Driving system: flexible shaft
Prices Include Free Shipping Nation Wide. (Only Available At HOC)
House of Contractors
1(844)440-4014
www.hocanada.com
-
7
Saw has 20" bar.new chain.not on bar.chain gaurd.runs like new.call for photos
-
8
Runs idols but won’t rev only runs on choke but good parts saw
-
9
never been put on a saw
-
10
Belt drive flywheel included
Great shape was mostly just a back up pump. Stored with caps and plugs
On fluid end, power end looks like new
-
11
Great working DEWALT 20v drill, just don’t need as I bought a hammer drill. This is a bare tool so no battery included.
-
12
Have 1/4” Hex impact drill, angle grinder and a circular skill saw come with 1 battery and charger $125 takes them all.
-
13
For sale is a good condition Universal Laser Systems VLS6.75 Laser Engraving Machine. 75W CO2 tube, purchased brand new February 2022.
Includes:
Laser system and 75W tube manufactured Feb 22
2.0 lens installed and 1.5 lens brand new unopened
Honeycomb
Rotary
Box with original manuals, tools, cleaning supplies, test samples
Exhaust system
-
14
Woodmizer LT40HD WIDE sawmill- 2021 With Only 24 Hours, Debarker, Extra Blades!
Here you have an almost new 2021 Woodmizer LT40HD WIDE head portable sawmill with only 24 hours on it. It has the the 26.5 HP engine, Debarker, and 24 blades!! I waited 6 months to get this mill and in the time that I waited for it I relocated out of town and no longer need it. I ran some logs through it for my neighbor and it’s amazing. Cuts fast and accurate and is everything I hoped for. Current order time for this mill from Woodmizer is well over a year so don’t wait and get this one now!
This mill can cut logs up to 21’ long, 36” in diameter and is capable of a 34” wide cut which is perfect for slabs. It has a hydraulic log loader, hydraulic log turner, hydraulic log clamp, hydraulic toe boards for leveling cuts and sliding logs forward along with hydraulic log supports. This mill has the 26.5 HP gas motor which has plenty of power for huge logs. This mill also features electric blade guide adjustment, automatic water and automatic clutch.
-
15
2021 Southern Pride 500 smoker used on trailer. This unit was used for 1 year. It is in immaculate condition and ready for its new home. 90 day warranty included. A smoke extractor can be added to this unit. It can also be converted to natural gas.
-
16
Miller Big Blue 400 Pro Portable Welder Kubota Diesel New.
Engine-Driven Welder
Color Blue
For Material Type Stainless Steel, Steel
Generator Fuel Type Diesel
MIG Welding Maximum Output Current 400 A
MIG Welding Output @ Duty Cycle
300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
Phase Three-Phase
Polaraity DC
Start Type Electric
Stick Welding Maximum Output Current 400 A
Stick Welding Minimum Output Current 20 A
Stick Welding Output @ Duty Cycle 300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
TIG Welding Maximum Output Current 400 A
TIG Welding Minimum Output Current 20 A
TIG Welding Output @ Duty Cycle
300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
Remote Connection Type 14-Pin (Miller)
Welding Mode CC
Welding Processes
Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored Welding (FCAW), MIG Welding (GMAW), Stick Welding (SMAW), TIG Welding (GTAW)
Application
Construction, Fabrication, Infrastructure, Maintenance and Repair
Circuit Breaker Yes
Continuous Auxiliary Power 10,000 W
Coolant Tank Capacity 6 qt
Engine Brand Kubota
Engine Model Kubota V1505
Fuel Tank Capacity 11.5 gal
Generator Outlets
20 A 120V GFCI 5-20R (4), 50 A 120/240V 14-50R
Horsepower 20 hp
Model 907732
Oil Capacity 6 qt
Open Circuit Voltage 85 V DC
Overall Depth 56 in
Overall Height 32 in
Overall Width 26.25 in
Peak Auxiliary Power 12,000 W
Series Big Blue 400 Pro
Sound Level 68.7 dB @ 23 ft, 71.6 dB @ 23 ft (Weld)
Standards
CSA Certified
Weight 950 lb
Enhanced Process Pulsed MIG (GMAW-P), RMD
-
17
Epilog Fusion Edge Laser Engraver/ Cutter 60 Watt. 24" x 24" work area (110V).
Manufactured in 2021 Like New everything works great and can be tested.
Includes rotary attachment, air pump, 2 & 4 lens.
-
18
2020 brs line bore setup
C45 boring kit with two 1.75” and one .875” bars.
Small bar kit
Snap ring grove tool
Automatic facing tool
4 bearing mounts
Drill chuck for the end of the bar
Bore measure tool
Digital tool bit adjuster
Lots of miscellaneous carbide and HSS tooling
Some custom tools and miscellaneous things
408i bore welder
Miller 215 welder
This is a great opportunity for someone to get into line boring. Everything works perfectly. You could literally buy this and go straight to a job and have everything you need except calipers.
-
19
Concrete Hammer CH Tools
110V Electric
Good Working Condition
Made in the USA
$275 cash and carry
only serious buyers only - call only no text 905.332.1051
-
20
Brand new in the box. I only opened for pictures. I won this saw and unfortunately I don’t need it. Someone is going to get a great deal.
- Increased power with brushless DC motor
- Increased jobsite durability due to lubricating mechanism and reinforced gear shaft
- Brushless DC motor generates less heat buildup and is ideal for use in prolonged manufacturing / production applications
- eXtreme Protection Technology (XPT) offers maximum protection against dust, dirt and debris for optimal performance in extreme conditions
- Toolless shoe adjustment enables fast and easy adjustment on the jobsite
- 2 speed settings provides ideal settings for wood or metal cutting applications
- Electric brake stops blade immediately after trigger is released for increased operator safety
- Blade ejection lever located on side of tool housing for operator convenience
- Vertical crank mechanism minimizes blade deflection and reduces vibration
- Lighter weight versus 18VX2 models for increased maneuverability and operator comfort
- Retractable sky hook allows tool be hung on rafters, pipes or scaffolding
- Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact
- Twin LED job lights with pre-glow and after-glow features illuminates work area
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation
-
21
Comes as shown in the picture
-
22
20v nailer brand new
Roofing
Prices firm
720 plus tax brand new
-
23
Selling a Milwaukee 6519 Sawzall Reciprocating Saw 12 Amp with case. Works great no issues.
-
24
RIGID RP340 Press Tool for plumbing. Retail new for 5000, used but still great condition, case, manual, both batteries work and hold charge. Asking 2000 or best offer!
-
25
Chinese patent protected products. Four-wheel drive (two-wheel work and two-wheel walk), saving effort. Increase the handle gear, simple operation, high safety performance, not easy to hurt people, elderly and women can use. .
2. differential steering, flexible turning
3.Equipped with front and rear working wheel intershift (our patent),which improves the working ability of various scenarios
4.Wide use and free (cutting) tools. Rotary knife, ditching knife , weeding knife and earth knife etc.
5. arm-rest frame shifting operation to improve the convenience
Modle:LS-5100B
1)Engine:170F/177F Gasoline engine /173/186/188diesel engine
(Hand start tractor/electric start )
2)Engine Power: 7hp /9hp/10hp
Type of cooling :air cooling
3)Transmission: blet transmission +Moulded Stell Gear-box
4)Working parameter :(width adjustable)
Rotary tillage width:400-800mm
Rotary tillage depth:0-200mm
Diching width:180-400mm
Diching depth:0-400mm
Weeding width:700mm
5)Poductivity: 0.1(ha/h)
Fuel consumption:12.0-20.0kg/hm²
6)Gross weight:125kg
Net weight:135kg
7)Machine size:1700*550*830mm
8)Free accessories:
1.3goup *3pcs blade
2.4pcs Ditch the blade: 1set
3.Iron wheel for diching blade :1set
4.weeder wheel :1set
5.rubber tire:1set
-
26
1)Engine:188F diesel engine
2)Engine Power: 10hp
3)Transmission: blet transmission +Moulded Stell Gear-box
（differential lock：could this machine tyre rotates together in same direction or it can change the direction while turning the position）
4)Rotary tillage width:500-800mm
Rotary tillage depth:0-200mm
Diching width:180-400mm
Diching depth:0-300mm
Weeding width:700mm
5)Poductivity: 0.1（ha/h）
Fuel consumption:12.0-20.0kg/hm²
6)Gross weight:200kg
Net weight:250kg
7)Boundary dimension:1940*860*1050mm
Unit set pakage size:1300*800*1250mm
8)Support engine: 188F air cooling Diesel engine /180Water-cooled diesel engine
-
27
Great quality tool
works great
no issues at all
used a few times
Serious buyers only!!
text me at
6046905218
-
28
BRAND NEW IN BOX!!!
Serious buyers only!!!
text me at
604 690 5218
-
29
BRAND NEW IN BOX!!
Serious buyers only!!!
text me at
604 690 5218
-
30
Great quality tool
no issues at all
works great.
serious buyers only!!
please text me at
604 690 5218
-
31
This is a DeWALT 30 amp battery charger with 80 amp engine starter.
Includes a second bank for charging batteries, alternator tester, battery reconditioning and reverse polarity protection, USB port and 6 amp 120VAC power plug on the front.
Has battery charger cables built-in. See pics! Don't miss out on this great deal!
SHIPS CANADA-WIDE
-
32
great quality.
used a few times but works great and no issues
serious buyers only.
we are moving and need space.
thanks
-
33
brand new in box
-
34
sear craftsman brand is running good
-
35
Drilling Mud Pump For Sale: Are you looking for Drilling Mud Pumps?
Contact Instruments is your one stop solution for Oilfield Instrumentation that are not just highly durable but also accurate and reliable. Our Mud Pressure Gauges are engineered to perfection to ensure that you get the most out of your drilling operations.
To view our broad range of Mud Pressure Gauges visit us at:
https://www.contactinstruments.com/mdse/mud-pressure-gauges.html