Cars & vehicles, Heavy equipment with in Canada, British Columbia, Vancouver, Delta/Surrey/Langley.
-
1
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 45-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT 1.3 MILLION PC450LC-8 TO TO REPLACE LARGE CRANES TO DRIVE 40-50-60 SHEET PILES IN TIGHT LOCATIONS
THIS MACHINE CAN DRIVE 40-50-60 FOOT SHEETS PILE REPLACES LARGE CRANE MOUNTED UNITS WITH POWERPAK HYDRAULIC UNITS AND REDUCES YOUR CREW FROM A 4 OR 5 MAN CREW TO 2 AND WILL DRIVE 4 TIMES AS MANY SHEETS PER HOUR PLUS READY TO DRIVE PILES 1/2 HOUR AFTER ARRIVING ON-SITE NOT A DAY LIKE CRANES AND WILL WORK IN TIGHT LOCATION AND SWAMP GROUND JUST USING WOOD PADS IF REQUIRED
MACHINE THEN CAN BE USED ON THE JOB FOR ALL EXCAVATOR WORK REQUIRED - THEN REMOVE THE SHEET PILES WHEN THE EXCAVATION IS DONE - NO SECOND MACHINE REQUIRED - THIS MACHINE WAS PUT TOGETHER FOR A LARGE JOB IN SWAMPY GROUND FOR BUILDING A BRIDGE WHERE THERE WERE 40 FOUNDATIONS THAT WERE 30 FEET WIDE X 50 LONG THAT AFTER DRVING THE SHEETS NEEDED TO BE EXCAVATED TO A DEPTH OF 20 FEET - BUT DUE TO COVID THAT JOB WAS PUT AND REMAINS ON HOLD.
THIS IS NOT A SPAGETTI BOOM LONG REACH - USE LARGE 12000 ft lb HYDRAULIC HAMMERS - 10,000 LB HYDRAULIC DEMOLITION PROCESSORS - GRAPPLES - HYDRAULIC DUAL DRUM GRINDERS - PLATE COMPACTORS - DIG WITH VARIOUS BUCKETS UP TO 4 YARDS ALL WITH ONE MACHINE
OR TAKE THIS SHEET PILE UNIT FOR $125,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
OR FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS VERSATILE MACHINE READY TO WORK NOW WITH THIS SHEET PILE HEAD
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
NOTE: The Appraisal Shown in Image 6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the cost of Importing the HydraRam Sheet Pile Driver from Europe or the $200,000.00 plus spent to complete the machine to its current finished state.
-
2
THIS BRAND NEW NEVER INSTALLED BUCKET DOES IT ALL WITHOUT CHANGING BUCKETS - MAKES A THUMB OBSOLETE AND WORKS THRU THE ENTIRE BUCKET ROTATION -SEE YOUTUBE VIDEOS:
https://youtube.com/watch?v=VYxdToqeleI
https://youtu.be/BV5EeyGm5OM
APPLICATIONS :
FORESTRY • PIPELINE • ROAD BUILDING • RIPRAP • MINING • DEMOLITION • MARINE/DREDGING
WASTE MANAGEMENT • SOIL REMEDIATION • SCREENING • TRUCK LOADING FOR ALL MATERIALSEXCAVATOR CLASSES FOR THIS 60 INCH XHAND WILL FIT ALL 200 / 250 / 300 - CURRENTLY SETUP WITH WBM LUGGING FOR 200-240 CLASS MACHINES
TAKE THIS $60,000.00 PLUS BUCKET FOR $30,000.00 AND HAVE WORKING NOW - NOT WAIT 4 MONTHS TO HAVE ONE BUILT
WE SHIP QUICKLY AND GET GREAT RATES
FRANK 604-476-7777 OR TOLL FREE 1- (833) 693-9323
ONLY REQUIRES 1 HAMMER OR HOEPACK HYDRAULIC CIRCUIT AND JOY STICK ELECTRIC CONTROL TO RUN AS CONTROLLEDS BY DAN FOSS VALVES.
DIGGING: Digging and clean-up capabilities in ONE attachment - SEE VIDEO
https://youtu.be/dkm0dxBI5BU
ROAD BUILDING -
https://youtu.be/DSooBNHheLs
DOZING Moving material forward and back, with double edge grading functionality - SEE VIDEO
https://youtu.be/5-girnvgBr0
SHOVEL LOADING Forward loading from the ground up for increased efficiency - SEE VIDEO
https://youtu.be/hifN_8J5n5M
GRABBING Full-width double-sided grabbing for maximum productivity - SEE VIDEO
https://youtu.be/95FmPIOywA4
SCREENING Filtering debris using both screening surfaces, saving time and money
https://youtu.be/a3-0p5oB5ko
PILING BRUSH - MOVING LOGS -
https://youtu.be/zQbNwrE5Y3c
EXCAVATOR CLASSES FOR THIS 60 INCH XHAND 200 / 250 / 300
SCREEN SIZE OPTIONS - 3″
After attending the Canada North Resources Expo held in Prince George on May 26th and 27th, 2017; XHand Inc. was featured as a noteworthy exhibitor at the event.
A highlight video was produced, speaking with XHand Inc. President, Dean Perrey.
Logging and Sawmilling JournalMay 2017 – Prince George
Also following the attendance at the Canada North Resources Expo, XHand Inc was featured by an article written and published in the Logging and Sawmilling Journal.
-
3
367
2023 peterbilt 367 Extended Cab with comercial highlift steel box. Plumbed for qurd and pup 84,000km 1900 hours. Truck is working everyday and will change. Cummins x15 565/2050 eaton 18spd 4.10 gear ratio and 46 diff. Extended warranty engine and after treatment, cooling system 5year/480k with towing packages. Arne Qurd wagon 2007 available also. Unit price $333000
-
4
26ft box
Aluminum tailgate 3500lb capacity
98’ clearance
Hydraulic Brakes
-
5
RARE LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU WORTH $300,000.00 PLUS NEW
IMAGE 3 SHOWS THE PRODUCTION COMPARISON BETWEEN A HR50 WHICH IS A TOY COMPARED TO MY HR82 MINING SERIES AND THE HR50 PRODUCTION IN TWO HOURS COMPARED TO A HYDRAULIC HAMMER VIDEO HERE (just copy and paste) :
https://www.youtube.com/watch?v=1EpaZbRGUag&t=4s
IMAGE 4 SHOWS WHAT SHEARORCE WANTS FOR A WELL USED HR52 - $158,000.00 WHICH AGAIN IS A TOY COMPARED TO THIS HR82 WHICH WEIGHS MORE THAN TWICE WHAT THE HR52 DOES
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS AND HOLES WHERE YOUR CRAWLERS CAN NOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - PUT IN SERVICE IN FALL 2019 - LITTLE USED DUE TO COVID
Note: The paint was touched up but those are the original factory decals on the ripper and the ripper had a re-enforcing plate welded into a known weak spot on both sides of the main ripper shank as preventative maintenance (never cracked as new shank).
The unit is ready to work - needs nothing.
CLEAR TITLE READY TO WORK NOW
SEE IMAGE 4 AND 5 FOR WHAT SHEARFORCE WANTS FOR A COUPLE OF USED HR42s AND HR 52'S - $158,000.00 ? - BOTH OF WHICH ARE WELL USED TOYS COMPARED TO THIS RIPPER
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK HAS 120 MM MAIN PIN AND 110 MM SECONDARY ON WITH 22.25 INCHES BETWEEN THE EARS)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication is required
• Minimum wear parts consumption
• Long-life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable, and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduce the
strain on the excavator's arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high-volume excavation and demolition.
After more than 10 years of development in the design and manufacture of the world's most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all-new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw a video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clamshell bucket for dredging on the other,” he said. “We needed a tool that would work well underwater and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs, and reduced noise levels, the all-new XR Mining Series is a revolution for high-volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
NEW COST OVER $300,000.00 TAKE IT FOR $100,000.00 AND WE WILL SHIP QUICKLY = HAVE ON THE JOB NEXT WEEK
THIS UNIT WILL FIT THE FOLLOWING MACHINES WITH A HYDRAULIC PIN GRABBER COUPLER:
Case CX800
Caterpillar 365B L w/ VB Link
Caterpillar 365C w/ Reach Linkage
Caterpillar 375
Caterpillar 375 w/ Mass Linkage
Caterpillar 375 w/ Reach Linkage
Caterpillar 375CL
Caterpillar 385B
Caterpillar 385B
Caterpillar 385B LHitachi Zaxis 650LC-3 BE Arm
Hitachi Zaxis 650LC-3 H Arm
Hitachi Zaxis 670LCH-3 BE Arm
Hitachi Zaxis 670LCH-3 H Arm
Hitachi Zaxis 800 & BE
Hitachi Zaxis 850-3 BE Arm
Hitachi Zaxis 850-3 H Arm
Hitachi Zaxis 850LC-3
Hitachi Zaxis 850-LC-3 BE Arm
Hitachi Zaxis 850-LC-3 H Arm
Hitachi Zaxis 870H-3 BE Arm
Hitachi Zaxis 870H-3 H Arm
Hitachi Zaxis 870LCH-3 BE Arm
Hitachi Zaxis 870LCH-3 H Arm
Hitachi Zaxis 870LCR-3 BE Arm
Hitachi Zaxis 870LCR-3 H Arm
Hitachi Zaxis 870R-3 BE Arm
Hitachi Zaxis 870R-3 H ArmJohn Deere 600CLC & ME
John Deere 650DLC
John Deere 710G Std or Ext Stick
John Deere 710J Std or Ext Stick
John Deere 800 C & ME
John Deere 850D LCKobelco SK850LC
KOMATSU
PC600
PC600LC-6
PC600LC-7
PC600LC-8
PC600LC-8
PC650SE-3
PC650-6
PC750-6
PC750-6
PC750SE-6
PC800LC-7Link-Belt 800 QUANTUM
Link-Belt 8000 QUANTUM
Link-Belt 8000 QUANTUM MASSVolvo EC700B
Volvo EC700C
VOLVO EC800
-
6
COMPLETE SET OF MINT AS NEW LOW HOUR USEAGE ALL COMPLETE WITH AS NEW TEETH HENSLEY ADCO EXTREME DUTY AR 400 STEEL BUCKETS WORTH OVER $50,000.00 USD OR 68,000.00 CDN FROM OUR PC450LC-8 WHICH HAS LESS THAN 7300 HOURS ON IT AND WAS USED MAINLY FOR GRAPPLES AND DEMOLITION PROCESSORS
ALSO A NEW GEITH HYDRAULIC PIN GRABBER COUPLER C/W NEW PINS FITS KOMATSU PC400-PC490 DOOSAN 340 - DAEWOO DX 340 - CATERPILLAR 330D L w/ DB Link
IT HAS 100 MM PINS WITH 16.25 INCHES BETWEEN THE EARS CAN BE MODIFIED OR YOU COULD BUSH DOWN TO 90 MM PINS AND FIT MOST 300 - 350 CLASS EXCAVATORS
GEITH IS THE CADILLAC OF COUPLERS AND THE ONLY ONE WE USE
WE BOUGHT TO PUT ON OUR PC450LC-8 KOMATSU BUT IT ALREADY HAS A PERFECT COUPLER
IT WAS BUILT BY GEITH AND TAGGED FOR DOOSAN 340 BUT TAG EASILY REMOVED
THESE NEW ARE NOW $18,000.00 AND 16 WEEKS OUT
TAKE THIS NEW ONE FOR $10000.00 C/W THE NEW PINS - IT IS OUR NB YARD BUT EASILY SHIPPED FOR NO COST TO YOU IF YOU TAKE THE
SET OF BUCKETS.THIS SET OF HIGH QUALITY STEEL USA BUILT QUALITY BUCKETS CONSIST OF:
1) CLEANUP - BULK LOADING TOUGH MATERIAL SUCH AS CONCRETE - ROCK LIMESTONE - SHALE - SANDSTONE - COAL BUCKET
70 INCHES WIDE BUT DEEP FOR LOADING TRUCKS OVER THE REAR WITH NO SPILLAGE
THIS IS A RARE TOOTHED 4 YARD HEAPED - DEEP CLEANUP - BULK MATERIAL BUCKET WE USED FOR LOADING OUT BULK ROCK AND CONCRETE - 3 BUCKETS TRUCK IS GONE
AND RIPPING SHALE AND LIMESTONE ON OUR PC 450-LC-8 KOMATSU EXCAVATOR
BUCKET IS IN EXCELLENT CONDITION WITH MULTIPLE TEETH FOR RIPPING AND LOADING THAT ARE SPACED SIDE BY SIDE FOR STRENGTH AND CUTTING - LEAVES SMOOTH EXCAVATION BUT DIGS THROUGH CRUSHED CONCRETE AND ROCK WITH EASE
THIS BUCKET COST OVER $20,000.00 USD
TAKE THIS ONE FOR $10,000.00
2) 46 EXTREME DUTY DIGGING BUCKET C/W NEW KOMATUS TEETH - SIDE CUTTERS HOURS OF HARD SURFACING WELDING DONE READY TO WORK TAKE THIS ONE FOR $10,000.00
3) 30 INCH EXTREME DUTY V RIPPER BUCKET C/W ALL NEW TIGER TEETH INSTALLED - BUCKET AS NEW READY TO WORK. TAKE THIS ONE FOR $8000.00
TAKE THE COMPLET SET OF RARE EXTREME DUTY BUCKETS FOR $25,000.00
OR TAKE ALL BUCKETS AND THE GEITH COUPLER FOR $35,000.00 ALL SHIPPED TO YOU - READY TO INSTALL AND WORK NOW NOT WAIT 4 - 6 MONTHS OR NEED SHIPPING FROM US WITH CUSTOMS ETC
WILL SHIP QUICKLY AND WE GET GREAT RATES FROM OUR YARD LANGLEY BC OR IF YOU TAKE ALL - WE WILL PAY THE TRUCKING !!
Whether the task at hand involves general excavation or severe digging, regardless of the material, Hensley Attachments has the right excavator bucket for your application. The world famous, and often imitated, V-Rock bucket originated in this Mansfield, Texas shop. Hensley Attachments also makes a series of traditional excavator buckets equipped with built-in reinforcements that reduce downtime. The General Purpose, Heavy Duty, Severe Duty, and Extreme Service Duty excavator buckets also come with a cast lifting eye, and optional sidecutters.
STANDARD FEATURES ON ALL THESE BUCKETS HAVE:
* Dual taper / dual radius design
* One piece blade (T-1)
* Upper and lower side kick plate (400 BHN)
* Full bottom wear plate (400 BHN)
* Horizontal wear strips (400 BHN)
* One piece side plate
* Strike-off assemblies
* Lip (T-1)
* Formed beam upper structure
* Increased material thicknesses in high wear areas
* Cast heel wear shrouds
* Optional Bimetallic wear resistant productsRECOMMENDED APPLICATIONS:
* Granite
* Ore
* Limestone - Shale -
* Broken Slag
-
7
- 435 hours
- Tractor comes with a loader only. (backhoe & forks are not included.)
-
8
Selling KUBOTA M7060HDCC12 CAB TRACTOR
***Very low hours just 390 total***
Condition: Like new- 70HP KUBOTA DIESEL ENGINE
- 4WD
- CAB WITH HEAT &A/C
- BLUETOOTH RADIO
- 12X12 TRANSMISSION WITH SHUTTLE SHIFT
- TWO REAR REMOTE HYDRAULICS
- 11.2-20 AG TIRES
- 14.9-28 AG TIRES
- Engine replaced at 214 hours by Kubota just because of fuel vandalism.
-Clean titleAlso Includes:
- KUBOTA M26-1 SELF-LEVELLING LOADER
- BE HD4442A0600 PALLET FORKS
-
9
1979 Case 580 2wd Full Size Backhoe Loader
- Diesel 4 cylinder
- New injectors
- Fully enclosed cab
- Front end wheel loader bucket
- Rear digging backhoe excavator bucket
- Good tires
- local in Surrey BCPlease text Jason at 7788092510 to inquire
-
10
Kms
963,000.00 Kms
- 11
-
12
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 50-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT PC450LC-8 TO DRIVE 40-50-60 SHEET PILES
TAKE THIS UNIT FOR $150,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
https://youtu.be/rxRSwrcUMDU
-
13
6100 Hours, A/C Cab, Blade, Auxiliary hydraulics, Wedge quick coupler with 16", 24", 48" buckets, undercarriage changed at 4700 hours. Rubber pads. Nice shape.
-
14
ORIGINAL VEHICLE PRICE: $61,926.00, DISCOUNTED MANAGER'S SPECIAL PRICE: $59,495.00Finance and extended warranty options available with approved credit. DOT compliant and thoroughly inspected. Year:2018,Make:FRTL,Model:CASCADIA 125,Engine Type:IN LINE,Trans Type:Manual,Color:White,Hrs Power:500,Miles:851765 Ryder Road Ready Stock#:685453 Perfect for tandem axle long haul over the road sleeper (Condo or single) tractor applications, (mail haulers, package companies, freight companies, movers, trucking companies, ). Vehicle Information Provided by autoTRADER.ca
-
15
SUNWARD SWE 35UF Mini Excavator----
-------------SWE 35UF Introduction-------------
The Sunward SWE35UF compact excavator with zero-tail can handle bigger projects than its smaller companions, while also maintaining good performance, maneuverability, and speed on the job. The OROP / EROP cab is outfitted with A/C and heat, so this machine can keep going no matter the working conditions.
Below Table is Quick Overview (Key Specification)
Quick Overview
Machine Weight: 8269 - 8489 lbs // 3750 ‒ 3850 kg
Bucket Capacity: 0.14 yd³ // 0.11 m³
Bucket Width (std): 1'8.5" // 520 mm
Engine Model: KUBOTA, D1703-E4B-SWD-1
Rated power: 24.4/2200 HP/rpm // 18.2/2200 kW/rpm
Traveling speed (High/Low): 2.6/1.4 mph // 4.2/2.3 km/h
Max digging reach: 17'8" // 5390 mm
Max digging depth: 10’3" // 3120 mm
Hydraulic pump type: 1 variable piston pump
Flow rate: 23.2 gal/min // 88 L/min
Fuel Tank Capacity: 10.6 gal // 40 L
-
16
1998 K-Line Transfer Trailer
- Good Condition
- 4 Axle
- Leaf Spring Suspension
- Aluminum Box
- All tires in good
- Narrow Rail (32'')Price is negotiable.
-
17
Tilt deck tri axle
Current inspection and on the road.
Cabover truck available as well
-
18
DD13 Engine
Automatic 6spd Allison transmission
Electric brake control
CB radio
Ability to travel with 3 persons.
Truck set up to haul trailers.Text Lee for further details.
778-840-4665
-
19
SUNWARD SWE 18UF Mini Excavator-----
-------------SWE 18UF Introduction-------------
The Sunward SWE18UF is a 4-pole canopy mini excavator built for small corners and tight working conditions. With the zero-tail chassis and the expandable undercarriage (from 39″ to 52″), you can get into the smallest spaces, allowing for precise movement, even when the space is restricted. And in case you need extra support, you can simply widen the undercarriage.
Below Table is Quick Overview (Key Specification)
Quick Overview
Machine Weight: 4145 lbs // 1880 kg
Bucket Capacity: 0.052 yd³ // 0.04 m³
Bucket Width (std): 15 in // 380 mm
Engine Model: YANMAR, 3TNV80F-SSSU
Rated power: 13.4 /2200 kW/rpm // 18 /2200 hp/rpm
Max torque: 49.5/1600 lbf.ft/rpm // 67.4/1600 N*m/rpm
Traveling speed (High/Low): 2.7/1.4 mph // 4.4/2.3 km/h
Max digging reach: 13ft 5in // 4120 mm
Max digging depth: 7ft 10in // 2410 mm
Max vertical digging depth: 5ft 5in // 1675 mm
Hydraulic pump type: 2 variable psiton pumps + 2 gear pump
Max. flow of hydraulic pump: 2x5.5 + 4 gal/min // 2*21 + 13.2 L/min
Fuel Tank Capacity: 6.5 gal // 24.6 L
-
20
We are looking to sell 8 53' Tandem Dryvan trailers.
UTILITY 2006
UTILITY 2006
UTILITY 2007
UTILITY 2007
UTILITY 2011
UTILITY 2011
UTILITY 2012
UTILITY 2012
-
21
Preparing for spring? Having a hard time finding something new that is available now?
This unit is ready to work now! Clean and low mileage this 2016 Hino 195 Crew Cab is perfect to fill that void in your fleet. Comes equipped with a dump body from DEL Equipment, navigation and can seat 7 people.
Come down to Hino Central at 20020 96 Ave to take it for a drive.. Vehicle Information Provided by autoTRADER.ca
-
22
2007 53' Lode King Tandem Axle Flatbed
-
23
Sterling Leaf Springs
Front and Rear Springs
Sterling 360
Acterra Leaf Springs
5500 Leaf Springs
6500 Leaf Springs
7500 Leaf Springs
8500 Leaf Springs
MT500 Leaf Springs
A95 Leaf Springs
AT95 Leaf Springs
L75 Leaf Springs
LT75 Leaf Springs
L85 Leaf Springs
L95 Leaf Springs
ST95 Leaf Springs
Sliverstar Leaf Springs
6500 Leaf Springs
7500 Leaf Springs
Bullet Leaf Springs
Bullet 5500 Leaf Springs
Condor Leaf Springs
L Line Leaf Springs
LT7501 Leaf Springs
L9500 Leaf SpringsCall or Email us for a quote
Sales@Dendoff.com
DENDOFF SPRINGS
12045 Old Yale Road, Surrey. B.C.
604-580-3400
-
24
We have limited availability coming in of a our new Hino S5 Crew Cabs! Call 604-881-1738 to find out more.. Vehicle Information Provided by autoTRADER.ca
-
25
Stock #: 434156
Tandem Axle Day Cab Tractor, International A26 engine (475) HP, Eaton Fuller Ultra Shift transmission (13 speed), Air brakes, 39873km, 13200 lbs front axle capacity, 40000 lbs rear axle capacity, Diff Lock rear lockup, A/C, Comments: Available January 2024
See this unit at Maxim Truck & Trailer
-
26
Located: 9616-188th St Surrey, BC
ISX 550HP – 46,000 DIFFS – LOW KM’S – HD SPEC
Conventional Tractor, Cummins ISX – 550HP (79776551), 1850 Torque, Engine Brake, RTLO-18918B - 18 Speed Manual Transmission, 13,200 lb Front, D46-170P - 46,000 lb Diffs, Ratio: 3.91, KW Air Ride (8 Bag) Susp, 40" Integral Sleeper, Dual Upright Exhaust, Dual Diff Lockers, Holland Air Slide 5th Wheel, 11R24.5 Tires (aprox 48% tread), 10 x Alum Disc Wheels, 2 x 135 US Gal Fuel Tanks, Nav Plus System Audio, CB Radio, 2 x Ear of Sleeper Rotary/Strobe Lamps, Air Conditioning, 2 x Frame Mount Tire Chain Hangers, Twin Cabinet Alum Cab Guard, Webasto Engine Heater, Alum Front Bumper, Factory Mount HD Tow Hook, Hydraulic Oil Cooler (Mounted on Cab Guard), S/S Spring Loaded Rear Flap Hangers, Emergency Engine Shut Off Valve.CAB TO C/L TRUN 107" / CAB TO END OF FRAME 165" / WHEEL BASE 224” / AXLE SPREAD 54”
Current Odometer Eng KM's 809,668 - Current Odometer Eng Miles 503,104 – ECM Eng Miles 503,105 – ECM Engine Hours 17,862
MVI – (ALBERTA)
-
27
50% DP Match Promo Max (Up To 10,000)* Or 6 Months No Payment* Or 6 Months Free PRIDE Extended Warranty* In-house Special financing offer by TPine for Work Permit Holders and First-Time Buyers (No matter where you are buying-Private, Fleet, Any Dealer or Re-financing)*. Contact us for Special Fleet Rates. No matter Dollar Amount of the deal, We GUARANTEE rate beat*. NO Financial Covenants pains. For 100% Guaranteed Approval Call Now @ our 24/7 helpline 1.8.6.6.7.7.4.3.3.2.4 (1-866-PRIDE-24). 7 Days-a-week Same Day Approval. EXTENDED WARRANTY Available up to 1,000,000 kms*. All our trucks are DOT Ready with Fresh Oil Changes. We pay top dollar for your equipment either Trade or Sale. PRIDE is your cross border one-stop-shop for all your trucking and financing needs serving you in Multiple Languages across North America. With 41+ locations across North America & GROWING, we are the LARGEST USED TRUCK DEALER, CHOOSE FROM 1000s of in stock units. Pride Truck Sales carries a diverse late model premium inventory including Sleepers, Day cabs, Reefers, Dry vans, and heated units of all makes and models such as Freightliner, Volvo, Mack, Kenworth, Peterbilt, International, Thermo-King, Great Dane, Manac, Utility and many more. Please ask our sales team about following In-House products and services: PRIDE Extended warranty plans for New and Used trucks . PRIDE 24/7 In-House Road-Side Service and Assistance Helpline .In-stock Parts Delivery across North America for all Makes & Models. PRIDE Fuel Card Program. PRIDE Factoring/ABL Product. PRIDE Contract Fleet maintenance plan . PRIDE Short Term Rental, TRAC Lease, All in cost Full Maintenance Lease plans starting from 25 cents, New Truck Replacement Every 1-2 Years (Disclaimer: Although Our Online marketing team has made Substantial effort to provide accurate and complete information on this Web site, please contact one of our Qualified professional sales team members to verify availability / Pricing / Specifications of the information online. *Conditions Apply.). Vehicle Information Provided by autoTRADER.ca
-
28
Hours: 8065 | Location: Surrey, BC, CA | Arms: Long Arm; Booms: Standard Boom; Buckets: w Bucket; Operators Station: Cab w AC; Pad Size: 32 Pads; Tracks: Wide Pads; Tracks: Wide Track; in.
Need Flexible Financing? Low Rate Options are available from Brandt Finance. To apply now, call 1-855-711-4545 or visit www.brandtfinance.com.
Brandt delivers Canada's #1 used equipment inventory for all the industries we serve, backed by the best-trained, most committed after-sales support team in the business.
For complete listing details and to view our full inventory, visit www.brandt.ca/Products/Used-Equipment
Did you know that Brandt BUYS used equipment as well? If you have heavy equipment you are looking to sell or consign, email sales@brandt.ca and we will connect you with a rep in your area!
-
29
NEW 2023 Felling Tag trailers in stock now
37' Tridem with beaver tails
Spring ride
Pintle hitch
60,000lb capacity
-
30
100% DOWN PAYMENT MATCH, 6 MONTHS-NO PAYMENT* In-house Special financing offer by TPine for Work Permit Holders and First-Time Buyers (No matter where you buying Private, Fleet, Any Dealer or Re-financing)*. Contact us for Special Fleet Rates. No matter Dollar Amount of the deal, We GUARANTEE rate beat*. NO Financial Covenants pains. For 100% Guaranteed Approval Call Now @ our 24/7 helpline 1.8.6.6.7.4.3.3.2.4 (1-866-PRIDE-24). 7 Days-a-week Same Day Approval. EXTENDED WARRANTY Available up to 1,000,000 Kms*. All our trucks are DOT Ready with Fresh Oil Changes. We pay top dollar for your equipment either Trade or Sale. PRIDE is your cross border one-stop-shop for all your trucking and financing needs serving you in Multiple Languages across North America. With 37+ locations across North America & GROWING, we are the LARGEST USED TRUCK DEALER, CHOOSE FROM 1000s of in stock units. Pride Truck Sales carries a diverse late model premium inventory including Sleepers, Day cabs, Reefers, Dry vans, and heated units of all makes and models such as Freightliner, Volvo, Mack, Kenworth, Peterbilt, International, Thermo-King, Great Dane, Manac, Utility and many more. Please ask our sales team about following In-House products and services: o?PRIDE Extended warranty plans for New and Used trucks o?PRIDE 24/7 In-House Road-Side Service and Assistance Helpline o?In-stock Parts Delivery across North America for all Makes & Models o?PRIDE Fuel Card Program o?PRIDE Factoring/ABL Product o?PRIDE Contract Fleet maintenance plan o?PRIDE Short Term Rental, TRAC Lease, All in cost Full Maintenance Lease plans starting from 25 cents, New Truck Replacement Every 1-2 Years (Disclaimer: Although Our Online marketing team has made Substantial effort to provide accurate and complete information on this Web site, please contact one of our Qualified professional sales team members to verify availability / Pricing / Specifications of the information online. *Conditions Apply.)100% DOWN PAYMENT MATCH, 6 MONTHS-NO PAYMENT* In-house Special financing offer by TPine for Work Permit Holders and First-Time Buyers (No matter where you buying Private, Fleet, Any Dealer or Re-financing)*. Contact us for Special Fleet Rates. No matter Dollar Amount of the deal, We GUARANTEE rate beat*. NO Financial Covenants pains. For 100% Guaranteed Approval Call Now @ our 24/7 helpline 1.8.6.6.7.4.3.3.2.4 (1-866-PRIDE-24). 7 Days-a-week Same Day Approval.
EXTENDED WARRANTY Available up to 1,000,000 KMS*. All our trucks are DOT Ready with Fresh Oil Changes. We pay top dollar for your equipment either Trade or Sale.
PRIDE is your cross border one-stop-shop for all your trucking and financing needs serving you in Multiple Languages across North America.
With 37+ locations across North America & GROWING, we are the LARGEST USED TRUCK DEALER, CHOOSE FROM 1000s of in stock units.
Pride Truck Sales carries a diverse late model premium inventory including Sleepers, Day cabs, Reefers, Dry vans, and heated units of all makes and models such as Freightliner, Volvo, Mack, Kenworth, Peterbilt, International, Thermo-King, Great Dane, Manac, Utility and many more.
Please ask our sales team about following In-House products and services:
o?PRIDE Extended warranty plans for New and Used trucks
o?PRIDE 24/7 In-House Road-Side Service and Assistance Helpline
o?In-stock Parts Delivery across North America for all Makes & Models
o?PRIDE Fuel Card Program
o?PRIDE Factoring/ABL Product
o?PRIDE Contract Fleet maintenance plan
o?PRIDE Short Term Rental, TRAC Lease, All in cost Full Maintenance Lease plans starting from 25 cents, New Truck Replacement Every 1-2 Years
(Disclaimer: Although Our Online marketing team has made Substantial effort to provide accurate and complete information on this Web site, please contact one of our Qualified professional sales team members to verify availability / Pricing / Specifications of the information online. *Conditions Apply.)
. Vehicle Information Provided by autoTRADER.ca
-
31
2015 PETERBILT CAR CARRIER W/COTTRELL BUILD UP. NEWLY REBUILT ENGINE WITH 30 MILES ON IT , , NEW BRAKES, PAINT GOOD.
2015 COTTRELL HIGHSIDE TRAILER. SANDBLASTED, NEW PAINT, NEW BRAKES. HAS FLOORS, CURTAINS AND SNOW DOORS.
BOTH HAVE NEW INSPECTIONS. EMPLOYMENT POSSIBLE WITH LARGE AUTO CARRIER COMPANY
-
32
2000 FL80 Ex-Fire truck. Only 4300 km and 3800 hours. Cat 3126 and Allison automatic transmission. Absolutely mint condition. Aluminum wheels and nearly new tires. GVW 32,000 lbs. 210" wheelbase and 98" cab to axle.
-
33
ALSO OKADA CONCRETE CRUNCHER C/W REBAR SCRAP STEEL MAGNET AND OTHER ATTACHMENTS LIKE PLATE COMPACTORS ETC
THE CUT 82 IS A UNIQUE PIECE THAT ONLY REQUIRES THE 2 WAY HYDRAULICS THIS MACHINE HAS AS ROTATION IS DONE INTERNALLY WHEN THE JAWS ARE OPENED FULLY - NO ROTATE CIRCUIT IS REQUIRED.
THE NEW COST ON THIS OKADA CUT 82 STEEL - CONCRETE PROCESSOR IS $100,000.00
NOTE: THE CUT 82 AND OKADA CONCRETE CRUNCHER ONLY NEED TO HAVE BUSHINGS PUT IN TO FIT THE PIN GRABBER SYSTEM - WE WILL SUPPLY THE 90MM PINS
OR TAKE THIS LOW-HOUR AS NEW OKADA CUT 82 FOR $50,000.00 AND OKADA CONCRETE CRUNCHER C/W MAGNET FOR $25,000.00 - SEE MY OTHER AD FOR THIS
AND / OR TAKE THE FOLLOWING ATTACHMENTS AND BUCKETS AT GREAT PRICES
FRANK 604-476-7777
ATTACHMENTS THAT ARE DESIGNATED TO WORK WITH THIS UNIT
1) ALLU PM200 ROTARY DRUM SOILS-SLUDGE-COMPOST MIXING TWIN DRUM
2) Xcentric JGXR30 Hydraulic Ripper Breaker Sandstone - Frost - Hardpan - Shale - Cement
3) IMAC / CWS 360 Degree Rotation Tilting Hydraulic Sheet Pile - Matt Grapple - New Unit Extreme Duty Grapple c/w 72 Inch 12000 lb Forks To Work With Sheet Pile Driver (SOLD)
4) Geith 60 Inch 6 Tooth Digging Bucket For 350 Class Excavator
5) 48" Extreme Duty Digging Bucket 5 New Spade Teeth 350-380 Class Bucket c/w Hard Surfacing American Built Quality AR400 Steel Equipment
6) WBM (Weldo Beales) 60 Inch 70 Hydraulic HP Brush - Small Tree Cutter - Grinder 10 Foot Extension c/w Hydraulic Tilt System
7) Helac PT-12 300-370 Class Excavator Powertilt Quick Coupler 120 Degree Rotation New Condition Mounted New Cat 94 Inch 2 Yd Cleanup Bucket c/w Bolt On Cutting Edge
8) Esco 42 Inch Extreme Duty Trenching Bucket c/w AR400 Cutting Edge For Trench Bottom 330-380 Class Bucket c/w Hard Surfacing American Built Quality AR400 Steel
9) Kenco 48 Inch Concrete Slab Bucket C/W Pin Grabber Custom Mount Extreme Duty Bucket For Pulling - Loading - Placing Concrete Slabs - Bridge Deck - Etc (SOLD)
10) New Hensley Adco 66 Inch Ripping Tooth Cleanup Bucket for 350-450 Class Excavators Extreme Duty 66 Inch Cleanup Bucket c/w 11 Ripper Teeth System For Exteme Digging
11) Helac PT-12 134 Degree Rotation c/w 60 Inch Cleanup - Ditching 250-350 Class Excavator
12) New Hensley Adco 30 Inch Trenching Ripping V Bucket for 350-370 Class Excavators Extreme Duty 30 Inch Digging Bucket c/w Ripper Tooth System For Exteme Digging
13) NPK G-18 Hydraulic Concrete Secondary Pulverizer c/w NPK Power Intensifier(SOLD)
14) New TRK 56 Inch Rock - Sandstone - Frost Ripper Custom Built With Replaceable Tooth Canadian Built AR400 Steel Single Shank HD Ripper
15) New TRK V-Cut Stump Excavator Extractor Custom Built With 48 Inches Between Cutters Canadian Built AR400 Steel Stump Extracor - Root Cutter
16) Simex TF2000 Rotary Rock - Shale - Concrete Drum Cutter 350-500 Class Excavator Mount Simex TF cutter heads are ideal for trenching, profiling and resurfacing rock and cement
17) Simex TF2000 Rotary Large Stump Drum Cutter 200-370 Class Excavator Mount Simex TF Stump 66 Tooth Wood Cutter Heads For Grinding Stumps - Wood Waste Equipment
18) Eskridge Model 77 Helical Pile and Digger Drive For Installing Helical Piles - Digging Pole Holes Double Planetary, Output Torque, 6,500 to 12,000 FT.-LB, Two-Speed, Automatic
19) MP MCcAFFREY 24 INCH TO 72 INCH 2.5 Yard V-Trenching Bucket Quality AR400 Steel American Built V Bucket c/w Pipe Tip For Legal Excavated Trenching
20) FELCO 16000 FT LB BUCKET PLATE COMPACTOR C/W NEW HOSES - SET UP FOR THIS MACHINE
AND MUCH MORE - SEE MY OTHER ADS FOR MORE DETAILS ON THESE UNITS
ONLY SELLING AS DECIDING TO RETIRE AND LEAVE BC DUE TO THE SMOG IN THE VALLEY FOR HEALTH REASONS
FRANK 604-476-7777
-
34
High lift, Hardox box, Alluminum wheels
-
35
Trailer 53 feet 3 axel Manac
For Sale or Rent!
Short or long term.
Storage available.
Financing available $ per month.
Good condition
Ready for work
Manac 2007
Call 778-320-9750 Alex
-
36
2008 hino 3 ton
495km
Ready for work auto matic transmission
Obo
-
37
bobcat s570
got solid tyres on it.
comes with 4 set air tires and bucket.
got a/c and heated cap.
both controled feet and hand.
-
38
Perske Rotary convertor 15/25 kva
-
39
LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS WHERE YOU CRAWLERS CANNOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - CLEAR TITLE READY TO WORK
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication required
• Minimum wear parts consumption
• Long life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduces the
strain on the excavator arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high volume excavation and demolition.
After more than 10 years development in the design and manufacture of the worlds most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from a shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clam shell bucket for dredging on the other,” he said. “We needed a tool that would work well under water and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs and reduced noise levels, the all new XR Mining Series is a revolution for high volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
FRANK 604-476-7777
-
40
Cummins isx
$35 000
For more info call me at
6045374950
-
41
2015 SEM 656D Wheel loader
Machine is in excellent condition. Tires like new. Machine only has 128 original hours
3.5 yard digging bucket.
-
42
OR (15,400-26,400 lb)
TAKE THIS UNIT FOR $10000.00
FRANK 604-476-7777
FROM THE EPIROC WEBSITE:
HYDRAULIC BREAKERS FOR DAY-TO-DAY JOBS
Offering a good price-performance ratio, our EC breakers not only offer the reliability that you expect of an Epiroc breaker, but also many of the well-known features and benefits. Our EC hydraulic hammers are your durable and reliable choice for day-to-day construction, gardening, landscaping and renovation, as well as demolition, trenching, earthwork and quarrying jobs.HYBRID TECHNOLOGY
Integrated nitrogen piston accumulator for constantly high impact energy, safe start-up and smooth operation.VIBROSILENCED PLUS
Non-metallic suspension arrangements to isolate percussion mechanism from breaker box and sealing of all openingsfor lower noise and vibration levels.ADVANCED CONTROL TECHNOLOGY
The integrated control valve optimizes efficiency; the EnergyRecovery system increases operating efficiency and lowers vibrations.MONOBLOCK DESIGN
Combined cylinder & tool holder section eliminating the need for tie rods for higher reliability; replaceable piston liner for cost-effective repairs.PERCUSSION CHAMBER VENTILATION
The built-in check valve reduces dust intake into the tool guiding area and the percussion chamber.STROKECONTROL VALVE
The combined stroke length and start-up mode switching valve enables the operator to adjust the breaker operation mode to the application for optimum performance.CONTILUBE™ II
Optional self-bleeding automatic lubrication device for optimized grease consumption and continuous lubrication.FIELD REPLACEABLE BUSHING
Full length floating tool bushing for quick exchange with standard hand tools.Specifications are subject to change without prior notice.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications
General
Year 2020
Manufacturer EPIROC Model EC80
Condition New
Quantity 1
TECHNICAL DATATechnical specs - EC 80 Epiroc
Weight 370 kg
No. of Blows 530-1000 1/min
Carrying device 5-12 t
Total length 1097 mm
Tool Ø 80 mm
Oil flow 60-90 l/min
Operating pressure 120-150 bar
Impact energy ###
EC 80 Epiroc - Special equipmentCentral lubrication
Silenced
-
43
C/W DEMOLITION GUARDING AND FULL HYDRAULICS
THIS MACHINE WITH ALL GUARDING - HYDRAULICS AND PIN GRABBER COUPLER WOULD COST OVER $450,000.00 TO REPLACE AND WITH THE FOLLOWING HAMMER $600,000.00
TAKE MACHINE ONLY FOR $165,000.00 AND / OR ADD THE FOLLOWING:
ATLAS COPCO HB3100 HYDRAULIC HAMMER
THIS IS A EXCELLENT CONDITION HARD HITTING HAMMER MOUNTED ON THE EC305CL VOLVO EXCAVATOR (88,000 LB) MACHINE
COME TRY IT OUT - WILL POST VIDEO OF IT WORKING SHORTLY OR RENT IT WITH OR WITHOUT OPERATOR
IT COMES COMPLETE WITH AUTO GREASER AND 100 HIGH-QUALITY BIO GREASE EPIROC PLASTIC FACTORY GREASE CARTRIDGES
TAKE IT FOR $50,000.00
OR TAKE THE FULLY SERVICED LOW HOUR VOLVO EC305CL C/W YOUR CHOICE OF DIGGING BUCKET AND THE HAMMER FOR $200,000.00
NOTE: THIS MACHINE WITH THE HAMMER AS PER THE BC ROADBUILDER GUIDE RENTS FOR $350.00 PER HR.
WILL TAKE COLLECTOR - MUSCLE CAR - MOTORHOME AS PART TRADE
LOCATED LANGLEY BC
THE FOLLOWING IS AVAILABLE TO PURCHASE OR RENT WITH THIS MACHINE:
1) LARGE 24000 FT LB CAT PLATE COMPACTOR
2)WRIST TWIST 66 OR 74 INCH WRIST TWIST CLEANUP BUCKET
3)20 INCH TRENCHING BUCKET
4)30 INCH EXTREME DUTY TRENCHING BUCKET
5)48 INCH EXTREME DUTY DIGGING BUCKET
6)30,000 FT LB ROCKTEC TERMINATOR 30,000 FT LB DROP HAMMER FOR PULVERIZING LARGE BOULDERS - CONCRETE SLABS ETC
7)TRAMAC MT55 360 DEGREE ROTATION CONCRETE PROCESSOR - SHEAR
8)VIBRA-RAM 360 DEGREE ROTATION ASB800D DEMOLITION SORTING GRAPPLE
9) 66 INCH CLEANUP BUCKET
10) 56 INCH HENSLEY 2.56 YARD EXTREME DUTY 6 TOOTH DIGGING BUCKETZero Tail Swing Custom Demolition Guard Package As New 2016 JRB Hydraulic Pin Grabber Coupler
88,000 lb Machine With 80 Percent Plus Long and Wide Under Carriage
Fully Plumbed 3 Auxilary Hydraulic Circuits Case Drain - Full 7000 Hr Service Completed
Work Ready Fully Serviced Put It To Work Tomorrow
For Sale $165,000.00
CLEAR TITLE - LEASING AVAILABLE OAC - QUICK SAME DAY OR NEXT DAY APPROVALS
Frank 604-476-7777
Technical specifications for ECR305C
Here are the key specifications for this product model.
Metric
Operating weight 40,000 kg
Gross power 153 kW ...at engine speed 1,800 rpm
Bucket capacity 1.23 - 1.95 m³
Lifting capacity, along undercarriage 11,000 kg ...at reach / height 6 / 1.5 m
Max. digging reach 10,635 mm
Max. digging depth 6,960 mm
Breakout force, SAE J1179 (Normal) 163 kN
Breakout force, SAE J1179 (Boost) 173 kN
Tear out force, SAE J1179 (Normal) 127 kN
Tear out force, SAE J1179 (Boost) 135 kN
Overall width feet inches 3,590 mmCompact body
Confined areas now seem a lot less confining.
That's because you are free to work in your Volvo ECR305CL.
One lane of traffic. Next to buildings on busy streets. Between utility poles.
You can go where the work is, and you can handle it all with the power, lift capacity and stability you demand.
-
44
1999 kubota b2100. 4wd shuttle shift. 21hp. 3 point hitch. Rear and mid mount pto. 2100hrs. Other machinery and trailers and attachments available. Shipping available. Call 604-866-2631
-
45
2010 Lonestar 13 speed with Cummings ISX 500, clean truck runs great MVI till April 2021, 899000kms
Asking $37000 OBO
-
46
Attention Chain link fence contractors if you don’t have a Barbwire Hog, you need one. It makes putting 3 strands on top of the fence so much quicker with estimated labour savings of 20-30 hours/mile. We have a single new unit in stock at a great price it generally takes 4-5 weeks for us to get one of these built to order so don't wait any longer to add one of these attachments to your operation.
The Barbwire Hog effortlessly dispenses up to three rolls of barbed wire simultaneously for chain link security fence installation to save you time and money. Instead of worrying about the difficult labor required for a wire roll, workers simply need to operate the barbwire equipment and ensure the wire is secure after installation. This Barbwire Hog also comes with bottom wire option.
Install up to three strands simultaneously and complete jobs in a fraction of the time. The hydraulic arm is extremely mobile which allows the operator to accurately unroll wire right against the posts. The pivoting arm at the base makes it possible to lay new wire from either side of the fence.
Compact and easy to transport, the Barbwire Hog is easy to get in and out of busy job sites.
-
47
make / manufacturer CSM
1991 CSM 4 axle transfer trailer
-spring suspension
-floor has been repaired
Pulls straight great shapeSelling for $20,888
Local Delivery can be arranged in Lower mainland/Fraservalley
Call /text
604-788-2001
-
48
SERIOUS INQUIRIES ONLY. I AM RETIRING SO SELLING EVERYTHING
- front anxle 18000
- back axle 46000
- 4 wheel lock
- CAT 525 MBN single tubro
- nuway air ride suspension
- tires 80%
- 16.6 Langfab with high lift tailgate
- electric tarp
-
49
Peterbilt Leaf springs:
Front Leaf springs
Rear Leaf springsMid-Ranger
330 335 348 352
353 357 359 362
372 376 377 378 379
385 386 387
COE
Air SuspensionsCall or Email us for quote
800-661-4205
Dendoff Springs
12045 Old Yale Road Surrey BC
Hwy 17 and Old Yale Road
Manufacturing since 1906
Advance Mixer • American La France • Autocar • Binkley • Bluebird • Chalmers • Chevrolet • Crane Carrier • Dodge • Euclid • Ford • F150 F250 F350 F450 F550 E350 E450 Freightliner • Fruehauf • GMC • Hayes • Hendrickson • Hino • Hutchens • Hyster • International • Navistar Isuzu • Jeep • Kenworth • Big 6 Fat trucks• Mack • Mazda • Mercedes • Meritor • Mitsubishi • Navistar • Oshkosh • Ottawa • Neway • Nissan • Pacific Truck • Payhauler • Peerless • Peterbilt • Premier • Ram • Reyco/Transpro • Silver Eagle • Spartan Motor Home • Sterling sprinter • Thomas Bus • Toyota • Trailmobile • Volvo • Watson Chalin • Western Star
-
50
Ready for work , Whole unit for sale. Engine overhauled recently. 1050000 miles All leather studio sleeper with all amenities like tv,dvdplayer,microwave and fridge. Comes with headrack and moose bumber. Full locker diffs,bunk heater, inverter.
Specs-cummins 550,super forty rear.
For more information, contact (604) 366-3204