Cars & vehicles, Heavy equipment with in Canada, British Columbia, Peace River Country, Fort St. John.
-
1
Case 9120 in good condition
Duals
small tube rotor
Magna cut chopper with just over one season on new blades
Used for forage seed and lower through-put crops so wear low for the number of hours showing
2584 separator hours, 3852 engine hours
Air compressor
Bubble up auger replaced at start of grain harvest
Pro 600 display and nav II controller
Hopper extensions and extender on unload auger for 40 ft header
Comes with 2010 case 2016 16" swathmaster pickup header
Harvest services feeder chain
Open to any offers. Delivery may be included for the right buyers.
Contact Tobin 25O-26I-8358
-
2
D8 basket rake with skid
-
3
2010 Case 420 Series 3. Just over 2000 hrs on unit. Dash shows 240 hrs now but the dash was replaced at 1800 hrs. For more info or to see the unit call 250 263-2253
-
4
Agt H13r mini excavator new. Full cab ready to go. Plumbing installed for thumb or other attachment
Call or text 250-794-6551 located in fort St. John
-
5
2007 565 Cummins 500,000+ km
Can be heard running before removal
Good running conditionFor more info call 250-794-1444
-
6
2024 Titan 35' Tridem End Dump
..........In Stock Now..........- Polished Panels
- Alum Wheels
- Electric Mesh Tarp
- LED Lights
- Floor LinerPlease Contact
Chris Davidchuk
780-732-4337Financing Options Available
-
7
New Holland Power star T4.75 Ford Tractor. Comes with Bucket and bale forks. MINT condition, low hours - light use
-
8
open for offers
2'680 hours, new tires, DEF deleted, SCR in muffler replaced by baffles, 419 HP
engine updated by Red-M Mechanic, Innisfail:
new liner seals, new cam, crankshaft checked, all bearings inspected, new head gasket.Warranty!
Call, text or email for build sheet and more info
250.271.7013
-
9
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
U.S. Built With North American Components
3 Models To Choose - 120, 140B and The New 150 For Commercial and/or Residential use.
Excellent Shipping Rates Across CanadaAll functions are performed from the seat of the skid-steer loader so only one man and one machine is required to do the job that normally takes 2 to 3 people and a couple of pieces of equipment.
Operate From Comfort Of Your Cab Staying Warm In The Cold Winter Months
120 Skid Steer Residential Firewood Processor - Weight: 975 Lbs
140B Skid Steer H.D. Firewood Processor - Weight: 1450 Lbs
150 Skid Steer Commercial Firewood Processor: Weight 1,635 Lbs
• 4-Way or 6-Way Manual Adjustable Splitting Wedge {120 and 140B Models}
• 4-Way or 6-Way Hydraulic Adjustable Splitting Wedge On The Model 150
• Models 120 - 15" Maximum Log Diameter
• Models 140B - 16" Maximum Log Diameter
• Model 150 - 22” Maximum Log Diameter
• LOW FLOW Hydraulics
• Minimum 2800 PSI Required
• Case Drain is Required
• 8’ – 12′ Variable Log Length
• 22” Cut Length On All 3 Models
• Set Your Cut Lengths From 8" to 22" on 140B and 150
• 150 Extended Models - Up to 33" Cut Length
• HD Harvester Chain and Sprocket
• Automatic Oiler
• Universal Quick Attach Skid Steer Mount
• Control Options: Two 3-Button Controls For All 3 Models, 5 Function 12V Pistol Grip {120 and 140B Only}
or 14 Pin Wiring Harness - Dependant On Make of Machine {120 and 140B Only}
• Self-loading
• Average Log Processed in under two minutesCall For More Info and Details
BIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Spruce Grove, Ab.
CALL RANDY: 780-288-3668
http://www.bigfootenterprises.caUniversal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, Kubota and OthersAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 25 Cdn and U.S. Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
10
2016 Peterbilt tri-drive, good condition
-
11
Wide Cut Mill for sale, cut up to 60”x20’, it has a 17.5hp briggs that I bought new for the build and has been strong since day one. Belt driven to a pulley and shaft.
This is truly portable and setup time has been under 3 minutes from the time the truck is unhitched!
Hand crank carriage feed and power up/ down makes it super easy on the body to slab up some huge trees.
Cad designed and stress tested before building.
Frame and carriage has been designed to hold over 9200 pounds and have had over 9600 pound oak on it recently.
$500 in chains come with it.
Extra supports and log dogs also come with the unit.
Delivery to nearby provinces available, any further and or states side is buyers responsibility but know of a few transport companies that can haul anywhere in North America that I can give you contact details.
Location: New Brunswick, Canada
Asking $10,500CadShow less
-
12
Champion 740 Grader with wing all works just put new batteries in also have manual any questions feel free to contact me
-
13
Been awhile since we have seen a trade this clean! 2022 CS2520. Comes with front blower, loader, box blade, and tire chains. Only has 22 hours on it! This will certainly not last long. Come on in to discuss, we would love to put something together for you. $24995 plus fees and tax.
Please contact Kennebecasis Land & Leisure @ (506) 847-2792 or joe.armstrong@krentals.ca
-
14
Western V Plow 7 1/2 ft ..wire harness / Remote / front mounting plate NOTE : possible trade for side by side
-
15
Tire machine car lift Parking lift Wheel balancer Auto Hoist Mondial GP9L 9000Lbs Car Lift They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
MONDIAL AUTOMOTIVE EQUIPMENT, GP-9L is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. - The height of the lift is 9'4 "-
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32" with Supporting Bracket.
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 113 5/8"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Floor Plate Cross Section: 10 5/8"W x 1 7/8"H
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
16
2 furrow plough for sale
Great little plow
Could easily be reduced to a single furrow
-
17
Truck is in great shape, 450hp 18 speed. 16.5 foot box . 44000 rear ends 20000 front end. 556000 kms on it. Looking to sell but May be interested in John deer 450/550 or CAT d4 or d5 dozer with cab for trade. Will add money for the right machine. Asking 46000 or best reasonable offer. Call 506-467-7694
-
18
Heavy Truck Bumpers $350.00 each
-
19
New Holland 316 square baler and Ford Rake. The baler threw its time before I bought it. Bought as a parts baler but not farming anymore. Rake needs some new teeth and welding. Would be great projects or parts machines.
-
20
Tire machine changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
21
Brand new ALI Certified 10,000 lbs 2-Post hoists in stock!
The TLT-210-XT is an asymmetric, multi purpose lift that is height and width adjustable to fit your shops needs. It can be installed in a standard or rotated formation to accommodate a wide array of passenger vehicles. The lift is ALI/ETL certified and comes with a 1 year warranty. Features include:
- Adjustable columns and crossmember to adjust the height and width of the lift
- Rubber door guards to avoid damaging doors of vehicles
- Includes Tall and Short, stackable foot pad extensions
- Spin Up adaptors provide 6.5” adjustment for complete vehicle coverage
- Single Point Lock Release allows the technician to disengage both column locks simultaneously
- Premium SPX Stone Power Unit (pump) 230V, 1 PH, 60Hz
-
22
Im looking for good used tractors will look at any make or model year 2000 or newer. Cash in hand.
I am not a dealer.
-
23
Bobcat mt50 mini skid steer
Works great only 36 inches wide has quick attach. Tracks are in great shape weighs 2500 lbs and will pick up 750lbs great machine for tight areas has Kubota diesel Engin has 1700 hrs
16000 obo
-
24
Excelent condition low millage 6.7 L cummins diesel, automatic. Palifinger PK11502 frame mounted.
Current Alberta inspection.
-
25
THE OKADA 7500 FT LB HAMMER NEW COST IS $105,000.00 PLUS TOP MOUNTING BRACKET
THE OKADA 3000 FT LB HAMMER NEW COST IS $55,000.00 PLUS TOP MOUNTING BRACKET AND PINS
OKADA STAGE II REBUILDS ON BOTH HAMMERS - THESE HAMMERS ARE LOCATED AND WILL BE SHIPPED FROM OUR LANGLEY BC YARD
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND ONE NEW ORIGINAL OKADA MOIL AND 1 SLIGHTLY USED ORIGINAL MOIL POINT SO TWO MOIL POINTS .
RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A JUST HAD A $36,000.00 CDN COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $50,000.00 CDN
SEE IMAGE 3 FOR INVOICE IN USD FOR THE FACTORY REBUILT - RESEALED UNIT PRICE - THE ONLY THING WE DID NOT DO IS SANDBLAST AND PAINT AS THEY STATED IT WOULD BE A WASTE AS THE PAINT WAS GOOD AND AFTER ALL IT IS A HYDRAULIC HAMMER??
AND ALSO TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
26
Kverneland plough 14 inch
Depth wheel
I have various other plows for sale as well as misc. used plow parts available.
-
27
Car lift Parking Storage lift Wheel balancer New Parking Lift 900lbs MP-9 They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
NEW 110V CAR PARKING LIFT Auto Hoist STORAGE LIFT 90000lbs CSA
Looking to upgrade your garage, increase your parking space and get work done on your car?We’re excited to offer 4 post lifts with 9,000 lbs of lifting capacity - perfect for any garage or light commercial shop. These lifts are in stock RIGHT NOW and we can offer delivery across Canada.
Specs:
- 8 ½’ Wide - 14'‘ Long - 72” space under parking deck - 110V
3,500 lb sliding Scissor Jack, capable of an additional 19 INCHES of lift and a set of ALUMINUM RAMPS available as an option
Our 4 post lifts come with the following:
- 110V power unit - Standard Diamond Plate steel with ramps, or optional Premium aluminum approach ramps - Completely enclosed carriages for safety, with locks every 3.75” - 18.7” wide runways, formed with single piece, 3/16” non-skid diamond plate - Easy-operation lock handle located by power unit, minimizing any bending or squatting - 1/2” upper column locking pins for “Long Term Storage” included - Caster wheels, three steel drip trays, jack plate and mounting hardware included - 1 Year warranty on all parts; 5 Year on structure
-Transport service and delivery available across Canada
For more information contact us Tel:1-800-361-4095Address 8275 17th Avenue MONTREAL, QC H1Z4J9
-
28
Brand new westendorf brush crusher grapple , this is a mechanical grapple no 3rd function needed for john deere tractors.
-
29
Tire machine changer car lift Parking lift Wheel balancer They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market . The MONDIAL AUTOMOTIVE EQUIPMENT, GP-9 is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. -
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 5" thick at 3500 psi reinforced with fiberglass or steel (
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
30
For sale a all steel Flat Bed Dump. 14 feet long 8 foot wide and has 2 inch risers on sides. telescopic piston. It has all been rebuilt just last week! Ready to go asking 3700 neg.-price is a starting point?--or will trade for a chev or gm single axel dump truck with a dump with a 3 peace hoist -in good running shape--paper work not needed only-want an old farm dump truck--but in running order,-and a chev
-
31
2024 Titan Walking Floor Trailers
..........New Units In Stock..........
- Keith Walking Floor System
- Trison Side Roll Tarp
- Alum WheelsPlease Contact
Chris Davidchuk
780-732-4337Financing Options Available
-
32
Made in the Vanderhoof, British Columbia area, Canada and US patents. As the weather gets warmer and dryer these are good to have. Great set up with a water pump mounted inside the end for protection plus the compartment is designed to store firehouse, palasky, and a shovel as well as a few other necessities.
Designed to get to the fire quick before it gets out of hand or to knock out hot spots. Can fill up out of pretty much anything that has enough water in it. Creeks, swamps, tanks etc. Ready to go. Compact and self contained unit.
Call for more details. Call only 250-441-3280. Monday through Saturday! No answer? Leave a message. Some in stock!!
-
33
2012 bobcat T-190
-
34
Truck-Trailer-Manbasket package for sale.
Truck
-2006 T800 tri drive
-438,000km
-16,600hrs
- C15 Acert
- Eaton 18spd
- 445 steers
- Neway Suspension
- Effer 340.11/8s picker (12Ton W/ 72’ boom)
- Tulsa 30Ton winch (new cable)
Trailer
- 1998 Aspen 48’ oilfield float
- mid roll
- aluminum wheels
- new suspension
- low km unit
Manbasket
- Patterson Smide aluminum articulating basket
Truck is currently working and will have CVIP renwall in February
Located in Fort St John
-
35
2016 Kenworth W900L ICON tri/axle
Pri-emission
Studio sleeper 86"
Comes with early 1999 2WS Cat 550hp 1000hrs on overhaul, overhaul was done 2yrs ago with all cat original parts new sensors new engine harness no oil leaks .
Lots of updates on engine from v belt to ribbon belt new alternator new a/c compressor all new idlers bunch more
458000 kms on truck
18spd eaton automatic
All way full diff lockers
Hendrickson suspension
Disc brake
391 ratio 46rear
24.5 tires 90%
Headyrack
Big fuel tanks
Big air cleaners
Sofa bed Bunk bed
Fridge 3500W inverter
All black leather interior
Electric mirrors
Engine heater
Bunk heater
RD train herd bumper
Led lights all around
And lots more
Truck is working once awhile kms hrs will be going up
For more pictures or info
contact @ 7782565069
-
36
Truck-Trailer-Manbasket package for sale.
Truck
-2006 T800 tri drive
-438,000km
-16,600hrs
- C15 Acert
- Eaton 18spd
- 445 steers
- Neway Suspension
- Effer 340.11/8s picker (12Ton W/ 72’ boom)
- Tulsa 30Ton winch (new cable)
Trailer
- 1998 Aspen 48’ oilfield float
- mid roll
- aluminum wheels
- new suspension
- low km unit
Manbasket
- Patterson Smide aluminum articulating basket
Truck is currently working and will have CVIP renwall in February
Located in Fort St John
-
37
2016 Kenworth W900L ICON tri/axle
Pri-emission
Studio sleeper 86"
Comes with early 1999 2WS Cat 550hp 1000hrs on overhaul, overhaul was done 2yrs ago with all cat original parts new sensors new engine harness no oil leaks .
Lots of updates on engine from v belt to ribbon belt new alternator new a/c compressor all new idlers bunch more
458000 kms on truck
18spd eaton automatic
All way full diff lockers
Hendrickson suspension
Disc brake
391 ratio 46rear
24.5 tires 90%
Headyrack
Big fuel tanks
Big air cleaners
Sofa bed Bunk bed
Fridge 3500W inverter
All black leather interior
Electric mirrors
Engine heater
Bunk heater
RD train herd bumper
Led lights all around
And lots more
Truck is working once awhile kms hrs will be going up
For more pictures or info
contact @ 7782565069
-
38
If you want experienced financing aide with clear communication, call me, or, reply to this ad.
Kyle
equipmentease.ca
4033703375
-
39
Made in the Vanderhoof, British Columbia area, Canada and US patents. As the weather gets warmer and dryer these are good to have. Great set up with a water pump mounted inside the end for protection plus the compartment is designed to store firehouse, palasky, and a shovel as well as a few other necessities.
Designed to get to the fire quick before it gets out of hand or to knock out hot spots. Can fill up out of pretty much anything that has enough water in it. Creeks, swamps, tanks etc. Ready to go. Compact and self contained unit.
Call for more details. Call only 250-441-3280. Monday through Saturday! No answer? Leave a message. Some in stock!!
-
40
04 kenworth T300 very good farm truck for more info call vic 250263599two no email please
-
41
2006 swather triple delivery(Manuel shift) 2350 hrs
-
42
04 kenworth T300 very good farm truck for more info call vic 250263599two no email please
-
43
Complete long log rig up. Cab guard, wrappers, boomers, pintle hitch with anti slack, safety chain tail frame mount, tractor log bunk and cradle and of course the 1999 Arctic pole trailer. Trailer had cvip when intially purchased. All lights new and switched to LED, painted, tires new. Delivery available
-
44
1978 Versitile 835 with 12ft Leon 6-way Blade
855 cummins motor with low hrs after rebuild
Puts out 400 hp
Excellent snowplow tractor
Newer tires on front axle
8296 hours on tractor
Owned since new
Cutting edge on blade in very good shape except small chip out of left side
Contact Tobin 25O-26I-8358
Open to offers
May also have 2004 Case IH STX450 quadtrac available
-
45
Complete Company Dispersal
Owner Retiring, 50 years in business.
Located in Fort St John BC2014 Tridem Peterbilt Box truck
473,000 km
9,700 hrs total
(3,500 hrs on new engine)
ISX 550 altered
Transmission and clutch has approx 160,000 km on it
Langfab rig up, 19' 6" box Hi lift, auto tarp, raised sides, sealed gate, Hazardous Waste locks.
20,000 steer axle
$150,000 obo2012 Tridem Peterbilt Box truck
590,000 km
16,000 hrs
ISX 550 altered
Recent Transmission and clutch
Langfab rig up, 19' 6" box Hi lift, auto tarp, raised sides, sealed gate, Hazardous Waste locks.
20,000 steer axle
Asking $140,000.00 oboMultiple Tridem Pups available as well
Call for more info please
250-262-7883
-
46
Truck-Trailer-Manbasket package for sale.
Truck
-2006 T800 tri drive
-438,000km
-16,600hrs
- C15 Acert
- Eaton 18spd
- 445 steers
- Neway Suspension
- Effer 340.11/8s picker (12Ton W/ 72’ boom)
- Tulsa 30Ton winch (new cable)
Trailer
- 1998 Aspen 48’ oilfield float
- mid roll
- aluminum wheels
- new suspension
- low km unit
Manbasket
- Patterson Smide aluminum articulating basket
Truck is currently working and will have CVIP renwall in February
Located in Fort St John
-
47
07 Peterbilt with a 525 hp Cummins. 7k hrs on cummins rebuild. 18 speed and 46k rears
Tri drive with a large slide and fifth wheel for pinned for frameless dump trailers. Plumbed for side dump and clam as well. Good shape and ready for work 778 256 5060
-
48
2024 Titan 35' Tridem End Dump
..........In Stock Now..........- Polished Panels
- Alum Wheels
- Electric Mesh Tarp
- LED Lights
- Floor LinerPlease Contact
Chris Davidchuk
780-732-4337Financing Options Available
-
49
2013 tr320 5300hrs new zig zag tracks, heat, a/c, air seat, stereo, clean unit, asking $50,000 obo skidsteer track loader
-
50
If you want experienced financing aide with clear communication, call me, or, reply to this ad.
Kyle
equipmentease.ca
4033703375