Jobs, Programmers, computer with in Canada, Ontario, Kapuskasing.
-
1
Job Description:Job Description Job description Electronics4all is seeking talented, independent individuals that have previous experience in analog, digital and mixed signal circuit design. The ideal candidate is expected to demonstrate knowledge on a broad range of systems and circuits, including Power supplies, small signal, signal processing, microcontroller-based systems, serial communications channels, ADC/DAC converters, EMI/EMC filtering and protection. Key Responsibilities:Analyze product requirements and create a detailed hardware architecture and formal structured designConduct circuit analysis from requirements to formal designPerform simulations to validate design choicesDesign of electronic circuits using suitable components, systems and equipment [Schematics and Layout]Design auxiliary tools, prototypes and test interfacesCircuit debugging and troubleshootingPrepare product operational documentation to support software development Required Skills:Bachelor’s, Master’s, or PHD Degree in Electrical EngineeringAnalog, Digital and Mixed Signal Circuits Analysis and Design experienceEmbedded SystemsRF Bluetooth devices/ Lora 900MHzDC/DC Power ConvertersA/D and D/A ConvertersPassive and Active FiltersMicroprocessors and microcontrollersSerial Communication (UART, SPI, I2C, USB, I2S, Ethernet)Schematic Drawing using Altium DesignerAbility to manage time effectively to meet schedule commitmentsGood oral/written communication and interpersonal skills to support work in a team environmentSelf-started, versatile and eager to learn Desired Skills:Hands-on PCB Layout knowledgeAnalog circuit simulationDFT and DFM techniquesExperience with Altium Designer, Matlab and PSPICEexperience with FCC/ IC certification is a bonus Job ID: 46397278
___________________
Electronics4All Inc.
-
2
Job Description:Job Description We are seeking an Electrical Engineer to become an integral part of our team! The Electrical Project Engineer is responsible to provide technical support and oversight during planning, development, execution and commissioning of plant modifications. The project engineer must be knowledgeable of the technical and quality requirements and the regulatory codes and standards applicable to the discipline used in the preparation and review of work procedures. There is expectation on support project development phase by reviews during 50% and 90% design package submissions from constructability and execution standpoint. Have a strong ability to work with different work groups. It is expected the project engineer have a strong understanding of Nuclear power plant operations, including a working knowledge of the operations and maintenance components of the plant. Responsibilities: • Manages projects for safety, quality, productivity, asset reliability, process improvement, cost reduction and other business objective improvement. • Projects from initial concept and scope development through design, procurement, construction/installation and start-up. • Provides instruction in operation, set-up, maintenance, troubleshooting, repair and ensure work quality and adherence to established policies and procedures. • Utilize your background in Electrical Hardware, Automation Systems, and Process Control Systems. • Support the planning, prioritizing, and reviewing the technical plans for engineering/maintenance of the production and facility equipment including the preparation of project plans, schedules, budgets and proposals. • Establish schedules and methods for providing services; identifying resource needs; reviewing needs, allocating resources accordingly, and effectively communicating action plans/repairs. • Participate in the development of control policies and procedures and making recommendations for changes and improvements to existing standards and procedures. • Analyze and interpret all project related documents (electrical, mechanical, architectural, etc.) to accurately quantify all controls and instrumentation scope items provided in bid package. • Produce accurate control system and control panel design submittals and schedules. • Accurately quantify all material and labor requirements associated with the project. • Evaluate and review of all estimates with the Senior Engineering Manager for accuracy, value analysis and appropriate profit margin. • Manage multiple projects simultaneously and prioritize projects in accordance with deadline requirements. • Work in conjunction with Customer, Senior Engineer, Consulting Engineers, Pre-Construction and Contract Managers to prepare an accurate design proposal or schedule.Qualifications: • Efficiently plan and coordinate on-site engineering and construction activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and provided funding by performing the tasks personally or through subordinate supervisors. • Strong understanding or codes and standards• Experience with Engineering and Project Change Control Systems• Strong communication skills• Requires knowledge of physics, chemistry, metallurgy, mathematics, electricity, engineering and economics to technically understand the operation of the facility. • Requires strong technical writing skills for preparing specifications, work instructions, asset management documents, and planning documents. • Must have a demonstrated ability to prepare clear and concise reports. • Must be able to propose recommendations and resolution to technical issues both verbally and in writing. • Ability to interface effectively with Plant Operations, Plant Engineering, Maintenance, other technical staff, Regulators and other stakeholders. • Ability to interact positively with others by developing trust, mutual respect and cooperative working relationships. • Requires experience to solve problems, to provide advice and guidance, to initiate developmental studies and to make recommendations during the design, commissioning and operation of a nuclear facility; to evaluate components or materials, and to perform economic studies and evaluations associated with the design, commissioning and operation of a nuclear facility and at all times to work safely. Company Description Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario’s refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team’s diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their business and project objectives. We deliver safe and quality product within Client’s schedule and cost constrains by Doing It Right the First Time. Our team of professionals is credited with in-depth knowledge of the Nuclear Industry’s regulations, standards and license requirements in Canada. Globotech’s multi-discipline organizational structure combined with cross functional experiences with CANDU technology put our firm on a prime position to offer a wide spectrum of cost-effective solutions to our clients.Company Description:Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario’s refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team’s diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their business and project objectives. We deliver safe and quality product within Client’s schedule and cost constrains by Doing It Right the First Time. Our team of professionals is credited with in-depth knowledge of the Nuclear Industry’s regulations, standards and license requirements in Canada. Globotech’s multi-discipline organizational structure combined with cross functional experiences with CANDU technology put our firm on a prime position to offer a wide spectrum of cost-effective solutions to our clients. Job ID: 9591421
___________________
Globotech Inc.
-
3
Job Description:Job Description Remmen Brakes is a company focused on innovating vehicle braking systems. We are pioneering the adoption of a new braking technology that will change the way we look at vehicle safety and dynamics and are looking for a forward-thinking, creative, and innovating Controls Engineer to join our team. The candidate will be responsible for the development, refinement, testing and execution of proprietary control software and rudimentary vehicle dynamics software. The position will require the candidate to support and lead the integration activities related to our Nonlinear Electro-Mechanical Brake (NEMB) technology. The role requires a hands-on, motivated and broadly capable engineer with demonstrated capabilities spanning electronics and computer systems, BLDC motor control, embedded software, and complex mechanical products. Some of what you will do:Provide specialist capability in the development, refinement, integration, testing and debugging of software for newly developed electro-mechanical braking systems from initial prototype through to production.Support and lead client facing engagements to modify Remmen’s proprietary software to suit customer control module requirements.Develop the expertise to be a ‘hands-on’ software and controls expert for the NEMB, with intimate and deep knowledge of how the system is built, functions and meets its goals.Create test methods, software, scripts and hardware to support system integration and test activities.Build, deploy, and support instrumented test setups, functional mock ups and lab configurations per test plans. Support testing and integration at third-party facilities.Execute integration test activities, identify, track and debug critical design issues and work with internal and customer engineering teams to implement and verify resolutions.Develop and/or review test plans, create test reports and issue resolution reports.Participate in technical design reviews, work with design teams to develop integration and test strategies.Provide support to manufacturing test strategies and systems, support integration, failure analysis and debug during ramp to mass production. Education and Experience Requirements:A Master’s degree or a Bachelor’s degree in Mechatronics, Automotive Software, or System engineering or related fields.Extensive experience working with MATLAB and MATLAB Simulink: model-based control systems, generate C-code, compile, mask software blocks, upload firmware to MCUs, etc.Experience in modelling and controlling complex electro-mechanical systems utilizing BLDC motors. Experience with FOC motor control is an assetFamiliarity with vehicle dynamics and an understanding of how braking relates to stability, speed, and safety.Knowledge and experience with testing and design verification at system and sub system levels.A high level of analytical ability and a positive and motivated attitude for trouble-shooting and solving problems that are unusual and complex. Preferred ExperiencesFamiliarity with products that require Automotive Safety Integrity Level classifications (ISO 26262)Experience with integration of electronic systems into automotive platformsFamiliarity with, and an understanding of, embedded systems design and architectureFamiliar with ISO/TS/IATF 16949 requirements, and/or experience in working in a TS/ISO certified design and development environment. ‘Must Have’ Soft Skills:Ability to communicate effectively in English – verbally and in writing.Ability to establish and maintain effective working relationships with others.Ability to provide project leadership, coordination, guidance and drive issue resolution.Capable of working in a fast-paced environment.Capability and desire to learn, absorb new information and adapt to challenging project needs.Places importance on attention to detail and maintaining high quality standards.Places importance on organization and archiving of design and critical documents.Ability to respond to frequent pressure to meet deadlines.Capable of working in a pro-active manner with minimal supervision. Company Description Remmen Brakes is focused on delivering innovative and disruptive automotive braking technology solutions to the next-generation vehicle platforms.Company Description:Remmen Brakes is focused on delivering innovative and disruptive automotive braking technology solutions to the next-generation vehicle platforms. Job ID: 31820127
___________________
Remmen Brakes
-
4
Job Description:Job Description Ultrasound Sonographer required for expanding Ultrasound and X Ray clinic. Must be certified and have at least two years of experience and qualified to perform all diagnostic procedures. Kindly provide a resume with your application. Compensation is based on experience. All applications will be considered on a confidential basis. Job ID: 33832471
___________________
TORONTO QUEENSWAY ULTRASOUND & X-RAY DIAGNOSTICS LTD.
-
5
Job Description:Job Description We are hiring for one of our clients in Concord for the position of CNC Programmer and setup professional for the Aeroplane industry. Pay rate: $25-$30 Roles and responsibilities:Study blueprints, work order, or machining instructions to determine product dimensions, tooling, and to plan operational sequence.Observe and adjust machine operation.Machine Control which includes pull and send programs; tool change; trouble shooting; entering tool offsets; M.D.I.Understanding setup sheets, tool lists and Operational Detail SheetsCalculating Work Offsets/IndicatingUnderstanding programmed tool pathTightening and clamping pressures (i.e. ‘Free State’ condition and part clamped maintaining free state)Cutting pressures/Boring Bar adjustments; spring pass; test cut boreCalculating Work OffsetsTape proving new and modified programs, anticipating what the machine will do before it cutsPreventive maintenance5-S ActivitiesPre-start up inspections which incorporate Health & Safety awarenessRunning a combined number of machines simultaneously in a safe and effective manner. (Combo)Other duties as assignedAdhering at all times to company policies, procedures and health and safety requirements Specific skills requirement:Minimum 5 years machining/manufacturing experience, preferably in an aerospace manufacturing environment.Ability to help produce large, high quality parts in a safe, productive and efficient manner.Ability to take direction from and interact with co-workers in a productive and positive manner.Minimum Gr. 12 education required.Candidates must meet security screening requirements as set out by ITAR/CGRP directives. Job ID: 45053937
___________________
Jobs For U
-
6
Job Description:Job Description Antalex Inc. is looking for a full time Wood Engineer/Detailer and a full time Metal Engineer/Detailer to join our team.Candidate must be fluent in English. We are specialists in designing and manufacturing custom store fixtures. Our team designs from the architectural concepts and produces detail manufacturing drawings for our millwork and metal plants. Start Date: As soon as possibleLocation: 170 Sharer Rd., Woodbridge, ONEducation: Completion of high school, completion of College/Technical Training ProgramExperience: 3-5 YearsProduce detail drawings in a timely mannerEnsure the most efficient construction methods and drawing techniques are used, under the direction of the Engineering ManagerEnsure all projects meet the production and construction scheduleEnsure project is built as specified by co-ordinating with Client and DesignerExercise initiative to obtain information required to complete drawingsFurnish project manager with drawings that are pertinent to site workMaintain files for all drawingsCoordinating with estimating, purchasing and the shop floorFollow project through shop to ensure correct construction Requirements:2+ years of Solidworks experience working with wood/metal productsAbility to create Solidworks drawings from customer specificationsProficient in Solidworks, AutoCAD & Microsoft Office applications Company Description Looking for a place that values your experience and rewards you for your performance?At Canada’s Best Store Fixtures, we are one of Canada’s largest retail environment design-builders. Our career opportunities include design, engineering, metal and millwork fabricators, installers, and project managers.All employees enjoy a competitive salary and an incredible opportunity for development with experienced trainers and veteran staff who are always eager to lend their full support to new employees.Our growth is your opportunity to join a great company! Throughout our offices, wood, plastic and metal production facilities, warehouse and field execution teams we have challenging and interesting work in a variety of roles. We are always interested in meeting talented people with industry experience who would like to join a winning team.Company Description:Looking for a place that values your experience and rewards you for your performance?\\r\
\\r\
At Canada’s Best Store Fixtures, we are one of Canada’s largest retail environment design-builders. Our career opportunities include design, engineering, metal and millwork fabricators, installers, and project managers.\\r\
\\r\
All employees enjoy a competitive salary and an incredible opportunity for development with experienced trainers and veteran staff who are always eager to lend their full support to new employees.\\r\
\\r\
Our growth is your opportunity to join a great company! Throughout our offices, wood, plastic and metal production facilities, warehouse and field execution teams we have challenging and interesting work in a variety of roles. We are always interested in meeting talented people with industry experience who would like to join a winning team. Job ID: 37848816
___________________
Canada's Best Store Fixtures Inc.
-
7
Job Description:Job Description Company Profile:Tier II Automotive Manufacturing120+ employees.2 Shift Operation.Day Shift from 8:00am-4:30pmMain process is Cold Heading / Cold FormingCompany is ramping up production and has NEVER slowed down - $15mm in business coming in, $3mm project from Europe Automotive Design Engineer:Must have experience working in a Manufacturing EnvironmentCold Heading / Cold Forming / Stamping experience preferredTool and Product DesignersSolidworks / AutoCADFULL TIME, IN HOUSE POSITION - NO WORK FROM HOME Job ID: 49138234
___________________
Grant Martin & Associates
-
8
Job Description:Job Description The opportunity: We are seeking a Business Systems Analyst that will be responsible for providing financial reporting on all ORBCOMM customer devices. This will require a deep understanding of ORBCOMM device life cycles, automated and manual financial accounting processes, and systems as well as the capability to speak at both the Executive and C-Suite high level as well as technical deep-dive discussions with focused cross-functional teams. With extensive knowledge of information systems and employer's operations, those in this position are expected to understand ORBCOMM’s business processes and ever-changing business requirements as the organization rapidly expands and enters various new markets. Responsibilities:Responsible for tracking and reporting financial information pertaining to ORBCOMM’s customers devices, such as but not limited to device revenue, cost, margin, ASP, etc. Work closely with cross-functional team members to understand existing systems and processes to be able to provide device level financial reporting metrics.Troubleshoot discrepancies, communicate systems and process issues, and improve overall data quality and system use.Document standard processes and common problems.Generate various financial reports upon request.Gather requirements and analyze data, develop solutions, project consequences, and evaluate results.Establish and maintain working relationships and interact with staff with limited computer knowledge.Gain cooperation and consensus through discussion and persuasion.Influence others to work together toward common goals. Qualifications:Requires 5-10 years of related experience.Familiarity with Windows is required and experience with Unix-like Operating Systems is strongly preferred.Familiarity with advanced database technology and database design methods (MS SQL Server, PostgreSQL) are needed.Strong analytical skills and extensive experience with Excel are a must. Knowledge of Microsoft Office (PowerPoint, Word, Outlook), e-mail, and internal collaboration platforms (e.g., MS Teams) is required for this position.Must have good interpersonal skills and excellent oral and written communication skills.Must be able to work well as part of a team.Ability and desire to quickly learn new systems and software are a must. A bachelor's degree in computer science, engineering, finance or a related field is required for this position, and applicants with significant prior work experience are desired.Experience with large accounting or enterprise resource planning (ERP) systems highly desirable. About ORBCOMM Inc. ORBCOMM is a pioneer in IoT technology, empowering customers with insight to make data-driven decisions that help them optimize their operations, maximize profitability and build a more sustainable future. With 30 years of experience and the most comprehensive solution portfolio in the industry, ORBCOMM enables the management of over a million assets worldwide for a diverse customer base spanning transportation, supply chain, heavy equipment, maritime, natural resources and government. For more information about how ORBCOMM is driving the evolution of industry through the power of data, visit www.orbcomm.com.Interested? At ORBCOMM, we believe that our people are our strength. Our success stems from our ability to attract and retain the best people who deliver a high level of performance and skill. If you are looking for a significant career opportunity and the chance to work for an established, successful and high growth company, ORBCOMM is the ideal place for you. We are committed to employment equity. ORBCOMM would like to thank all applicants in advance and advise them that only candidates selected for an interview will be contacted. ORBCOMM is committed to providing accommodations for persons with disabilities. Accommodations are available upon request for candidates taking part in all aspects of the selection process. Job ID: 35269100
___________________
ORBCOMM
-
9
Job Description:Job Description We are hiring for one of our clients in Concord for the position of CNC Programmer and setup professional for the Aeroplane industry. Pay rate: $25-$30 Roles and responsibilities:Study blueprints, work order, or machining instructions to determine product dimensions, tooling, and to plan operational sequence.Observe and adjust machine operation.Machine Control which includes pull and send programs; tool change; trouble shooting; entering tool offsets; M.D.I.Understanding setup sheets, tool lists and Operational Detail SheetsCalculating Work Offsets/IndicatingUnderstanding programmed tool pathTightening and clamping pressures (i.e. ‘Free State’ condition and part clamped maintaining free state)Cutting pressures/Boring Bar adjustments; spring pass; test cut boreCalculating Work OffsetsTape proving new and modified programs, anticipating what the machine will do before it cutsPreventive maintenance5-S ActivitiesPre-start up inspections which incorporate Health & Safety awarenessRunning a combined number of machines simultaneously in a safe and effective manner. (Combo)Other duties as assignedAdhering at all times to company policies, procedures and health and safety requirements Specific skills requirement:Minimum 5 years machining/manufacturing experience, preferably in an aerospace manufacturing environment.Ability to help produce large, high quality parts in a safe, productive and efficient manner.Ability to take direction from and interact with co-workers in a productive and positive manner.Minimum Gr. 12 education required.Candidates must meet security screening requirements as set out by ITAR/CGRP directives. Job ID: 45053937
___________________
Jobs For U
-
10
Job Description:Job Description Facilisgroup LLC is a leading technology provider in the Promotional Products (promo) industry, building software-as-a-service solutions that help promo distributors be more efficient and grow their sales. Over $1 billion in sales are processed through organization’s technologies annually. We are growing our Infrastructure and Security team. Reporting to the Vice President of Infrastructure and Security, the Infrastructure Engineer will monitor, maintain, and administer over IT environments, working with other team members to sustain efficient, secure, and reliable platforms in alignment to regulatory and industry best practices. As part of the Technology division, the Infrastructure Engineer will work across Facilisgroup’s technology landscape, supporting our Product, IT, DevOps, Security and Engineering teams for infrastructure requirements for both on-premises and cloud environments. The successful candidate must demonstrate a sound understanding of technology infrastructure, security, and hosting services to ensure our products are available, stable, and efficient. Key Responsibilities: Design and maintain IT infrastructure aligned to meet business requirements, including hosting services, network connectivity, redundancy, performance, and storage.Develop and maintain up-to-date design, build, and process technical documentation.Continuously enhance the reliability, security, and operations of the organization’s infrastructure and products.Collaborate with members of the Product, Engineering, DevOps, and Security teams as well as other Infrastructure team members to develop and support products.Support day-to-day operations and /or incident management in alignment to established service level agreements, including after hours and weekend support as needed.Take lead in troubleshooting infrastructure related issues proactively to ensure stability, support, and service delivery excellence of products.Investigate SOC generated alerting and respond accordingly in a timely manner. Work closely with the DevOps team as well as other Infrastructure team members to assist with the automation of workflows.Stay up to date on new and upcoming technologies that can be incorporated into the company’s technology strategy.Creation of appropriate dashboard reporting for performance monitoring and logging. You bring with you:Strong IT infrastructure knowledge with understanding of hybrid cloud environments.Demonstrated experience in networking, server administration, system hardening, automation as well as identity and access management.Proficient with Microsoft Windows Server, Active Directory and Virtualization.Recognized networking certification or qualification.Fluency with scripting languages such as SQL, PowerShell and Javascript.Ability to build rapport and trust quickly to support fast-paced DevOps and Engineering teams within Agile processes.Excellent communication and interpersonal skills with an aptitude for collaboration and developing team relationships across the organization. Experience and Qualifications 7-10 years’ experience in IT with at least 3 years in infrastructure support.A bachelor’s degree in a computer or technology-related field and/or equivalent years of education and experience working in a related field.Demonstrated experience working in a dynamic environment dealing with complex problems and communicating across various levels of the business.Experience with on-premises and cloud infrastructure platforms including support.Demonstrated success working with internal and external stakeholders. Good to have: Experience working with Linux Operating systems.Experience and /or certification with Microsoft Azure.Experience working with Microsoft Azure is preferable.Experience working in a SaaS or software development industry.Working knowledge of open-source technologies such as Redis and the ELK stack.Good working knowledge of ITIL and ITSM processes, specifically Problem Management, Incident Management, Service Requests, and IT Asset Management. Job ID: 32205163
___________________
Facilisgroup
-
11
Job Description:Job Description Job Title:- Azure Data Engineer Location:- Remote (Canada) Mode Of Hiring:- Contract Job Description:-Experience designing, building, and deploying scalable Azure cloud based solution architecturesExpertise in Python, SQLExperience building date lakes & data warehouses to support operational intelligence and business intelligenceExperience with Azure Synapse Analytics, Azure Data Lake, Azure Data Factory, Azure SQL, Azure Databricks or equivalent tools and technologiesExperience with Kafica and/or other event streaming mechanismsPerform data model design and implementationGood understanding and/or experience writing software imed he or more languages, such as PythonFamiliarity with standard IT security practices such as identity and access management, 550, data protection, encryption, certificate, and key management. Company Description E-Solutions Inc. is a 15-year-old company having 15 Global Offices across 5 Nations and with more than 1000+ IT & Software professionals. Working on cutting-edge technologies, we are serving 100+ Fortune2000 companies globally. Disclaimer: E-Solutions Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. We especially invite women, minorities, veterans, and individuals with disabilities to apply. EEO/AA/M/F/Vet/Disability.Company Description:E-Solutions Inc. is a 15-year-old company having 15 Global Offices across 5 Nations and with more than 1000+ IT & Software professionals. Working on cutting-edge technologies, we are serving 100+ Fortune2000 companies globally. \\r\
Disclaimer: E-Solutions Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. We especially invite women, minorities, veterans, and individuals with disabilities to apply. EEO/AA/M/F/Vet/Disability. Job ID: 35746615
___________________
e-Solutions Inc
-
12
Job Description:Job Description ORBCOMM currently has an opening for a Junior Hardware Engineer on the Hardware team within the Product Development department. The Hardware team is a multidisciplinary, multi-site team consisting of electrical design, layout, industrial engineering, and documentation that works closely with the Embedded Systems, Product Integrity, and Software Engineering teams. The successful applicant will share in the responsibility of designing, validating and testing ORBCOMM’s industrial IoT devices and sensors. Additional duties include participation in design reviews, testing and test automation, and documentation in our product lifecycle management tool. This is a full-time position, which requires an in-office presence in order to support various aspects of the business, the successful candidate will work in our Sterling, Virginia office. Duties and responsibilities include:Electrical designDesign and development of satellite, cellular, BLE, LoRa industrial IoT productsComponent selection and schematic capturePCB layout supportPCB and schematic design reviewSchematic, BOM, and component documentationTesting and design verificationFunctional and parametric testing over industrial temperature rangeFailure root cause analysisFull product life cycle supportProviding installation and product certification supportCustomization of standard products for specific large projectsSupporting manufacturing for new product introductionSupply chain engineering supportOtherStrong English language skills are a mustInternational languages an assetHardware bench skills (soldering, debug, test automation)Strong analytical and problem-solving skillsHighly organized with attention to detail and strong time management skillsQualificationsExperience in a similar positionBachelor’s degree in Electrical Engineering About ORBCOMM Inc. ORBCOMM is a pioneer in IoT technology, empowering customers with insight to make data-driven decisions that help them optimize their operations, maximize profitability and build a more sustainable future. With 30 years of experience and the most comprehensive solution portfolio in the industry, ORBCOMM enables the management of over a million assets worldwide for a diverse customer base spanning transportation, supply chain, heavy equipment, maritime, natural resources and government. For more information about how ORBCOMM is driving the evolution of industry through the power of data, visit www.orbcomm.com. Interested? At ORBCOMM, we believe that our people are our strength. Our success stems from our ability to attract and retain the best people who deliver a high level of performance and skill. If you are looking for a significant career opportunity and the chance to work for an established, successful and high growth company, ORBCOMM is the ideal place for you. We are committed to employment equity. ORBCOMM would like to thank all applicants in advance and advise them that only candidates selected for an interview will be contacted. ORBCOMM is committed to providing accommodations for persons with disabilities. Accommodations are available upon request for candidates taking part in all aspects of the selection process. . Job ID: 42636917
___________________
ORBCOMM
-
13
Job Description:Day to day site operations and supervisory role of geotechnical and environmental soil investigations with monitor well installation Job ID: 30169281
___________________
Powerhouse drilling
-
14
Job Description:We are seeking an Electrical Engineer to become an integral part of our team! The Electrical Project Engineer is responsible to provide technical support and oversight during planning, development, execution and commissioning of plant modifications. The project engineer must be knowledgeable of the technical and quality requirements and the regulatory codes and standards applicable to the discipline used in the preparation and review of work procedures. There is expectation on support project development phase by reviews during 50% and 90% design package submissions from constructability and execution standpoint. Have a strong ability to work with different work groups. It is expected the project engineer have a strong understanding of Nuclear power plant operations, including a working knowledge of the operations and maintenance components of the plant. Responsibilities: • Manages projects for safety, quality, productivity, asset reliability, process improvement, cost reduction and other business objective improvement. • Projects from initial concept and scope development through design, procurement, construction/installation and start-up. • Provides instruction in operation, set-up, maintenance, troubleshooting, repair and ensure work quality and adherence to established policies and procedures. • Utilize your background in Electrical Hardware, Automation Systems, and Process Control Systems. • Support the planning, prioritizing, and reviewing the technical plans for engineering/maintenance of the production and facility equipment including the preparation of project plans, schedules, budgets and proposals. • Establish schedules and methods for providing services; identifying resource needs; reviewing needs, allocating resources accordingly, and effectively communicating action plans/repairs. • Participate in the development of control policies and procedures and making recommendations for changes and improvements to existing standards and procedures. • Analyze and interpret all project related documents (electrical, mechanical, architectural, etc.) to accurately quantify all controls and instrumentation scope items provided in bid package. • Produce accurate control system and control panel design submittals and schedules. • Accurately quantify all material and labor requirements associated with the project. • Evaluate and review of all estimates with the Senior Engineering Manager for accuracy, value analysis and appropriate profit margin. • Manage multiple projects simultaneously and prioritize projects in accordance with deadline requirements. • Work in conjunction with Customer, Senior Engineer, Consulting Engineers, Pre-Construction and Contract Managers to prepare an accurate design proposal or schedule. Qualifications: • Efficiently plan and coordinate on-site engineering and construction activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and provided funding by performing the tasks personally or through subordinate supervisors. • Strong understanding or codes and standards • Experience with Engineering and Project Change Control Systems • Strong communication skills • Requires knowledge of physics, chemistry, metallurgy, mathematics, electricity, engineering and economics to technically understand the operation of the facility. • Requires strong technical writing skills for preparing specifications, work instructions, asset management documents, and planning documents. • Must have a demonstrated ability to prepare clear and concise reports. • Must be able to propose recommendations and resolution to technical issues both verbally and in writing. • Ability to interface effectively with Plant Operations, Plant Engineering, Maintenance, other technical staff, Regulators and other stakeholders. • Ability to interact positively with others by developing trust, mutual respect and cooperative working relationships. • Requires experience to solve problems, to provide advice and guidance, to initiate developmental studies and to make recommendations during the design, commissioning and operation of a nuclear facility; to evaluate components or materials, and to perform economic studies and evaluations associated with the design, commissioning and operation of a nuclear facility and at all times to work safely. Company Description Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario's refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team's diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their buCompany Description:Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario’s refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team’s diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their business and project objectives. We deliver safe and quality product within Client’s schedule and cost constrains by Doing It Right the First Time. Our team of professionals is credited with in-depth knowledge of the Nuclear Industry’s regulations, standards and license requirements in Canada. Globotech’s multi-discipline organizational structure combined with cross functional experiences with CANDU technology put our firm on a prime position to offer a wide spectrum of cost-effective solutions to our clients. Job ID: 9591421
___________________
Globotech Inc.
-
15
Job Description:We are seeking an X-Ray / BMD / Ultrasound Technologist & Receptionist to join our team for Full-time and Part-time. For Details, Apply Online at Company Description Offers a range of Medical Diagnostic Services Focused on offering high quality medical imaging and imaged guided procedures.Company Description:Offers a range of Medical Diagnostic Services Focused on offering high quality medical imaging and imaged guided procedures. Job ID: 18748304
___________________
Med Image Diagnostic Centre
-
16
Job Description:Company Overview Property Pathways Inc. is a progressive firm that focuses on a range of single-family conversion projects throughout the GTA and surrounding areas. We offer client a full architectural building permit solution for their renovations. Our focus is to pioneer a positive customer service experience through our nine step process, thoughtful customer interaction and 3D software integration. Our customer values our 3D Scanning Site Measure, and 3D Virtual Reality Design Discussion that we offer in house. As our team grows and we continue to innovate and implement new technology and procedures into our daily operations, we also continue to seek learners and leaders to support our rapid growth. As an Architectural Technologist you will directly contribute to the daily production of the customer's overall experience as they progress through our internal process. You'll engage with with customers virtually via online conference tools to learn about their project and deliver important zoning bylaw information and present concept design layouts. During in-person site visit you'll interact with clients and learn more about their project as the 3D scanner capture the existing site data. As you manage your portfolio of projects, you'll be responsible for coordinating with our engineering team member and liaison with the building department to deliver a seamless experience. Job Description Property Pathways Inc. is seeking an ambitious, enthusiastic, and detail-oriented candidate that can oversee projects from start to finish. Responsibilities include and are not limited to the following: * Contribute to the coordination and preparation of complete working drawing packages and construction documents in Revit 2019 - 2021. * Conduct site measure using portable 3D laser scanning technology. * Research and implementing zoning By-laws, along with other applicable regulations. * Attend Committee Of Adjustment hearings. * Assist with interpreting the Ontario Building Code * Produce photorealistic rendition of plans and elevation as required for project presentation * Work collaboratively in a diverse and inclusive team, working together toward technical excellence. * Attend project team meetings. * Use problem-solving skills to overcome technical challenges. * Visit job sites to gather essential data for the design and implementation of projects, as required. Requirements * Architectural Technology Diploma/Certification. * Between 2 - 5 years working experience as an Architectural Technologist in an Architecture or design firm, with at least 2 years coming from within Canada * Proficient with Revit 2019 - 2021 and the use of point cloud * Experience working with residential and mix-use conversion projects * Ability to work in a fast pace environment * Knowledge of local bylaws and the Ontario building codes * Strong technical, written, and verbal communication skills * Leadership potential and self-motivated starter * Valid driver's license and owns a vehicle * Experience working with zoning amendment process and conservation authorities * Aspire to become a BCIN designer. Benefits * Semi- Annual Bonus * Work remotely * Holiday Pay * Medical & Dental Health Benefits * Travel Allowance Position Type Full Time Duration Six (6) Month Contract (with a possibility to renew at the end of the contract) Hours Monday - Friday (10 AM - 6 PM) Job ID: 15060064
___________________
Property Pathways Inc
-
17
Job Description:Thinkpath Engineering Services is searching for a Quality Engineer to fill a direct opportunity in the Scarborough, ON area. RESPONSIBILITIES: * Assist the development, implementation and maintenance of the quality system including but not limited to completing internal/external audits and all documented procedures, forms, work instructions and other documents/records are filed and maintained/updated * Ensure the calibration system is up to date and all measuring tools and devices are maintained and in good working condition * Ensure SDS are updated annually * Responsible for quality management of incoming materials, work in-process, and finished goods * Review quality requirements and prepare quality plan for production including but not limited to work instructions, control plan, inspection sheets, FMEA/PFMEA, it could employ SPC tools * Coordinate with appropriate internal and external sources and to investigate quality concerns and recommend disposition of non-conformances and corrective actions as well as ensuring the issues are contained/repaired/dispositioned and followed up with corrective actions. * Liaise with customers, suppliers and internal personnel regarding quality and engineering matters as needed * Review of quality requirement and support costing to address quality involvement and cost * Understand common MIL specifications * Provide support to purchasing and production regarding suppliers and customer management: * * Review Supplier Approval & management criteria * Review critical customers/products * Identify critical suppliers and develop plans for mitigating risks * Assist customers with prototyping and developing their products and R & D, * Provide technical presentation as needed * Prepare KPI reports on quality * Provide quality/engineering related inputs and technical guidance to support production as needed * Communicate with customers/suppliers as required * Coordinate engineering changes with customers, Production and Quality Departments QUALIFICATIONS: * University degree in Industrial or Mechanical Engineering * 2 to 5 years of quality experience * Inter-personal skills * ISO standard and audit knowledge * Verbal and written English language skills Company Description Thinkpath Engineering Services, LLC (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; and Toronto, ON. TES provides the following engineering services: • Engineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services • CAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. • Technical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations. • Contract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries.Company Description:Thinkpath Engineering Services, LLC (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; and Toronto, ON. \\r\
\\r\
TES provides the following engineering services:\\r\
\\r\
•\\tEngineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services\\r\
\\r\
•\\tCAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. \\r\
\\r\
•\\tTechnical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations.\\r\
\\r\
•\\tContract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries. Job ID: 27585262
___________________
Thinkpath Engineering Services
-
18
Job Description:Ultrasound Sonographer required for expanding Ultrasound and X Ray clinic. Must be certified and have at least two years of experience and qualified to perform all diagnostic procedures. Kindly provide a resume with your application. Compensation is based on experience. All applications will be considered on a confidential basis. Job ID: 33832471
___________________
TORONTO QUEENSWAY ULTRASOUND & X-RAY DIAGNOSTICS LTD.
-
19
Job Description:Antalex Inc. is looking for a full time Wood Engineer/Detailer and a full time Metal Engineer/Detailer to join our team. Candidate must be fluent in English. We are specialists in designing and manufacturing custom store fixtures. Our team designs from the architectural concepts and produces detail manufacturing drawings for our millwork and metal plants. Start Date: As soon as possible Location: 170 Sharer Rd., Woodbridge, ON Education: Completion of high school, completion of College/Technical Training Program Experience: 3-5 Years * Produce detail drawings in a timely manner * Ensure the most efficient construction methods and drawing techniques are used, under the direction of the Engineering Manager * Ensure all projects meet the production and construction schedule * Ensure project is built as specified by co-ordinating with Client and Designer * Exercise initiative to obtain information required to complete drawings * Furnish project manager with drawings that are pertinent to site work * Maintain files for all drawings * Coordinating with estimating, purchasing and the shop floor * Follow project through shop to ensure correct construction Requirements: * 2+ years of Solidworks experience working with wood/metal products * Ability to create Solidworks drawings from customer specifications * Proficient in Solidworks, AutoCAD & Microsoft Office applications Company Description Looking for a place that values your experience and rewards you for your performance? At Canada's Best Store Fixtures, we are one of Canada's largest retail environment design-builders. Our career opportunities include design, engineering, metal and millwork fabricators, installers, and project managers. All employees enjoy a competitive salary and an incredible opportunity for development with experienced trainers and veteran staff who are always eager to lend their full support to new employees. Our growth is your opportunity to join a great company! Throughout our offices, wood, plastic and metal production facilities, warehouse and field execution teams we have challenging and interesting work in a variety of roles. We are always interested in meeting talented people with industry experience who would like to join a winning team.Company Description:Looking for a place that values your experience and rewards you for your performance?\\r\
\\r\
At Canada’s Best Store Fixtures, we are one of Canada’s largest retail environment design-builders. Our career opportunities include design, engineering, metal and millwork fabricators, installers, and project managers.\\r\
\\r\
All employees enjoy a competitive salary and an incredible opportunity for development with experienced trainers and veteran staff who are always eager to lend their full support to new employees.\\r\
\\r\
Our growth is your opportunity to join a great company! Throughout our offices, wood, plastic and metal production facilities, warehouse and field execution teams we have challenging and interesting work in a variety of roles. We are always interested in meeting talented people with industry experience who would like to join a winning team. Job ID: 37848816
___________________
Canada's Best Store Fixtures Inc.
-
20
Job Description:Home N Tech has been in the home automation business for over 25 years! We are a team of hard working professionals who are dedicated to quality service and take pride in getting it right for our clients If you want to be part of a successful team that excels in facing new challenges by the day, then this position is for you. We are seeking highly motivated Low Voltage Technicians to work on-site. We work on mostly new build and some retro fit projects involving all levels of home automation. Technicians would be expected to execute on all phases of a given project; Rough In, Trim, and Installation. Technicians would be on various sites day to day, and at different levels of construction. We are looking for candidates who are: * positive, self motivated and able to "think on their feet" * work independently and function well with others * complete tasks according to detailed instruction * detail oriented * punctual Aspects of the job include, but are not limited to: * Installation of low voltage cable for audio, video, security cameras, card access systems, and alarm systems. * Terminate CAT5/6 cable with RJ45 and into a patch panel * Mount and focus IP cameras * Mount and terminate alarm panels * Mount network racks and wall enclosures * Install and terminate door and window contacts * Read blueprints and drawings * Install / mount AV equipment * Documents service and installation actions by completing logs * Ability to travel and work throughout when required Working Conditions: * Mostly working at client worksites and/or active construction sites. * Ability to stand and walk for periods of time exceeding 60-minutes. * Ability to lift and carry up to 50 pounds of equipment. Qualifications: * 2-3 years experience with low voltage systems, access control, CCTV, security systems, communications * excellent communications skills and troubleshooting skills with the ability to perform advanced troubleshooting on AV systems. * posses a valid G drivers license with a clean record * Knowledge of home automation platforms (such as Crestron, Control 4) is a definite asset Compensation negotiable. We take on jobs anywhere in the GTA, currently the majority are in the Etobicoke and Mississauga area. Candidates need to be comfortable working on various sites in various stages of construction. Job ID: 19186451
___________________
Home N Tech Inc.
-
21
Job Description:We are seeking travel-ready (up to 5 days out of town) individuals who have IT systems experience to install Low Voltage and Telecommunications systems across Ontario. Successful applicants with IT system experience who are familiar with power and hand tools and are attentive to detail, accurate, and energetic. We provide on-the-job training. Full-time position, $18 - $30/hour depending on experience and learning progress during the probation period. Who we are: Cimtel Inc. 120-21 Antares Drive Ottawa, Ontario K2E 7T8 Cimtel has been a pioneer in the fields of telecommunications for over 35 years with Wireless RNA Technology focusing on the Long-Term Care and retirement living for over 20 years. Based in Ottawa, we serve customers Province-wide with the most advanced technology available including the Advance Care Nurse Call & wander prevention system with access control, integrated surveillance, and telecommunications platforms on the market. We offer our customers a complete sales, installation, training, and service portfolio for the healthcare and retirement market in Ontario. Our systems utilize a range of advanced technologies to meet the needs of the clients. Cimtel Inc. is constantly evolving and expanding using the most recent tools, techniques, methods, and technological solutions. We are growing quickly and require individuals with IT systems experience, strong communication and critical thinking abilities to perform installation, troubleshooting, and testing. We provide a company vehicle and all necessary tools. Required Skills: * Strong written and verbal communication skills. * IT systems experience, computer proficiency is MANDATORY. * Strong critical thinking and problem-solving skills. * Basic tool use; multi-meters, crimp tools, cable testers, screwdrivers, etc. * Ability to climb ladders and stand/walk for extended periods. * Experience in Electronics / CCTV / CATV / Access Control / Nurse Call & Telecommunications. Responsibilities: * Perform Telephony / Nurse Call / CCTV / Access Control / Low Voltage systems service and support calls. * Assist the project manager team lead with the installation of new systems. * Install and terminate cables; deploy and verify back-bones and end equipment. * Travel to sites across Ontario (accommodation will be provided by the company). * A company vehicle and all tools will be provided. * Professional training and on-site training will be provided. Applicants with the following Assets will be preferred: * IT systems experience with telecommunications/network wiring. * Experience with Business Telephony / CATV/ CCTV installation and maintenance. * Alarms /Access control /Low Voltage experience, i.e., maglocks, keypads, and card access will be preferred. * IT systems and computer or electronics-related skills; wiring, troubleshooting, networking, and scripting, will be preferred. Requirements: * Valid Class G driver's license * Clean criminal record * Satisfactory Driving Abstract * Physically fit, frequently climbing six-foot+ ladders. * Ability to travel and stay out of town for up to 4 nights/ week. * Ability to work extra hours. Job Types: Full-time, Permanent Salary: $18.00-$30.00 per hour Flexible Language Requirement: * French not required Schedule: * 8-hour shift * 10-hour shift * 12-hour shift * Day shift * Monday to Friday * On call rotation & after hours service and support Supplemental pay types: * Overtime pays Application question(s): * Are you fully vaccinated (3 x COVID shots)? Language: * English (Basic level is mandatory) (required) License/Certification: * Full Class G Driver's License (mandatory) (required) Willingness to travel: * Province of Ontario (required) Company Description Cimtel Inc. started in the interconnect business selling small business telephone systems back in January 1986 and is celebrating 36 years at their location at 21 Antares Drive, Ottawa, Ontario. In January 2001, Cimtel Inc. developed Wireless Resident Nurse Alert Technology Inc. ("Wireless RNA") to market to the Healthcare vertical marketplace and work hand-in-hand with Cimtel Inc. at the same location and telephone number, making this Wireless RNA's 21st year anniversary. Cimtel Inc. and Wireless RNA have established a reputation of excellence and are considered to be high-level systems integrators with the Advance Care nurse call system with Built-in RTLS Technology and all low-voltage communication systems throughout the province of Ontario focusing on Long Term Care and Retirement Homes.Company Description:Cimtel Inc. started in the interconnect business selling small business telephone systems back in January 1986 and is celebrating 36 years at their location at 21 Antares Drive, Ottawa, Ontario. In January 2001, Cimtel Inc. developed Wireless Resident Nurse Alert Technology Inc. (“Wireless RNA”) to market to the Healthcare vertical marketplace and work hand-in-hand with Cimtel Inc. at the same location and telephone number, making this Wireless RNA’s 21st year anniversary. Cimtel Inc. and Wireless RNA have established a reputation of excellence and are considered to be high-level systems integrators with the Advance Care nurse call system with Built-in RTLS Technology and all low-voltage communication systems throughout the province of Ontario focusing on Long Term Care and Retirement Homes. Job ID: 33602377
___________________
Cimtel Inc.
-
22
Job Description:Job Description We are seeking an experienced Manual Milling Machinist to start immediately in the Vaughan, ON area at one of our facilities. Applicants should be highly organized, energetic individuals and looking to work long term. Responsible for independently set up and operate a large CNC Milling Machine. Read and interpret blueprints and drawings. Ability to read and understand programs to a degree that will allow you to adjust/modify programs. Maintain tooling conditions. Verify dimensions of parts machined. Work Conditions and Physical Capabilities: Fast-paced environment Physically demanding Attention to detail. Experience: Machinist: 1 year (Preferred) Job Types: Full-time, Permanent Salary: $20.00-$30.00 per year Job ID: 38848977
___________________
Patron Career Staffing
-
23
Job Description:Canadian Executive Search Group (USA), a division of Arrow Workforce Solutions, has an immediate opening for a Quality Engineer in the Tilbury, ON area. Location: Tilbury, ON Shifts: DAY Start: Hiring Immediately Compensation: $69K-$100K BASE + Benefits PACKAGE SUMMARY: The Quality Engineer will provide internal teams with technical assistance in quality engineering, inspection/verification, and issue identification and resolution. KEY RESPONSIBILITIES: * Must provide engineering and customer support required to develop and manufacture inflatable curtain airbags for the automotive market. * Develops, applies, and maintains quality standards and protocol for processing materials into finished product. * Collaborates with other engineering and manufacturing functions to ensure q, quality standards are in place and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. * Designs or specifies inspection and testing mechanisms and equipment; performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. * Leads production team in root cause investigations and implementation of corrective actions to resolve internal and external customer quality issues. MINIMUM QUALIFICATIONS & REQUIREMENTS: * Preference will be given to candidates who have successfully completed an engineering physics, mathematics, or statistical degree at an accredited university. * Manufacturing Engineering disciplines experience preferred or career experience coupled with an Engineering Degree * A minimum of 5 years experience in industrial control systems in a manufacturing environment. * Ability to evaluate the ability of current building systems to address increased demands from plant operations. * Review equipment drawings to ensure the proposed designs satisfy the clients' requirements and comply Desired Characteristics: * Ability to work in teams that include engineers, machinists, and architects to provide technical support and services. * Attend formal professional development seminars and conferences as needed Those with experience in the below fields are encouraged to apply. * Plant Technician * maintenance mechanic * industrial control systems Engineer (ICS) * Manufacturing Engineer * Industrial Maintenance Technician Those interested are encouraged to send resumes directly to Anam@canadianexecutivesearch.com CESDH Job ID: 44060303
___________________
Canadian Executive Search Group Inc.
-
24
Job Description:We are seeking an Electrical Engineer to become an integral part of our team! The Electrical Project Engineer is responsible to provide technical support and oversight during planning, development, execution and commissioning of plant modifications. The project engineer must be knowledgeable of the technical and quality requirements and the regulatory codes and standards applicable to the discipline used in the preparation and review of work procedures. There is expectation on support project development phase by reviews during 50% and 90% design package submissions from constructability and execution standpoint. Have a strong ability to work with different work groups. It is expected the project engineer have a strong understanding of Nuclear power plant operations, including a working knowledge of the operations and maintenance components of the plant. Responsibilities: • Manages projects for safety, quality, productivity, asset reliability, process improvement, cost reduction and other business objective improvement. • Projects from initial concept and scope development through design, procurement, construction/installation and start-up. • Provides instruction in operation, set-up, maintenance, troubleshooting, repair and ensure work quality and adherence to established policies and procedures. • Utilize your background in Electrical Hardware, Automation Systems, and Process Control Systems. • Support the planning, prioritizing, and reviewing the technical plans for engineering/maintenance of the production and facility equipment including the preparation of project plans, schedules, budgets and proposals. • Establish schedules and methods for providing services; identifying resource needs; reviewing needs, allocating resources accordingly, and effectively communicating action plans/repairs. • Participate in the development of control policies and procedures and making recommendations for changes and improvements to existing standards and procedures. • Analyze and interpret all project related documents (electrical, mechanical, architectural, etc.) to accurately quantify all controls and instrumentation scope items provided in bid package. • Produce accurate control system and control panel design submittals and schedules. • Accurately quantify all material and labor requirements associated with the project. • Evaluate and review of all estimates with the Senior Engineering Manager for accuracy, value analysis and appropriate profit margin. • Manage multiple projects simultaneously and prioritize projects in accordance with deadline requirements. • Work in conjunction with Customer, Senior Engineer, Consulting Engineers, Pre-Construction and Contract Managers to prepare an accurate design proposal or schedule. Qualifications: • Efficiently plan and coordinate on-site engineering and construction activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and provided funding by performing the tasks personally or through subordinate supervisors. • Strong understanding or codes and standards • Experience with Engineering and Project Change Control Systems • Strong communication skills • Requires knowledge of physics, chemistry, metallurgy, mathematics, electricity, engineering and economics to technically understand the operation of the facility. • Requires strong technical writing skills for preparing specifications, work instructions, asset management documents, and planning documents. • Must have a demonstrated ability to prepare clear and concise reports. • Must be able to propose recommendations and resolution to technical issues both verbally and in writing. • Ability to interface effectively with Plant Operations, Plant Engineering, Maintenance, other technical staff, Regulators and other stakeholders. • Ability to interact positively with others by developing trust, mutual respect and cooperative working relationships. • Requires experience to solve problems, to provide advice and guidance, to initiate developmental studies and to make recommendations during the design, commissioning and operation of a nuclear facility; to evaluate components or materials, and to perform economic studies and evaluations associated with the design, commissioning and operation of a nuclear facility and at all times to work safely. Company Description Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario's refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team's diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their buCompany Description:Globotech provides a wide range of engineering services and solutions to the Nuclear Power Industry and is currently supporting Ontario’s refurbishment and modification projects. Globotech is committed to delivering fit for purpose solutions without compromising the Quality, Health, and Safety of our Clients. We strive to be an integrated partner and building long term relations with our clients and stake holders as our core values. Our Team’s diverse experiences and technical competency combined with projects execution experiences enables us to offer technical solutions to our clients which meet their business and project objectives. We deliver safe and quality product within Client’s schedule and cost constrains by Doing It Right the First Time. Our team of professionals is credited with in-depth knowledge of the Nuclear Industry’s regulations, standards and license requirements in Canada. Globotech’s multi-discipline organizational structure combined with cross functional experiences with CANDU technology put our firm on a prime position to offer a wide spectrum of cost-effective solutions to our clients. Job ID: 9591421
___________________
Globotech Inc.
-
25
Job Description:People Store Staffing Solutions is now hiring data entry clerks to help out with a brokerage company in the Ayr area. Job duties include fielding customer calls, inputting data, receiving and checking customs brokerage documents, preparing custom releases, tracing shipments, and other office duties and jobs as required. The ideal candidate will have experience working in a fast-paced setting, data-entry experience is an asset, team-player, attention to detail, strong typing skills, and committed to reliable ongoing work. Shifts: Monday to Friday, 8:30 am - 4:30 pm! Wage: $15.50/hr + 4% vacation pay, paid weekly! $250 signing bonus!! Job Requirements: · Experience working in a fast-paced environment (restaurant, warehousing, etc) · Experience with data-entry · Detail-oriented · Strong typist, at least 50 WPM · Able to complete a criminal record check · Team-player · You must have reliable transportation as this is not on a bus route · Committed to reliable ongoing work Duration of Role: Temporary to Permanent To apply for this role, please click the Apply Now button or submit your resume to cambridge@peoplestore.ca Company Description People Store Staffing Solutions is another company founded by John Nalli. John's journey in the staffing industry is truly a Canadian achievement. Dating back to 1995, when John joined the staffing industry right out of college. John has spent several years with large multinational companies helping to develop the Canadian market. With a string of accomplishments under his belt, including 9 years of industry experience and a track record of success, John felt it was time for a new challenge. With all the rapid changes affecting the industry, John noticed the degradation of values within the industry from which he had built his experience. Thinking that this was enough, he decided to reintroduce quality in the industry. He didn't know it at the time - but that quality standard later became PQAP (People Store Quality Assurance Program). With the encouragement of a close friend and already successful entrepreneur, Frank Cianciulli, John decided to go it alone and create a new kind of recruiting firm. In 2003, John designed his business plan and started the business from his kitchen table. With just an idea, a dream and a ton of ambition, John started one of the most successful staffing companies to ever reach the Canadian market.Company Description:People Store Staffing Solutions is another company founded by John Nalli. John's journey in the staffing industry is truly a Canadian achievement. Dating back to 1995, when John joined the staffing industry right out of college. \\r\
\\r\
John has spent several years with large multinational companies helping to develop the Canadian market. With a string of accomplishments under his belt, including 9 years of industry experience and a track record of success, John felt it was time for a new challenge.\\r\
\\r\
With all the rapid changes affecting the industry, John noticed the degradation of values within the industry from which he had built his experience. Thinking that this was enough, he decided to reintroduce quality in the industry. He didn't know it at the time - but that quality standard later became PQAP (People Store Quality Assurance Program).\\r\
\\r\
With the encouragement of a close friend and already successful entrepreneur, Frank Cianciulli, John decided to go it alone and create a new kind of recruiting firm. In 2003, John designed his business plan and started the business from his kitchen table. With just an idea, a dream and a ton of ambition, John started one of the most successful staffing companies to ever reach the Canadian market. Job ID: 1097081
___________________
People Store
-
26
Job Description:* Maintain and grow sales relationships with existing clients * Identify and solicit potential clients * Assess clients' needs, recommend or assist in the selection of appropriate goods or services, and negotiate prices or other sales terms * Provide input into product design where goods or services must be tailored to suit clients' needs * Develop sales presentations, proposals, or other materials to illustrate benefits from use of good or service * Estimate costs of installing and maintaining equipment or service * Prepare and administer sales contracts and maintain customer records * Consult with clients after sale to resolve problems and to provide ongoing support * Troubleshoot technical problems related to products * Develop and maintain technical product or service knowledge to explain features to clients and answer questions about goods or services * Develop, implement and report on sales strategies to achieve business goals * Assess market conditions and competitors' activities and develop an awareness of emerging markets and trends * May offer training in the operation and maintenance of equipment * May supervise the activities of other technical staff and sales specialists. Job ID: 21358507
___________________
Banas Stones Inc.
-
27
Job Description:Ultrasound Sonographer required for expanding Ultrasound and X Ray clinic. Must be certified and have at least two years of experience and qualified to perform all diagnostic procedures. Kindly provide a resume with your application. Compensation is based on experience. All applications will be considered on a confidential basis. Job ID: 33832471
___________________
TORONTO QUEENSWAY ULTRASOUND & X-RAY DIAGNOSTICS LTD.
-
28
Job Description:Lakeland Manufacturing is seeking a CNC Programmer with experience programming 3- CNC mills and 2 axis lathes. You will develop new CNC programs for custom parts and production runs or modify existing programs for different machines. During the manufacturing process, you will perform quality checks with the machine operator to ensure the program is producing parts according to specifications, making manual adjustments if necessary. You will also work with the engineers to look for product modifications that might reduce the amount of material or fabrication time. Although no formal education is required, applicants should be familiar with the computer-aided design programs Mastercam. CNC Programmer Duties and Responsibilities * Develop CNC programs for production runs * Analyze drawings to determine dimensions and to choose cutting tools, machine speeds, and feed rates * Modify existing programs for different machines * Maintain tooling database * Make manual program adjustments as necessary * Troubleshoot issues during the manufacturing process CNC Programmer Requirements and Qualifications * High school diploma * Completion of a technical or associate degree program a plus * Experience programming 3- CNC mills and 2 axis lathes * Familiarity with Mastercam * Basic math skills Company Description Through more than 30 years as a leading supplier of precision-machined parts, components, and assemblies, Lakeland Manufacturing enjoys a global reputation for superb professional standards and innovative, customer-driven services. We provide a full complement of in-house design and production facilities, from ideas and brainstorming to design, sourcing and manufacturing. Our expertise is working with the customer's vision and applying our state-of-the-art processes and techniques. The result is high-quality, effective and reliable components, efficiently produced to meet strict budget and deadline targets.Company Description:Through more than 30 years as a leading supplier of precision-machined parts, components, and assemblies, Lakeland Manufacturing enjoys a global reputation for superb professional standards and innovative, customer-driven services. We provide a full complement of in-house design and production facilities, from ideas and brainstorming to design, sourcing and manufacturing. Our expertise is working with the customer’s vision and applying our state-of-the-art processes and techniques. The result is high-quality, effective and reliable components, efficiently produced to meet strict budget and deadline targets. Job ID: 6738162
___________________
Lakeland Mfg
-
29
Job Description:We are seeking a Full Stack Software Developer to join our team. As a member of our development team, you will work closely with other developers, project managers, and clients to create custom software solutions that meet the needs of our clients as well as develop and maintain our SaaS products. You will be responsible for the entire software development life cycle, from ideation to deployment and maintenance. Key Responsibilities: * Collaborate with other developers, project managers, and clients to gather requirements, plan projects, and execute on deliverables * Write clean, well-documented, and maintainable code using modern programming languages and frameworks * Design and implement front-end and back-end components of custom software solutions and SaaS products * Develop, test, and deploy software on a regular basis * Participate in code reviews and provide constructive feedback to other developers * Maintain and improve existing software applications and SaaS products * Stay up-to-date with emerging trends and technologies in software development and apply them to our projects Qualifications: * Bachelor's degree in Computer Science or related field * 3+ years of experience in full-stack software development * Experience with programming languages such as PHP and JavaScript * Familiarity with front-end and back-end frameworks * React, Angular, Vue, and Laravel are a plus * Experience with SQL and NoSQL databases * Familiarity with cloud-based services such as AWS or Azure * Excellent communication skills and ability to work in a team environment If you are a self-motivated, creative problem solver who is passionate about delivering high-quality software solutions we encourage you to apply for this exciting opportunity. Company Description Sequoia Software is a small but growing software development firm that creates custom software solutions for clients in addition to developing our own software as a service (SaaS) products. We are passionate about delivering high-quality, reliable software that meets the unique needs of each of our clients. We pride ourselves on our ability to work collaboratively, adapt quickly to changing requirements, and innovate rapidly.Company Description:Sequoia Software is a small but growing software development firm that creates custom software solutions for clients in addition to developing our own software as a service (SaaS) products. We are passionate about delivering high-quality, reliable software that meets the unique needs of each of our clients. We pride ourselves on our ability to work collaboratively, adapt quickly to changing requirements, and innovate rapidly. Job ID: 21429349
___________________
Sequoia Software
-
30
Job Description:Working together with your Engineering manager and team, you will support new clients and projects in existing markets as well as new emerging industries. Your strong work ethics and deep technical knowledge will help our clients add value to their projects and bring them to fruition. You will add value by working hand in hand with our in house team which consists of Engineering, Marketing, Accounts, Administration and Logistics which in turn works with our overseas partners to provide our clients with the manufacturing foundation that Kingstec is well known for. Responsibilities and Duties * Manage Client projects, answer day to day inquiries and assist with other clients requirements; * Work with Marketing department to answer technical inquiries from clients and from suppliers; * Respond and handle customer quality complaints; * Propose options and solutions for your manager's consideration in solving technical problems; * Attend tradeshows and answer inquiries from potential clients; * Prepare quotations and participate in order/contract negotiation and after sale service; * Check and manage in-coming purchase orders for secured projects; * Prepare, send and follow up on purchase orders to suppliers for projects you manage and; * Prepare adhoc summaries for management regarding your projects. Qualifications and Skills * Diploma/degree in Electrical/Electronic Engineering; * Strong working knowledge/experience in PCBA manufacturing; * Travel within North America, Europe and Asia; * A minimum of 2 years working experience in a manufacturing environment (Preferably in Hong Kong/China); * Strong communications, coordination and project management skills; * Ability to work in an organized and self-motivated manner and; * Fluency in English, Cantonese and/or Mandarin Benefits * Group Benefits including medical, dental, vision and life insurance * Bonus opportunity twice a year * Paid vacation from 2 to 4 week depending on years of services Job Type: Full-time Experience: * manufacturing working: 2 years (Required) Education: * Bachelor's Degree (Required) Location: * Mississauga, ON (Preferred) Licence: * Driving Licence (Required) Language: * English, Cantonese and/or Mandarin (Required) Company Description Kingstec is a one-stop engineering, manufacturing and logistics, business partner. Kingstec offers complete solutions to project management, engineering, manufacturing and logistical challenges. We have managed over 5,000 successful projects for our clients over the past 35+ years, delivering quality products at the right time, right quantity and the right price.Company Description:Kingstec is a one-stop engineering, manufacturing and logistics, business partner.\\r\
Kingstec offers complete solutions to project management, engineering, manufacturing and logistical challenges. We have managed over 5,000 successful projects for our clients over the past 35+ years, delivering quality products at the right time, right quantity and the right price. Job ID: 2106120
___________________
Kingstec Technologies Inc
-
31
Job Description:Qualifications and Skills: · Completion of an accredited post-graduate Medical Radiation Technologist Programme (MRT) or equivalent · Active member of CMRTO (College of Medical Radiation Technologists of Ontario) · CAR certification for Mammography is an asset and/or OAR certification for Bone Miner Densitometry is an asset · A minimum of 2 years of experience is preferred · Certification in WHMIS, AODA, BLS, and/or other will be requested at time of interview · Proof of professional liability insurance required · Evidence of ongoing continuing education to expand current skill set · Ability to work in full dicom environment for all diagnostic imaging modalities · Competent computer skills, including proficiency in RIS and PACS applications · Excellent interpersonal, communication and organizational skills as well as the ability to work independently · Commitment to work with and member of BDI D.I. team · Compliance with Public Health Ontario related policies, health and safety legislation and best practices and completing relevant mandatory education as required · Proficiency in a 2nd language other than English an asset Duties: · More information will be provided during the interview dependent on skill set; i.e. radiography, mammography and/or BMD · Exemplary interpersonal, verbal and written communication, organization and time management skills are required · Perform independently within team environment with close liaison with specialty team of Radiologists and peers · Flexibility with hours to accommodate clinic hours of operation Company Description Barclay Diagnostic Imaging (BDI), which is located at 589 Lake Street, St. Catharines, provides diagnostic imaging services to the St. Catharines, Beamsville, Thorold and Greater Niagara community. Our clinic offers services in X-Ray, Mammography, Bone Mineral Density, and in both General and Vascular Ultrasound. BDI is also proud to be a centre affiliated with the Ontario Breast Screening Program (OBSP). Our primary hours of operation are Monday to Saturday. The BDI team includes hospital-based Radiologists with subspecialties in various disciples of diagnostic imaging. Our health team works diligently to provide high quality service within an environment focused on exemplary patient care. BDI prides itself on our teamwork, competency, quality of imaging and values that support mutual respect for both staff, patients and referring practices. The MRT pay rate is commensurate with D.I. experience. The position does offer some flexibility in hours to accommodate the successful candidate.Company Description:Barclay Diagnostic Imaging (BDI), which is located at 589 Lake Street, St. Catharines, provides diagnostic imaging services to the St. Catharines, Beamsville, Thorold and Greater Niagara community. Our clinic offers services in X-Ray, Mammography, Bone Mineral Density, and in both General and Vascular Ultrasound. BDI is also proud to be a centre affiliated with the Ontario Breast Screening Program (OBSP). Our primary hours of operation are Monday to Saturday.\\r\
\\r\
The BDI team includes hospital-based Radiologists with subspecialties in various disciples of diagnostic imaging. Our health team works diligently to provide high quality service within an environment focused on exemplary patient care. BDI prides itself on our teamwork, competency, quality of imaging and values that support mutual respect for both staff, patients and referring practices. The MRT pay rate is commensurate with D.I. experience. The position does offer some flexibility in hours to accommodate the successful candidate. Job ID: 28917770
___________________
Barclay Imaging
-
32
Job Description:Thinkpath Engineering Services is recruiting for an Electrical Engineer to fill a permanent opportunity with a client located in Bowmanville, Ontario. Duties and Responsibilities: * Preparation of drawings for control panels for equipment used in material handling * Design of new machine control systems including specifications and selection of remote sensors * PLC and Microcontroller programming * Complete development of new HMI from conception thru to production drawings * Troubleshooting (by phone) electrical related problems with both new and existing installations Requirements: * Applicant must be an electrical engineer or equivalent * Comprehensive understanding of industrial and commercial electrical systems * Previous industrial controls design experience (relay logic, PLC and microcontroller based) * Controls programming experience (PLC - ladder logic; Microcontroller - C/C++, Python, (ASM is not a requirement but would be a definite asset) * Proficient in AutoCAD 2010, Microsoft Office 2010 * Excellent English communication skills (oral and written) Company Description Thinkpath Engineering Services, LLC (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; and Toronto, ON. TES provides the following engineering services: • Engineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services • CAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. • Technical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations. • Contract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries.Company Description:Thinkpath Engineering Services, LLC (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; and Toronto, ON. \\r\
\\r\
TES provides the following engineering services:\\r\
\\r\
•\\tEngineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services\\r\
\\r\
•\\tCAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. \\r\
\\r\
•\\tTechnical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations.\\r\
\\r\
•\\tContract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries. Job ID: 26365986
___________________
Thinkpath Engineering Services