Cars & vehicles, Heavy equipment with in Canada, British Columbia, Peace River Country.
-
1
2023 Isuzu NRR - Diesel ,Auto - 176 " wb
Suspension Seat, Touch screen Audio , Def Fill , locking Def tank Led lighting Package ,heated mirrors , Back up Alarm
023 Vanguard Dry Van EV Body installed on Izuzu NRR Interior length - 20 ft Interior Height - 97 " Interior Width - 100.25 inchs SS raduis corners , SS rear door frame , Hardwood floor , LED lighting Approx 900lbs lighter than a comparable competitors dry van Note:
This unit can be raised& have a tuck away lift gate installed
.
-
2
2014 Freightliner 114SD tandem
Water Truck .
*** DOES NOT RUN **** NEEDS ENGINE WORK****
deleted Detroit DD13 , Engine Brake, New Espar cab and Engine heater. Allison
AUTOMATIC Trans , Diff Locks, 16000 lb Front Axle,
46000 lb Rear , Air Ride Cab, 385/65R22.5 Front Tires,
11R24.5 Rear Tires, Airliner Air Ride Suspension, 235 in Wheelbase, 2013 Jasper 16700 L Steel Tank, Catwalk w/Guardrails, Bowie Hydraulic Driven Pump, isolation valves on rear discharge spoons , great for ice roads.
Will have more pics soon.
-
3
2006 W900 tandem, 244” wheelbase, 72” hi rise sleeper with couch and bunk bed, cm870 cumins, wet kit, moose bumper, 3.90 gear ratio, really nice driving truck
1-250-261-8574
-
4
John Deere genset, rebuilt engine great runner ready to plumb in , gauge box needs a cover, on skid with large fuel tank on side
-
5
Western Canada and the northern U.S. energy sector are heating up fast. LNG expansion, pipeline development, export growth, rising oil prices, and strong natural gas demand are pushing drilling, hauling, and infrastructure activity higher across the board.
Smart operators are securing dependable equipment now before the next major push fully hits.
At the same time, 2027 emissions regulations are bringing even more DEF systems, sensors, electronics, downtime risks, and repair costs into newer trucks. Many experienced operators are moving back toward proven pre-emissions platforms that are simpler, tougher, easier to maintain, and built to stay working when the job needs to get done.
This is the kind of truck serious operators look for:
• proven platform
• no DEF system
• no emissions downtime headaches
• no constant sensor issues
• built for real-world oilfield and heavy-haul work
• dependable, field-proven equipment
Good clean pre-emissions trucks are getting harder to find every year, especially reliable units ready to work immediately.
If you understand where the oilfield, LNG, pipeline, and hauling markets are heading over the next several years, then you already understand why trucks like this are becoming more valuable.
Serious buyers only • Fort St. John
Ready for oilfield work – Fort St. John area.
ENGINE / DRIVETRAIN
CAT C15 6NZ (475 HP) — Caterpillar OPT dealer overhaul done Mar 1 2013 (Finning/Calgary Peterbilt) (documented, no current warranty)
Since rebuild: ≈ 7 100 hrs | ≈ 434 700 km (documented)
Totals: ≈ 36 606 hrs | ≈ 1 129 000 km
Eaton 18-Speed RTLO | 4.33 ratio
Axles: Front 16 000 lb / Rears 46 000 lb • Double frame • 244″ wheelbase
No DEF • No derate • Winter-ready • Proven Alberta history, now Fort St John BC
HYDRAULICS / WINCH
Universal hydraulic system — runs lowbed, side dump, end dump, walking-floor or tanker.
DP-45 20-ton hydraulic winch (tag on unit) • 80 L tank • external cooler + manual ON/OFF fan for continuous use.
Rear hose / electrical mast keeps lines off the deck for clean safe operation.
⚙️ MAJOR RECENT WORK (Front → Back)
Clutch • flywheel • trans • output yoke NEW • Driveline U-joints + steady bearing NEW • Air Trac rebuilt (new bags, shocks, leafs, tie-rods, laser-aligned) • Front spring hangers NEW • Steering column + bearings NEW • Cooling: radiator flushed, DuraLite CAC, NEW Horton fan clutch + fan • Electrical/Fuel: NEW 200 A alternator (+ spare), rebuilt starter (+ spare), NEW batteries + fuel pump, primer pump replaced • Heat/AC: complete A/C replacement, new heater cores + fans (spare cab fan) • Top end: valves set, strong Jake, injectors ≈ 6 mo before parked • Frame + winch repainted • NEW winch line, sling & skid ears
FLUIDS / FILTERS
Engine oil + filter ≈ 150 hrs left • Transmission oil NEW • Differentials NEW • Power steering fluid NEW (+ filter) • Hydraulic tank premium all-season oil (winter-ready) • Fuel + air filters NEW
TIRES / BRAKES / WHEELS
Steers 100 % virgin • Drives ≈ 90 % virgin • Brakes ≈ 90 % + • All-aluminum wheels (4 brand-new outers, zero road time)
️ INTERIOR / POWER / HEAT-TRACE
Clarion Bluetooth stereo + speakers • Dash cam • ICOM 99-ch radio • New driver’s seat • Red interior kit (seat covers, rugs, bedding new) • Webasto cab + engine heaters • Eliminator 2000 W inverter • Heated coolant line to rear (heat trace) for warming tankers, toolboxes or winch oil tank • Cab kept clean — no boots inside.
SPARE PARTS BAY
1 rebuilt starter • 1 new alternator • Spare cab fan • Belts, hoses, fittings, clamps • Extra oil + fuel filters • Tie-downs + cinches • Chains (26 triples + 4 steer) • CAT engine code book + manuals • Assorted spare tires + rims (see video)
PAPERWORK / PROOF
Caterpillar OPT overhaul docs (Finning/Calgary Peterbilt) • Engine serial 6NZ70998 • VIN 597759 • Owner service records + receipts on hand.
LOCATION / TERMS
Fort St. John BC • As-is, where-is • Clear title • No trades • No delivery
Reason for sale: retiring from trucking. I drove it like a workhorse, not a race car. Turn-key and field-ready.
VIDEOS / DOCS
Album https://pdf.ac/2HCYqJ
• Spare parts https://youtu.be/U-omoAENZ-c
• Running https://youtu.be/XPDO0xzUVYQ
• Walkaround https://www.youtube.com/watch?v=5khJ1kzmxF8
• Short https://www.youtube.com/shorts/JiqQC_7cCmM
• Spec https://drive.google.com/file/d/1RAx91f-_i2J9T3hP9P8Vr4M30kpnn0jD/view
• CAT OPT https://drive.google.com/file/d/1iDGGq4qv0MMei4PB89GlDHs4vpe-w1Wn/view?usp=sharing
Maintenance Record:
https://drive.google.com/file/d/1g2RORyvGXTyGCqS5CQEIL4XTvXWuqY_m/view?usp=sharing
PRICE / $165 000 FIR
Contact Roy — 250-305-9490 • royhalls@cyandc.com
Financing may be available through a third-party lender. Ask for details.
-
6
2018 T300 Kenworth 6x4 Rollback truck
200,675 kms
12507.8 hrs
Paccar L9 6 Cylinder 8.9 L Diesel (Not deleted)
Allison Automatic Transmission
Century Rollback Body28 ft x 102
Warn 20000 lb Winch
Fresh cvip done in June
If you have any questions or offers, let me know
-
7
# ALLTRAC HEAVY EQUIPMENT LIQUIDATION
## RETIREMENT RELOCATION SALE – EVERYTHING MUST GO
### Excavator Attachments • Demolition Equipment • Quarry Equipment • Specialty Attachments
After more than 50 years in the excavation, demolition, trucking, and heavy civil construction industry, we are reducing inventory and liquidating a large selection of premium excavator attachments and specialty equipment.
This is a true liquidation sale — not a dealer inventory reduction.
Many items are new, demo units, dealer take-offs, or difficult-to-find specialty attachments.
---
## LOCATION
Cambridge Narrows, New Brunswick, Canada
### Shipping Available Throughout:
• Canada
• United States
# DEMOLITION & STRUCTURAL ATTACHMENTS
### PWE High Reach Demolition Stick
• 50 Foot Reach
• Fits 50-75 Ton Excavators
• Two-Piece Design
### Price: $20,000 CAD
### HYDRARAM XTRACTOR Sheet Pile Driver / Extractor
• New
• 400-750 Class Excavators
• Drives and Extracts Sheet Piles and Round Piles
### Replacement Cost: Over $200,000 CAD
### Sale Price: $50,000 CAD
### Jewel Manufacturing Telescopic Swivel Boom
• Fits Hitachi & John Deere Excavators
• 400-490 Class
Price: $10,000 CAD
# HYDRAULIC HAMMERS & BREAKERS
### TERMINATOR TX750 Hydraulic Drop Hammer
• 75,000 FT-LB Impact Energy
• Fits 450-800 Class Excavators
### Price: $40,000 CAD
See Full Ad:
https://www.alltrac.co
### 2024 OKADA Hydraulic Breaker
• Factory Rebuilt
• 7,500 FT-LB Impact Energy
• Fits 250-450 Class Excavators
### Price: $40,000 CAD
### Stanley MB100EX / MBX608 Chisels
• Multiple New Units Available
### Price: $1,000 CAD Each
# LAND CLEARING & STUMP REMOVAL
### Slashbuster SG360 Excavator Stump Grinder
• Fits 16-40 Ton Excavators
### Price: $30,000 CAD
### Rockwheel Twin Drum Stump Grinder
• 95 HP Hydraulic Drive
### Price: $20,000 CAD
# CRUSHER BUCKETS & EXTREME-DUTY BUCKETS
### Xcentric XC50 Crusher Bucket
• Fits 400-650 Class Excavators
• Production Capacity Exceeding 100 Cubic Yards Per Hour
• Replaces Mobile Crushing Plants
### Price: $70,000 CAD
Full Product Information: https://xcentricripper.com/products/xcentric-crusher-bucket/xcentric-crusher-benefits/
### Hensley 30" Extreme Duty V-Ripper Bucket
### Available
### 5 Yard Extreme Duty V-Bucket
• 400-750 Class Excavators
• Like New
### CP Four-Shank Extreme Duty Ripper Bucket
• 200-240 Class
### ESCO Extreme Duty Trenching & Ripping Buckets
• 24"
• 48"
• Multiple Units Available
### ESCO Trenching & Ripping Bucket
• 350-490 Class
### Hensley HPX Extreme Duty Buckets
• Multiple Sizes Available
### Frost / Shale / Rock Ripper Buckets
• 300 - 400 - 550 Class
• Multiple Units Available
### Fleco & WBM Heavy Duty Buckets NEW OR AS NEW
• 250-400 Class
### MP MacFrey AR400 V-Ditch Bucket
• 2.5 Yard Capacity ---
# GRAPPLES & MULTI-FUNCTION BUCKETS
### XHAND 60" Six-In-One Grapple Bucket
Functions Include:
• Cleanup Bucket
• Screener Bucket
• Dual Grapples
• Material Handling
• Sorting
### New Unit ### Price: $15,000 CAD NEW COST $60.000.00
### Tysea Demolition / Mat Grapple
• 60"
• Fits 200-350 Class Excavators
• New – Never Used
### Replacement Cost: Approximately $80,000 CAD ### Sale Price: $30,000 CAD
---
# MIXING & MATERIAL PROCESSING EQUIPMENT
### ALLU PM200 Rotary Drum Mixer
• Fits 200-350 Class Excavators
### Hydraulic Rotary Mixers
• Three Units Available
• 200-350 Class
### Starting at $20,000 CAD
# COMPACTION EQUIPMENT
### Stanley HS2000 Plate Compactor / Driver
• 20,000 FT-LB ### Price: $6,000 CAD
### Felco / NPK Vibratory Compaction Bucket
• 1.5 Yard Capacity
### Price: $12,500 CAD NEW CODT $45,000.00 USD
# COUPLERS & LOADER ATTACHMENTS
### ACS Quick Coupler with 4-In-1 Loader Bucket
Fits John Deere 644 Wheel Loader
# SUPPORT EQUIPMENT
### Crosby Load-Rated Swivel Chains
### 24 Volt Forklift Battery Charger
### Norzon III Rail Cut-Off Wheels
### Various Shop & Support Equipment
---
# WHY THIS SALE IS DIFFERENT
✔ Retirement Relocation Sale
✔ Many New or Demo Units
✔ Equipment Maintained and Work Ready
✔ No Dealer Markups
✔ Immediate Availability
✔ Hard-to-Find Specialty Equipment
✔ Significant Savings Compared to New
---
# LOADING & SHIPPING
✔ 12,000 LB Four-Wheel Drive Forklift On Site
✔ We Load Trucks & Containers
✔ Freight Quotes Available
✔ Buyer Carriers Welcome
# PICKUP LOCATION
1921 Lakeview Road Cambridge Narrows, New Brunswick E4C 1N1 Canada
# CONTACT FRANK RAYNER
Call / Text / WhatsApp 604-476-7777
Toll Free: 1-833-693-9323
Website: https://www.alltrac.co
### PLEASE SEE OUR OTHER EQUIPMENT LISTINGS
Hydraulic Hammers
Crusher Buckets
Pile Drivers
High Reach Demolition Equipment
Excavator Booms & Sticks
Ripper Systems
Grapples
Mixers
Compaction Equipment
Specialty Excavator Attachments
---
⚠️ IF THE AD IS LIVE, THE EQUIPMENT IS AVAILABLE
⚠️ PLEASE NO "IS THIS STILL AVAILABLE?" MESSAGES
⚠️ SERIOUS BUYERS ONLY
-
8
EGR cooler for Detroit DD16. We got for a spare never used. Do not need any more still has plastic on it. Just opened spot to get number for a picture
EGR cooler for Detroit DD16 Never used
-
9
1997 Kenworth T300 with Tree Spade. Cummins eng, 7148 hours, air brakes, air ride suspension, 11R - 22.5 tires. Great little truck. Everything runs and works as it should.
-
10
Selling my western star truck.
Just had an inspection done and it runs without any problems.
It has 1500 hours and 105000km.
It’s a spacious truck and has a bed in the truck so it’s great for long work trips.
It also has a bed, a wet kit, 604 hp, and a cummins motor.
-
11
2016 Westech Build
192273KM
13248 Engine hours
New Transmission
New PTO/Rebuilt Hydraulic pump
New Pressure washer pump
New Tank Hoisting ram
Will come with Fresh CVIP + Tank Inspections (Full)
Very good unit, Upgrading to new vac is reason for selling
-
12
Looking to Grow Your Business with the Right Equipment?
At EquipEASE, we specialize in flexible financing solutions for business owners and aspiring Owner Operators who need equipment to power their operations. Whether you're eyeing new or used equipment, keep your cash flow intact with our commercial lease-to-own financing options.
✅ Pay as You Profit: Use the equipment while paying it down, and own it outright at the end of the term.
✅ Full Tax Write-Off: Take advantage of CRA benefits while building equity.
✅ Early Buyout Options: Gain ownership sooner if it works for you.
✅ No Usage Limits: Work hard without worrying about restrictions.
We make financing simple, whether you're buying from private sellers, auctions, or dealers (conditions apply). Plus, we cater to both new and established businesses with personalized solutions tailored to your needs.
If you value experienced financing with clear communication, contact me today to discuss how we can help you grow your business:
Call or Text: Kyle at 403-370-3375
Email: kyle@equipease.ca
Learn More: equipease.ca
Don’t wait—secure your equipment and grow your business with ease!
Helping Canadians from coast to coast to coast.
-
13
Nice clean 2015 machine in very good condition.Machine has thumb, blade, and quick attach connection for buckets. Comes with 3 buckets 2 new and 1 bucket is used but in like new condition.Is in excellent condition air-conditioned cab with quick attached hydraulic bucket installer ,blade and rear view camera. Weight approx 16 ton.This is an excellent machine
-
14
I am selling a Weidemann 9580T, a robust and versatile piece of machinery designed for heavy-duty tasks, this loader is in used condition and ready to tackle your toughest jobs.
Here are some of the key features:
* High lifting capacity
* Powerful engine
* Telescopic arm for extended reach
* All-wheel drive.
3400 hours.
Just doesn't fit my operation.
-
15
2015 Komatsu PC138US Excavator – Ready to Work
• Approx. weight: 16 ton
• Machine is in very good operating condition
• Tight, smooth hydraulics
• Starts and runs strong
Features:
• Hydraulic thumb
• Blade
• Quick coupler (Miller)
• A/C cab
• Rear view camera
Attachments:
• 3 buckets included
• 2 new
• 1 like-new condition
Condition:
• Well maintained
• No known issues
• Clean machine, ready for job site
Additional Info:
• Located in Oak Bay, NB
• Can assist with loading
Contact for more details, hours, or to view
Email: Coastals@nbnet.nb.ca
Call : 506-466-4656
Call : 506-467-7000
Text : 506-466-0000
-
16
JD POWER TECH PLUS 6090. ENGINE 9.0L 250 HP (upgrated). Automated frame Oscillation. FRT and REAR DIFF LOCKS. CF8 BOOM w/max 27' 9"ext length. SLEWING ANGLE at 38 dergee. CABIN ROTATING at 290 degree. 750/55R 26.5 tires w/dbl wh tracks on both cab and trailer (now removed and stacked on rear). Total capacity 55,225 lb. CF 885 BOOM w/5709 lb capacity. Grapple performs well all functions. 19,070 hrs. Runs/operates very well. Located in Edmonton, AB.
$224,500 Reduced to $151,900. Cash/ trade/ lease to own terms.
Phone 780-485-0900.
More pictures at www.valbrigequip.com
AMVIC Licensed Business.
-
17
Selling our 2014 lazer tank 44m³
2 separate compartments
4.5 t&E new pump with upgraded hydraulic motor..
Bought this tralier last year form Edmonton trailers..
have 2 of them so 1 needs to go for more info call or text 250.263.7718
-
18
IF INTERESTED OR ANY QUESTIONS PLEASE REPLY ONLY TO prtruckandtrailer@gmail.com (do not reply via kijiji chat).
2019 PETERBILT 389.
X15 565 HP / 1850 TORQUE (DELETED).
18 SPEED EATON RTLO18918B18.
DANA SPICER 13,200 LB FRONT.
DANA SPICER D40-170 40,000 LB REAR ENDS (SUPER 40’s).
3:73 RATIO.
846,000 KMS (17,720 HRS).
FRESH IN FRAME @ 815,000 KMS (16,580 HRS)(paperwork can be provided).
FRESH CVIP
72" ULTRACAB SLEEPER W/PLATINUM TRIM (MICROWAVE, INVERTER).
MOOSE HERD BUMPER.
TRUCK IS ALSO RIGGED WITH SPRAY ARC HYDRAULICS TO TANK AND END/SIDE DUMP.
Price reduction $133,000 + TAX OBO
-
19
2015 Combo vac for sale
T800 Cummins 565 HP 1850 TQ.
Operated and maintained by owner
CAMEX Rig up
Blower Boss 8.2 Upgraded Version Installed around 13000 Hr. Meter
Installed New ( not rebuilt )Turbo less than a year ago.
Hitch and all hookups for pup
Heavy Duty HF25 Pratissoli wash pump fully rebuild, comes with spare rebuild kit.
Boiler 3/4” coil 750,000 BTU
Full service has been done @ every 300 hours and extra greasing service in between.
Installed new wash pump hose cox reels and new motors After 19627 Hr. Meter
New candy cane installed into tank before getting New liner into tank After 19265 Hr. Meter
Installed new heavy duty transmission and
Rebuilt all PTOs when installing new transmission after 18356 Hr. Meter
Full DEF Delete kit and new tune Installed at 18961Hr.
Fully rebuilt wash pump, comes with new rebuilt kit After 18691 Hr. meter
All inspections are up to date VIPTK, CVIP, HOSES,
The lucky buyer gets working Tools, hoses, included
Ready to go to work!
Still operating daily until sold
Tires are about 78%
Please feel free to ask any questions or additional information!
-
20
We are looking for a Mack midliner or Volvo cab over parts. We are after the cab. Will look at a whole truck, doesn’t have to run.
Call or text John at 2507195348
-
21
TNT Attachments
780-591-5199
Excavator Attachments
Top quality Design Strength & Performance
We build
Excavator =
Wrist/tilt buckets
Chuck blades
Cleanup and digging buckets
Skeleton buckets
Frost buckets
V buckets
Brush rakes
Root rakes
Scoop rakes
Trenching spoons
Ripper shanks
Stump rippers
Fence rollers
Gravel spoons
Bolt on top mounts
Blank ears / lugging
Matt grapples
Auger hangers
Pallet forks
Excavator to skidsteer adaptors
And much much more
Skidsteer =
Snow pushers
Snow Buckets
Tooth & smooth buckets
Mat grapple
Adapter plates
Fence rollers
Gravel spoons
And much morePlease feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know we do package deal pricing!
Warranty on all new attachments
We ship Canada wide
Tags:
Wrist bucket tilt bucket ripper shank digging bucket clean up bucket brush rake root rake Chuck blade pallet forks mini excavator caterpillar John Deere case komatsu hitachi yanmar sany bobcat
-
22
2017 Freightliner Altec AN67 E100 Bucket Truck
- 2 man bucket
- Cummins 8.9L diesel
- Non overcenter
- Automatic
- 105 foot working height
- 42,000 miles(905) 375 3554 for questions and inquiries! Serious inquiries only! Text or Call!
-
23
2012 Case 580 N Backhoe for sale. 2800 hours. Runs good has buckets and snow plow blade.
-
24
2022 Kubota SCL 1000 skid steer. Amazing little machine for landscaping, fencing, driveways, concrete and hardscape prep and so much more. Have owned since new and has been an owner operator machine, extremely well kept and serviced. Controls are very user friendly with T handle steering and a single joystick for all boom and bucket functions. Comes with all the attachments shown in pictures and is plumbed with auxillary hydraulics for whatever needs to be hooked up. Machine has only 389 hrs, it is in mint condition and is as close to new as you will find.
Attachments and measurements are as listed:
Machine width is 36”
All buckets and forks are kubota brand.
36” wide smaller smooth edge bucket
36” wide smaller tooth bucket
48” wide smooth edge bucket with high back
48” wide tooth bucket with high back( never been used)
Pallet forks
John Deere PA30B auger with welded on mounting plate to fit this machine
12” and 8” Eterra auger bits with hex shank
-
25
Case 9120 in good condition
Duals
small tube rotor
Magna cut chopper with just over one season on new blades
Used for forage seed and lower through-put crops so wear low for the number of hours showing
2584 separator hours, 3852 engine hours
Air compressor
Bubble up auger replaced at start of grain harvest
Pro 600 display and nav II controller
Hopper extensions and extender on unload auger for 40 ft header
Comes with 2010 case 2016 16" swathmaster pickup header
Harvest services feeder chain
Open to any offers. Delivery may be included for the right buyers.
Contact Tobin 25O-26I-8358
-
26
D8 basket rake with skid
-
27
2010 Case 420 Series 3. Just over 2000 hrs on unit. Dash shows 240 hrs now but the dash was replaced at 1800 hrs. For more info or to see the unit call 250 263-2253
-
28
Agt H13r mini excavator new. Full cab ready to go. Plumbing installed for thumb or other attachment
Call or text 250-794-6551 located in fort St. John
-
29
2007 565 Cummins 500,000+ km
Can be heard running before removal
Good running conditionFor more info call 250-794-1444
-
30
2024 Titan 35' Tridem End Dump
..........In Stock Now..........- Polished Panels
- Alum Wheels
- Electric Mesh Tarp
- LED Lights
- Floor LinerPlease Contact
Chris Davidchuk
780-732-4337Financing Options Available
-
31
New Holland Power star T4.75 Ford Tractor. Comes with Bucket and bale forks. MINT condition, low hours - light use
-
32
open for offers
2'680 hours, new tires, DEF deleted, SCR in muffler replaced by baffles, 419 HP
engine updated by Red-M Mechanic, Innisfail:
new liner seals, new cam, crankshaft checked, all bearings inspected, new head gasket.Warranty!
Call, text or email for build sheet and more info
250.271.7013
-
33
YOUR COMPLETE ATTACHMENT SPECIALISTS: BIGFOOT Enterprises - Spruce Grove, Ab.
U.S. Built With North American Components
3 Models To Choose - 120, 140B and The New 150 For Commercial and/or Residential use.
Excellent Shipping Rates Across CanadaAll functions are performed from the seat of the skid-steer loader so only one man and one machine is required to do the job that normally takes 2 to 3 people and a couple of pieces of equipment.
Operate From Comfort Of Your Cab Staying Warm In The Cold Winter Months
120 Skid Steer Residential Firewood Processor - Weight: 975 Lbs
140B Skid Steer H.D. Firewood Processor - Weight: 1450 Lbs
150 Skid Steer Commercial Firewood Processor: Weight 1,635 Lbs
• 4-Way or 6-Way Manual Adjustable Splitting Wedge {120 and 140B Models}
• 4-Way or 6-Way Hydraulic Adjustable Splitting Wedge On The Model 150
• Models 120 - 15" Maximum Log Diameter
• Models 140B - 16" Maximum Log Diameter
• Model 150 - 22” Maximum Log Diameter
• LOW FLOW Hydraulics
• Minimum 2800 PSI Required
• Case Drain is Required
• 8’ – 12′ Variable Log Length
• 22” Cut Length On All 3 Models
• Set Your Cut Lengths From 8" to 22" on 140B and 150
• 150 Extended Models - Up to 33" Cut Length
• HD Harvester Chain and Sprocket
• Automatic Oiler
• Universal Quick Attach Skid Steer Mount
• Control Options: Two 3-Button Controls For All 3 Models, 5 Function 12V Pistol Grip {120 and 140B Only}
or 14 Pin Wiring Harness - Dependant On Make of Machine {120 and 140B Only}
• Self-loading
• Average Log Processed in under two minutesCall For More Info and Details
BIGFOOT Enterprises - YOUR COMPLETE ATTACHMENT SPECIALISTS
Spruce Grove, Ab.
CALL RANDY: 780-288-3668
http://www.bigfootenterprises.caUniversal SkidSteer Mount Fits All The Current Skid Steers:
Bobcat, Case, CAT, John Deere, New Holland, Gehl, Mustang, Volvo, JCB, Kubota and OthersAll Our NEW Attachments Are Built By Quality Canadian And U.S. Manufacturers And Covered By Full Manufacturer's Warranty
BIGFOOT Enterprises Has Been Specializing In Attachments, Nothing Else, For Skid Steer, Wheel Loader & Excavator Equipment Since 2006. With Over 25 Cdn and U.S. Manufacturers, We Cover All Your Attachment Needs.
Call or Email Us Today.
-
34
2016 Peterbilt tri-drive, good condition
-
35
Western Star high-capacity dump trucks:
2024 49x DD16 DD12 Trans Auto, 69000k, 19' Langfab pup.
2018 4900SB new motor DD16 and new ultra shift transmittion, cross country pup
2021 4900SB 18 ultra shift DD 16, 2023 19'pup
2022 4900SF New DD16, 18 std, 2022 19' Langfab pup
2023 49x 58000k std 18sp, 19' Langfab pup
-
36
I have new and used tires available and tire repair.
-
37
Used and in good working order wet kit set up used for fluid and NGL. Includes PTO, pump, hose & tray and adapters.. the whole rig up!. Perfect for a new start or part out as needed on existing system.
Currently installed on W900.
10k obo. Willing to accept some trade / partial trade combination as well.
Interested in:
ATV,snowmobile,boats,seadoo, Toolboxes(shop,trailer,pickup,in frame), headache rack, chains,boomers,3/8 1/2 inch,straps,fenders,certain tools,slip tank, trailer 18-20ft car hauler or flat deck(pickup trailers), Cummins engine pick up truck, Kenworth W900 spare parts, Jeep parts like bumpers,winch other off-road accessories
-
38
13ft Knight gravel pup
-
39
Certified Brandon Seed Wheat for sale
98% germination.
Contact 250-782-0220
-
40
Wheels: 24.5 Aluminum
Tires: 11R24.5 Michelin XWZ
Suspension: Air
Other:
10 EXTE 9'6" Wide Bunks
Aluminum Wheels inside & OutPlease contact Sales at Gear O Rama to book a viewing today!
-
41
98 Kenworth T800 tridrive 18 speed. Has 3406E Cat engine was inframed in November 2021. No ABS and elog exempt. All new brakes and drums on drive axles. New water pump March 2023. New rad September 2023. New batteries. Has 4:30 gear ratio 5th wheel with scale pads. Could use some cosmetic TLC. Runs well no issues. Fresh CVIP
-
42
Model: 52' Tridem Drop Frame Logger
Exterior Color: Black
Wheels: 24.5 Aluminum
Tires: 11R24.5 Michelin XWZ
Suspension: Air
Other:
10 EXTE 9'6" Wide Bunks
Aluminum Wheels inside & OutPlease contact Sales at Gear O Rama to book a viewing today!
-
43
Hustler, Kirchner and Alo front end loader and 3pt hitch attachments. Everything pictured and more in stock. Lots of other attachments available to order and even custom built.
Hustler GrabMax large silage/ manure grapple
Hustler Bale slice Handles 4’x5’ bales
Hustler DynoGrab very hd/ feedlot grapple bucket
Hustler CakeBucket, feeds grains, pellets etc out either side, attaches to front end loader
Hustler Swifthitch, turns your 3pt into a Pintle hitch
Hustler Regener8tor, 3pt hitch folding pasture harrow
Hustler Liftmax, loader and skid steer round bale and square bale forks
Hustler Softhands, loader and skid steer silage bale huggers
Alo Maxigrapple buckets, various sizes availableKirchner 3pt to 5th wheel and 2” receiver adapter
Kirchner 3pt hitch and loader bale forks
Kirchner pallet forks
Kirchner 3pt hitch bale unrollerCall or text Frank for more information and pricing at 250 71974sevenzero
-
44
Great little plow truck, very versatile and easy to operate. Only requires class 5 with air. Side sander and removable rear sander. 8 m3 capacity with sideboards. C7 pre emmision cat engine with 5 speed auto transmission Only requires safety once a year due to lower GVW on single axle truck. Front plow and wing easily removed for summer work as a dump truck. Apron on rear and could easily attach pintle hitch. Side sander and rear work great ! 90% on rear tires. Inspection last done in Oct 2023
-
45
Wide Cut Mill for sale, cut up to 60”x20’, it has a 17.5hp briggs that I bought new for the build and has been strong since day one. Belt driven to a pulley and shaft.
This is truly portable and setup time has been under 3 minutes from the time the truck is unhitched!
Hand crank carriage feed and power up/ down makes it super easy on the body to slab up some huge trees.
Cad designed and stress tested before building.
Frame and carriage has been designed to hold over 9200 pounds and have had over 9600 pound oak on it recently.
$500 in chains come with it.
Extra supports and log dogs also come with the unit.
Delivery to nearby provinces available, any further and or states side is buyers responsibility but know of a few transport companies that can haul anywhere in North America that I can give you contact details.
Location: New Brunswick, Canada
Asking $10,500CadShow less
-
46
Champion 740 Grader with wing all works just put new batteries in also have manual any questions feel free to contact me
-
47
Been awhile since we have seen a trade this clean! 2022 CS2520. Comes with front blower, loader, box blade, and tire chains. Only has 22 hours on it! This will certainly not last long. Come on in to discuss, we would love to put something together for you. $24995 plus fees and tax.
Please contact Kennebecasis Land & Leisure @ (506) 847-2792 or joe.armstrong@krentals.ca
-
48
Western V Plow 7 1/2 ft ..wire harness / Remote / front mounting plate NOTE : possible trade for side by side
-
49
Tire machine car lift Parking lift Wheel balancer Auto Hoist Mondial GP9L 9000Lbs Car Lift They are in stock and we ship Canada wide 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .
MONDIAL AUTOMOTIVE EQUIPMENT, GP-9L is is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 9000 Lbs capacity. Its an asymmetric lift - Double cylinder, Steel pulleys and equalizing cable system. - Truck adapters are included. - motor / pump 3 hp - 220 volts. - The height of the lift is 9'4 "-
Combo (Symmetrical and Asymmetrical) Arm Assembly
Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8"
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"
Screw-in pads 4 pieces included
Truck adapters 4 pieces included
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32" with Supporting Bracket.
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
Overall Height: 113 5/8"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adapters: 81"
Maximum Lift height without Truck Adapters: 75"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): 100"
Column to Column Width: 109"
Column Cross Section: 11"L x 7"W
Floor Plate Cross Section: 10 5/8"W x 1 7/8"H
Driving Mode: Dual hydraulic cylinders, chain drive
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Lifting Capacity: 9,000 LB
Time to full rise: 50 sec
Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
Anchor bolts/mounting hardware included
Tool trays and toe guards included- Warranty is 1 year on parts and 5 years on the structure.
-Transport service and delivery available across Canada
See my other ads !!!!!!1 year warranty on parts and 5 years on structure.
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
50
2 furrow plough for sale
Great little plow
Could easily be reduced to a single furrow