Cars & vehicles, Other with in Canada, Nova Scotia, Truro.
-
1
Electric mirror (did work) can buy just one
-
2
Open to Reasonable cash offers.
First photo is from Google to show what it'd roughly look like on a vehicle.
For more information please text me at 902 890 4888 thank you
-
3
Tractor front protector
-
4
I have a 96 chev 4x4 short wheel base that I parting out. It has a 305 in it with an auto trans. Can be heard running. The front bumper,hood and doors can be reused. Give me a text or a call for pricing. 902 397 0119
-
5
Steel Half tracks for older 1950-60 tractor
-
6
Two 16”, four bolt rims to fit a Ford focus
-
7
lots of potential, minor dents and surface rust, mounted to a shortened s10 frame, 440 dodge auto transmission, will run with gas and a battery, needs 2 c clips that bolt to end of transmission to drive shaft, rear brakes are hooked up, electric fuel pump, possi rear end , no papers $5000 cash firm
-
8
Grote LED portable light. Class 1. 12 or 24 volt. 24 amber light bulbs. 4 suction cups to mount. 10” wide x 7” high. $175.00
-
9
Paying Cash on the spot
For your old Scrap Vehicle
For a Quote text or call 902 890 4888
-
10
one fiberglass 34 roadster body, other 33 ford tudor body, both have chassis wheels steering boxes no papers or drive train, the 34 is on a 89 toyota supra chassis possi , independant suspension most was new, the 34 is on origional rear half of frame channeled and chopped, possi rear end need $5000 cash for the pair
-
11
W900l 2016 new drop in engine by Bayview Kenworth last year June
-
12
Brand new in the box Moroso Wire Separators fit spark plug wires 7 - 9mm. Two packs for V8 engines or smaller. Also a few spares in a third package. See pictures.
-
13
Liquid cooled single cylinder, fully enclosed 150cc 65 plus mph and 100 mpg , runs drives everything works, has very good tires and seat runs like new, 34,000 kms, no mvi , no papers and may need battery, perfect for camp ground or scooting around , will post better pics tomorrow
$1200
-
14
One loading ramp. Folds for easy transport.
$60.00
-
15
Steel Half tracks for older 1950-60 tractor
-
16
I'm looking for approximately 6 to 10 feet of 3inch (inside diameter) garage exhaust hose to vent car exhaust
-
17
AGT Zephyr Golf Cart, awesome people mover for the camp ground or cottage. Financing available
-
18
Car Mechanic shop with
two bays for Rent Or Lease ( Shubenacadie),
-
19
I have two pieces of perforated stainless steel metal measuring 16" x 40" x 1/8" with 9/32" perforations. It was bought to use as trays on a wood splitter, but that didn't happen. Selling for $20.00 each.
-
20
custom built gas powered wood splitter can keep 1 man busy or up to 3, has a flip down side to stock pile a few sticks, will split 2 sticks at the same time into 5 pieces and can cut one on the way back, and once split the wood will not fall on the ground as sides have live decks and will retrieve wood back to you, works well and very powerful , easy on gas, carb was just cleaned, oil was just changed, has a good going over and is ready to work $1600 cash firm and yes can be towed down any road, cost alot more than asking price to build
-
21
Steel roller 13" long on face,6" diameter, 3/16" thick roller face steel,1 1/4" shafting with key way on drive end. It is unused $50.00. Also have two approx same length but with gripper bars and larger diameter unused Will post pictures soon. Phone 902 664 6151,Amherst
-
22
N&N 20 Foot Equipment Hauler
Galvanized Rims and axles
Adjustable hitch
2 5000lbs axles
Slide in Ramps
Hot Dipped Galvanized!!
We have this trailer on special for $52.00 bi weekly plus tax. For more information Contact Patterson Sales in Truro at 902-305-0104 and ask for Ryan
-
23
Heavy duty PTO shaft -29" closed and 40" long fully extended tip to tip.This shaft has a unique ball bearing set that the shaft telescopes in and out on. if you look at picture of shaft through the grease hole on shield you can see the gorrove the bearing run on. These are US made shafts and designed for constant telescoping in and out under full load. This has a 1000rpm yoke on tractor end (could be changed to 540 six spline)and a six spline std on implement end. There is no shearpin. Rated for approx 110hp at 1000rpm.. These were an expensive shaft when new,over $1000.00. Theis one is unused and would sell it for $600.00. Also have one that is slightly used with a 540 yoke on tractor end. $500.00 for it. Phone 902 664 6151. Amherst.
-
24
Steel gauge or press wheels,US made. 14"x2" and has a 1 3/8" centre hole diameter. could be used as a gauge wheel on some gardening equip or a press wheel for seed. Not exactly sure what they were for originally. Have a matching pair . don't think they were ever used much. $50.00 for pair. Phone 902 664 6151,Amherst.
-
25
New CB Cable for sale
Connects 2 antennas to CB,18 feet long.
$20.
-
26
Looking for anything that I can work on, not picky on what it is, not a big fan of vans or sleds. Not looking to spend much on it (500 and under) so don’t want anything that doesn’t run or needs everything under the sun for a 1000+ just cause it’s a certain make or model sorry but junks junk. Doesn’t need an mvi or all the parts just not paying over 300 for scrap, not being a dick just don’t want to be ripped off so you can clean out the yard email or chat works
-
27
Bought it and never used it set it up once $200 sold the truck
-
28
1-800-361-4095 **** We have more than 40 years of experience in the field to better serve you *******
Tire machine MONDIAL TC-200 combo with balancer
Swing arm Tire changer • It allows to dismantle and mount tires on steel and alloy wheels up to 21 "in diameter • Plastic protectors are provided to for the alloy wheels.- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada-Car lift 9,000lbs
-4 post parking lifts available
Other garage equipment available.For more information contact us Tel: 1800-361-4095
-
29
Complete swap. Excellent running 5.2L magnum, wiring harness and pcm. Everything needed to upgrade from 3.9L 1996-2002. Bolt in and plug and play, same rad, trans and exhaust. No custom fabrication nessesary. Has only 167,000 kms