Cars & vehicles, Boats, watercraft, Other with in Canada, British Columbia, Victoria.
-
1
Low Hours
Ultra Lounge Model
The boat in stored indoors, off site. Please contact to arrange viewings.
-
2
2 very clean plastic water kayak canoe and a plastic paddle board. Comes with paddles.
-
3
Various pulleys of boats. All stainless steel $50 all
-
4
La Volpe is a classic, cutter-rigged Colin Archer ketch built in Norway in 1962. You will not find another boat like this: the entire hull, as well as the deck, is built from old-growth Burmese teak. The structural members are white oak. Fastenings are copper rivets and silicon bronze bolts or screws. Tons of traditional bronze fittings. Built with the best materials, she will last many lifetimes. Sleeps 5. Well-equipped for cruising the west coast and beyond. For a full description, including additional photos and video, visit La Volpe’s website at lavolpe.net. She can be viewed by prior arrangement in Ganges Harbour, Salt Spring Island, BC. (Not for sale in US waters)
-
5
Fishing Kayak, Flat bottom, Gravity Seat, Wheel at the back from easy moving from shore to truck, lots of storage for tackle. Comes with Anchor, Rod Holder and more.
-
6
17’ fiberglass sea kayak made on Vancouver Island. Stern rudder, adjustable foot rest / rudder controls and 189 litres of storage. Excellent condition. Includes cockpit half skirt and cockpit storage cover. Very stable and capable kayak.
-
7
Like new used twice ,pick up in Langford
-
8
I have 2 vintage teak taffrails for sale. One is from a 1966 Trojan, the other from a 1963. Both are 8’5” wide. $180 each.
-
9
PSS seal 7/8”
Used
Was uninstalled last winter
I noticed on uninstall there was no real issue with the seal apart
New $495
Used$120
-
10
Easily connect additional displays, sensors or other components to your NMEA 2000 (N2k) backbone.
Brand new never used
$20 each
-
11
Three new engine belts (bought for yanmar 3HM)
One alternator 104511-78780 Original
Two water pump fits 104511-78780E Aftermarket parts$10/ each
Everything for $25
-
12
Sale pending
** UPDATE - price reduced to $10,500 from $13,500 **
115 HP Merc with approx. 1300 hours of use. Motor has been used in salt water 8 times, with complete rinsing of the motor each time. 2017 9.9 HP Yamaha Kicker with approx. 100 hours.
Leg was rebuilt 2 years ago. New fuel tank. Brand new battery. Boat floors redone, no soft spots anywhere. Wired for 2 Scotty downriggers.
Lowrance Hook 7 fish finder / GPS system with 7” screen. New hand held radio.
Trailer is a Road Runner EZE load. Trailer tires are in good condition.
Price: $13,500 OBOBOAT IS LOCATED IN LAKE COWICHAN
-
13
Great Prices! Check out our website at www.totemstrips.ca
We offer a large variety of cedar b&c and square edge strip sizes & lengths in Red and Yellow Cedar.
Try out our "TalonGrip" strips - economical and a green alternative to full length strips - shipped via UPS.
Check out our 1/4" & 3/16" strip pricing on our website.
Build a beautiful cedar strip canoe, kayak, paddleboard or rowboat. Our Kits are customized to work with any design. Ash & Cherry gunwales, stems, coamings, yokes & decks available.
Full length Totem Strips & Kit orders are packaged in a Totem Box & Shipped across Canada.
-
14
Very rare Russian inflateable Jet boat with polyurathane bottom, alakan series has 1850 grain pvc with a a one piece transom w/removeable top tubes! Tunneled hull! Motor is a very rare 2022 TOHATSU 60/40Hp 4 stroke elec tilt/trim on thumb, russian poly intake and brand new never used stainless impeller and liner, boat and motor had one 7 day hunting trip in it! Maybe 30hrs total use, Paid over 29,000 new for it without trailer. Long wait list for motor, get one now! Brand new Custom trailer also avail for additional $2500 if needed, full warranty on motor through maple marine! Comes with 2 high end pumps and two 12 gal tanks,batt in pelican case, also comes with unused stock intake and impeller, custom rear seat, under seat bags etc
-
15
Beautiful affordable, fuel efficient, classic west coast cruiser designed by the famous shipwright, William Garden, and built by Heiko Hansen in Richmond, BC in 1974. The lapstrake, double-planked mahogany, sleek hull is in excellent condition and is encased in fiber glass, keeping it strong, watertight, and allowing the vessel to achieve a 10 knot max speed with ease. It has a forward and aft berth, both with a separate head (shower in the aft head). Just aft of the door leading to the forward berth and 2nd head is the raised helm station with room for three to sit. Galley has a Dickinson propane stove with oven, electric fridge/freezer and galley food prep area with small bar area. Aft of the galley is an L-shaped seat and teak dining table to starboard with an easy chair to port. Moving aft there is a small corridor with a row of solid teak cabinets leading to the aft berth and head with shower. The aft berth also converts to a second seating area. All seat cushions/sectional is new (2020). Aft of this berth/seating area is a port side door to the covered quarterdeck. Topside is the command bridge and secondary steering with a huge deck aft of it, which can be used as a sundeck.
EQUIPMENT:
The vessel is powered by a single, two-stroke, non-turbocharged Shannon Detroit 6-71 diesel with only 2250 original hours on it! THIS ENGINE BURNS LESS THAN 2 IMP GALS PER HOUR and comes with 1300L of diesel on board with a 1500L total capacity. I had to keep dipping the tanks to believe it myself. Fresh oil change. Vessel has new bow/stern thrusters (new in 2020) for easy docking. Helm has working VHF marine radio, Garmin GPS and autopilot (not yet hooked up), spotlight control mounted on the forward deck. Vessel comes with a 4650W gas generator (new 2022) for those longer stays at anchor. 300' of anchor cable, 100' heavy chain and the remainder heavy rope. Electric windlass is controlled from the helm. Large capacity freshwater tanks and black water tanks, electric water heater for hot showers. New large starting battery (May 2022) Livingston dinghy. Lots of spare parts.
OTHER:
RECENT SURVEY (2022) available on request.
Vessel is moored in Sooke, BC. Current moorage spot is available for only $6 per foot.
Selling because we are moving. Reasonable offers accepted especially during off-season.
Please, serious inquiries only. Email me for more information and/or set up a time to view the vessel.
-
16
Selling our Macgregor 19 power sailboat with trailer and dingy.
Comes with everything you need to sail or powerboat. Interior and Exterior cushions included and stored indoors after each outing.
Easy for one person to setup to sail or leave the rigging at home and burn over to Sidney spit.
Sleeps 2 quite comfortably for overnight trips - we've had up to 4 and made it work.
Brand new tires for trailer.
Brand new starter battery.
Brand new deep cycle battery.
50 HP Tohatsu Motor - Recently serviced and working perfectly.
Please email if interested.
-
17
I have 2 vintage teak taffrails for sale. One is from a 1966 Trojan, the other from a 1963. Both are 8’5” wide. $180 each.
-
18
Brand new never used still in box. I was going to use it to rig some convoluted contraption for my boat then realized I don't have the time.
Spent $850 to buy it.
Id prefer to sell it because I would feel bad returning it.
-
19
SOLD Warehouse Lien Act (RSBC 1996) Chapter 480. Whereas Mr. Barry MacDonald and Ms. Leslie Morison are indebted to Van Isle Marina Co Ltd for storage of a 1976 Bayliner 25 power boat ‘Wahini’, and ought to have been paid, and are still unpaid,
notice is hereby given that said property will be sold to pay the outstanding debt, plus cost of seizure, advertising, and sale, on January 6th, 2023, at 10am. The Auction will take place at Van Isle Marina, 2320 Harbour Road, Sidney, BC, V8L 2P6. Please contact us if you have any questions.
-
20
Console from a 1966 Trojan Sea Voyager. Gauges also available. H: 49.75" / W: 33.75" / D: 11.75".
-
21
Monitor Windvane
Plans have changed so this Monitor Windvane is available for sale. $2200.00 OBO. I have not installed it on my boat but it has previously been used. The last owner replaced a significant number of parts and it is in excellent condition with a number of spare parts. Includes wheel adapter. This is a 1990 model and I believe it was on a Kantor 48 previously. Please call or text Dale at 250-514-0110 or e mail dgchandler01@gmail.com to discuss further. Thanks
-
22
Please check before you buy that the dimensions fit your boat.
Luff: 13.66m
Leech: 14.46m
Foot: 5.83m
Area: 38.951The luff is attached with luff tape to fit a furling in mast system. Finished dimension of the luff tape is 5mm. This will fit in the majority of In Mast furling systems but please make sure you double check.
7.11 Warp Drive Radial Dacron Sailcloth.
The sail rates at 9/10. It is in great condition but was used a couple times on the boat so we didn’t want to give it a perfect condition. The sails has a couple small dirt spots from installing and removing the sail off the boat. Nothing major but something to point out. The sail dimensions were a issue so the sail was only installed and taken down for a replacement.
The Retail is about $4800 Can on this sail and we will sell it for $2150 Canadian. No negotiating on this price. We will drop the price in the sprint if it is still available in a few months.Shipping is extra but available upon request.
Code: 16503
-
23
Bow anchor, 2 Burner stove, ice box, V-berth bed and one long bed, Bathroom with sink and Porta potty, Kitchen Table, Lots of storage, Barbecue, Kitchen sink, Raymarine 120 radar, Vhf Radio. Brand new yamaha 9.9 kicker with electric start and power tilt just had its 30 hr 1st service and a yamaha 225. Boat has 2 new batteries and electric winch has a new battery. Comes with a 1995 Load rite tandam Galvanized trailer completely rebuilt, new bearings and brakes. This is your offshore dream boat. I'm sorry for pics I can only send by phone
-
24
For sale is my custom 8'-4" Achilles river raft, with everything you need to get on the water! $1500.00
This little rig works great on the river, with lots of trips down the Cowichan, as well as many days on the lake. The raft is made with hypalon tubes and dry floor. The boat is baffled with 3 compartments for safe trips down the river. The frame is made with real whitewater hardware from NRS, with beefy aluminum connections and frame. The included Carlisle CAVPRO oars use whitewater oar clips. Combined with the large canoe style seat, this raft is great for maneuvering tight spots on the river, as well as getting on and off the boat quickly. Also included is a custom wood rear deck to lash down gear or use as an extra seat. The entire rig can be disassembled with a single, included tool.
This boat is a riot in whitewater, and a perfect still water boat. Capable of holding 750lbs gross load, so you can load it up for as long as you want to be on the water. Bring your extra rods, coolers, overnight gear, etc. Fit's on a truck bed fully rigged or deflate raft and fold down the frame for easy transport or storage.
Boat is located in Victoria, B.C. and delivery on the island can be arranged.
-
25
I like the idea of owning a boat, but realize that I don't have the time to make full use of it. I am looking for a group of people who are interested in forming a partnership to buy a boat or two and go in on the maintenance and moorage.
-
26
1996 Grady White Islander with twin 150 Yamaha 4 strokes. It has new stereo with 6 speakers and a 10'' sub, new in dash Raymarine 10'' touchscreen GPS/depth sounder, toilet and a brand new top of the line Vinyl windows that are crystal clear. Its wired for downriggers and ready to fish. Everything is in working order, selling because I upgraded to an aluminum. Boat doesn't come with a trailer. I'm planning on using it on my new boat since it didn't come with one. If the trailer is needed something can be worked out. Please text instead of call 250-830-3342
-
27
Backwater Boats are fun and affordable boats suitable for time on the water with family and friends, sightseeing, fishing, hunting and transport to/from shore. At only 59 lbs it is one of the lightest small boats you can buy. Light enough for one person to carry. There is nothing to inflate so you can grab and go. You will be on the water in no time.
Your boat fits easily into the back of a truck/SUV or onto a roof rack, even on smaller vehicles.
Backwater Boats are available in four colors: clear, white, sportsman green and black. The new front seat and new rear bench seat gives you multiple seating configurations. We offer an optional set of oars and oar locks. And, your boat accommodates bolt on accessories that you can attach directly to the hull.
If you don’t want to row the optional aluminium and plastic transom plates allows you to attach a 2.5 hp gas motor or an electric trolling motor with battery to the green, black and white boats only.
Our boats are thermoformed from a single sheet of high durability plastic and are more durable than wood or fiberglass. This means there are no seams to leak, they never need painting, and they’re easy to clean.
Among boaters it is known as a dinghy, tender or skiff. Among sportsmen, it is known as a fishing boat, sled, pram or as most say “an alternative to inflatable boats”. We just call it a great boat that our customers love.
KEY FEATURES
• Lightweight - only 59 lbs
• Safety Floatation Foam - New higher density foam in all seats
• Optional Oars - 2 piece aluminum collapsible oars
• Durable and easy to clean
• Easy to transport - Fit in the back of a truck or SUV, or on a roof rack
• Optional Aluminium & plastic transom plates - Easy to attach a 2.5HP gas or trolling motor
• 3 Seats - Front, Middle and Rear
• Optional Oar Locks - Unique proprietary plated stainless steel oar lock system for better control rowing
• Stainless Steel Hardware - Prevents rustingBOAT SPECIFICATIONS
• Weight – 59 lbs (26.8 kg) White, Black and Green, Clear 65 lbs (29.5 kg)
• Dimensions – 90” Length, 47” Width, 17” depth (229cm x 120cm x 43cm)
• Carrying Capacity – 352 lbs (160kg, Including passengers, cargo and equipment), up to 2 people
• Material – UV resistant ultra strength plastic
• White, Black and Green boats are made from polyethylene plastic, UV resistant coating on both sides
• Clear boats are made using a proprietary high strength plastic, UV resistant coating on both sides
• Front Seat has two cup holders for cans and larger containers (3.3” and 2.9” diameter, 1.375” depth; cell phone holder for newest phones (6.6” x 3.5”), all with drainage channels to disperse water
• Middle Seat has two cup holders (2.9” diameter for cans) and two compartments (3“ x 6”) for items, slots under seat for feet or small items
• Rear Seat has two cup holders (2.9” diameter for cans)
• All seats are removable for storage and stacking
• All seats contain high density flotation foam
• Optional Aluminium and polyethylene Transom Plates, supports 2.5HP gas or electric motor
• Optional oars are 2 piece aluminium that are collapsible for storage; 65” long, 34” long when collapsed, paddles and grips are plastic
• Optional oar locks are a unique proprietary design, stainless steel backing plates
• Stainless steel pad eye and backing plate on bow for towing of tiedown
• One year warranty on all parts and hardware
• Made in CanadaVisit www.plasticboats.com to find a dealer and more images, video and information
-
28
1994 seadoo spx
657cc 2 stroke dual carb engine
Oil injection deleted (runs on premix)
Carbs rebuilt by WFO in October 2020
New battery August 2020
New spark plugs August 2020
New seat
No trailer
-
29
Good condition jib sail made by Genco Sails. No rips, tears, loose stitching or wear. The hanks have some superficial corrosion. The sail is from a Grampian 23 I sold.
The sail is approximately 22 x 9 ft
Please e-mail or txt if interested
-
30
Great Prices! Check out our website at www.totemstrips.ca
We offer a large variety of cedar b&c and square edge strip sizes & lengths in Red and Yellow Cedar.
Check out our 1/4" & 3/16" strip pricing on our website.
Build a beautiful cedar strip canoe, kayak, paddleboard or rowboat- any design works with our kits. Our Kits are customized to your requirements . Ash & Cherry gunwales, stems, coamings, yokes & decks available.
Strip & Kit orders Packaged in a Totem Box & Shipped across Canada.