Cars & vehicles with in Canada, British Columbia, Victoria.
-
1
2017 Multiquip DCA 25 kw Generator
- 3300 hours
- Isuzu engine
- Trailer mounted
- Very good condition
- Load banked & serviced
$32000.00
West of Lacombe, Ab.
6kw generator
8kw generator
10kw generator
15kw generator
20kw generator
35kw generator
40kw generator
45kw generator
50kw generator
55kw generator
60kw generator
65kw generator
70kw generator
75kw generator
80kw generator
85kw generator
90kw generator
95kw generator
100kw generator
105kw generator
110kw generator
115kw generator
120kw generator
Stand by generator
Towable generator
Job site generator
Trailer generator
Back up generator
Off grid generator
John Deere generator
Kubota generator
Cummins generator
Gen Set
Portable Power
Portable Generator
Mobile Generator
Diesel Generator
Generator
Diesel Generator
Gen Set
Generator
Magnum
Generac
Cummins
Light tower
Light plant
Whisperwatt
Backup generator JLG , Genie , Caterpillar , D9 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat, Grader , 140G , Komatsu , Bell , 140H , DOZER , CAT, JLG , Genie , Caterpillar , D9, D9T , D6 , Hitachi , Kubota, Doosan, Wacker neuson , John deere , Isuzu , Bobcat , Bomag , Hamm , Skyjack Backup power, Standby generator ,Construction, generator, Light plant, Light tower Wacker , Mq, Multiquip , Teresa, Caterpillar , Cummins ,Isuzu, Genrac, IR, Honda, Yamaha , Mitsubishi ,John Deere, Dewatering, bulldozer , skidsteer
-
2
Daily Rental $177 24 hrs
Weekly $777
4 Weeks $1877
Visit link for more info and booking
https://www.victoriatrailers.ca/mini-excavator-rentals-victoria-bc/1t-mini-excavator-rental/
Victoria Trailers Ltd.
www.victoriatrailers.ca
rentals@victoriatrailer.ca
Weight kg 950
Bucket capacity m³ 0.025
Bucket digging capacity kn 10.3
Engine BRIGGS & STRATTON (Gasoline
engine)9.9kw,14 HP,EPA
Swing Boom ° 65
Climbing gradient ° 30
Track length mm 1090 / 3′.58″
Platform ground clearance mm 380 / 1′.25″
Rear-end swing radius mm 733 / 2′.40″
Width of chassis mm 946 / 3′.10″
Width of track mm 180 / .59″
Height of track mm 320 / 1′.05″
Over-length mm 2550 / 8.37″
Machine height mm 2200 / 7′.22″
Walking speed km/h 2.3
Max. digging radius mm 2400 / 7′.87″
Max. digging depth mm 1650 / 5′.41″
Max. digging height mm 2490 / 8′.17″
Max. dumping height mm 1750 / 5′.74″
Max. vertical depth mm 1400 / 4′.49″
Min. gyration radius mm 1190 / 3′.90″
Max. lifting height of dozer blade mm 325 / 1′.07″
Max. lifting depth of dozer blade mm 175 / .57″
-
3
Parting out New Holland EC160 excavator. Made by O&K, parts are all the same. Everything available except the following:
Swing drive,
Engine,
Buckets/thumb.
Machine was operational before swing failed. The final drives, pumps, cylinders are all good. Complete lower section could be used to make a tracked vehicle. Can ship parts at buyers cost. Text 9028907884 or email
-
4
TNT Attachments is a company based out of Stony Plain, AB making some of the highest quality excavator attachments on the market. We manufacture attachments for all sizes of excavators using the best in high grade steel, such as AR400-500 and each cut is done with a CNC HD plasma to ensure high quality cuts. Our goal is to serve our customers with the highest quality products, all proudly made in Canada.
Some of the items are;
Wrist / tilt bucket
Dig / cleanup buckets
Trenching spoon buckets
V buckets
Frost buckets
Skeleton buckets
Hydraulic thumbs
Excavator pallet forks
Excavator to skid steer adaptors
Top mounts
Ripper shank
Stump ripper
Brush rakes
Root rakes
Chuck blades
And much moreLooking for something specific or need a custom build to meet job requirements we can help you out!
Please feel free to message for pricing and availability on any attachments you need. Looking to purchase more than one? Let us know, we do package deal pricing!
-
5
Picking stones efficiently, a fully functioning sift, a large working width and durability of the machine have been the main goals when creating the Scorpio. The machine is equipped with, among other things, a fully hydraulic drive, which directs the power to where the demand is greatest. This prevents the machine from breaking down if it gets blocked. The large and durable lifting tines are flexible in all directions. The tines do not break if the machine gets blocked and they also endure reverse motion.
Every steel bar in the sieve is replaceable and every other sieve steel bar can be removed. The distance between the sieve bars is 40–110 mm. Every other bar is mounted at a different height to prevent wedging.
The wide side rake tines are made of Hardox steel and are firmly welded onto the rotor tube. The rotor bearings are built into the steel tube, which makes it highly durable. The side rakes can also be reversed. The side rakes are positioned to prevent the stones wedging between the rake rotor and the frame structure.
Scorpio has a large hopper, with a tipping height of 2,7 metres. This way it can easily reach over the sides of a big trailer. The back wall of the hopper also sifts out soil. The side plates and the hopper lid plate are made of Hardox steel.
Scorpio has a sturdy frame, a telescopic drawbar with collision guard, wide rakes, large tandem wheels, and is fully hydraulic driven.
The automatic depth adjustment is ofcourse also hydraulically operated. The machine keeps track of the ground actively. The adjustable depth function has two depth settings that can be manually overridden by the driver’s commands. With automatic depth adjustment, the driver doesn’t need to keep track of the ground, especially in dusty conditions with poor visibility.
The ELHO Scorpio work terrain is not only the removal of stones from farm fields but also, for example, from roads, other type of fields, renovation sites and construction sites of green infrastructure. The Scorpio 550 is very suitable for contracting.
Available to purchase or rent.
For more information please contact Nathan.
Call: 403-634-4922
Email: treadstonemachinery@gmail.com
Website: treadstonemachinery.com
-
6
Are you looking to add another stream of income to your existing construction company, or add another set of barges or a new push boat to your existing company?
We can build sectional barges, one piece barges or push boats for you next project weather it’s, Marine construction, drilling, bridge construction, diving, retention pond floats, and much more.
We can build you next barge or push boat to your spec.
Feel free to reach out for your next one piece barge, sectional barge or push boat.
We can do lots of ad ons, motor mounts, spud pockets, railings, consoles and much more.
We also offer financing OAC
Please call Jordy for pricing and availability
519-992-0639
-
7
2019 FORD F-550 CREW CAB SERVICE TRUCK
Amvic Licenced...****** NEW SERVICE BOX****************
- SERVICE BODY - 12' LONG x 8' WIDE x 60" TALL
- WORKPLATE STYLE REAR BUMPER WITH JACK LEGS
- OXYGEN/ACETYLENE COMPARTMENT
- TIGER CRANE 4016E
- VMAC AIR COMPRESSOR
-RED DOT R254 HEATER
- 37,979 KMS
- Call Now: 780-705-8780
Visit us online: www.jeetautosales.ca
Get Preapproved: https://www.jeetautosales.ca/apply-for-credit/
Address: 7020 50 Street NW Edmonton. Alberta
Open 7 days a week
Hours of Operation: Monday â?? Friday 9am till 7pm
Saturday: 9am till 5pm.
Sunday: Noon till 5pm
Engine: 6.7l
-
8
PRIVATE SALE
FOUND MY FISHING BOAT, LIMITED OFFER AT $26,000 from $32,000
$45k to replace with all features
2016 Campion A16 OB BR - lake use only
Evinrude eTEC 90 with s/s prop - 38 hours only, garage kept, son's heath why low hours; custom ordered boat
EZ Loader trailer with fold-away hitch, fits most garages
Built-in fuel tank
Flip down deluxe bucket seats with headrests with slider base
Wraparound stern seating (with storage under), bow seating with storage under
Marine carpeting
Faria guages
Fuel gauge w/ stainless steel fuel fill cap
Tilt steering
LED lighting cupholders/speakers/interior
Kicker® KMC100 Media Center with AM/FM, Bluetooth, USB, iPod, and four Kicker Marine speakers
Glove compartment / icebox
Stainless steel deck hardware
Stainless steel grab handles
Welded stainless steel bow rails
Stainless steel open base cleats
Flip-down stainless steel swim ladder
Color-coded electrical system w/fused circuit
Also comes with:
Safety kit
Fire extinguisher
Life Jackets
Water Toys
Might consider partial trades up to $8,500 for a small car, motorcycle, dirt bike, or a baby grand piano up to $5,000
Construction:
Three-dimensional woven fiberglass construction
Composite stringer grid & floor
Composite transom
Kevlar laminate reinforcement, Uni-bond deck joint, and enviro responsible resin
Color-coordinated gelcoat
Specs:
2016 Campion A16 OB BR
Max HP: 90 HP
Trim Name: Custom Ordered
Length: 16’1" (4.9 m)
Boat Beam : 6’6 ” (1.98m)
Weight: 940 lbs. (426 kg)
Fuel Capacity: 13 US gal (49 L)
Hull Type: ConvexV
Seating Capacity: 5 Persons
Draft Up: 14” (35.5 cm)
Draft Down: 31” (78.8 cm)
Dead Rise: 16°
Centerline: 16’1” (4.9m)
Note: It is not a fishing boat, so as much as we have enjoyed this boat when we have been able, it is a boat I would not take out on the ocean or fish in. Why the sale.
Will deliver within BC or Washington.
-
9
2 very clean plastic water kayak canoe and a plastic paddle board. Comes with paddles.
-
10
Various pulleys of boats. All stainless steel $50 all
-
11
La Volpe is a classic, cutter-rigged Colin Archer ketch built in Norway in 1962. You will not find another boat like this: the entire hull, as well as the deck, is built from old-growth Burmese teak. The structural members are white oak. Fastenings are copper rivets and silicon bronze bolts or screws. Tons of traditional bronze fittings. Built with the best materials, she will last many lifetimes. Sleeps 5. Well-equipped for cruising the west coast and beyond. For a full description, including additional photos and video, visit La Volpe’s website at lavolpe.net. She can be viewed by prior arrangement in Ganges Harbour, Salt Spring Island, BC. (Not for sale in US waters)
-
12
Fishing Kayak, Flat bottom, Gravity Seat, Wheel at the back from easy moving from shore to truck, lots of storage for tackle. Comes with Anchor, Rod Holder and more.
-
13
17’ fiberglass sea kayak made on Vancouver Island. Stern rudder, adjustable foot rest / rudder controls and 189 litres of storage. Excellent condition. Includes cockpit half skirt and cockpit storage cover. Very stable and capable kayak.
-
14
Like new used twice ,pick up in Langford
-
15
I have 2 vintage teak taffrails for sale. One is from a 1966 Trojan, the other from a 1963. Both are 8’5” wide. $180 each.
-
16
PSS seal 7/8”
Used
Was uninstalled last winter
I noticed on uninstall there was no real issue with the seal apart
New $495
Used$120
-
17
Easily connect additional displays, sensors or other components to your NMEA 2000 (N2k) backbone.
Brand new never used
$20 each
-
18
Three new engine belts (bought for yanmar 3HM)
One alternator 104511-78780 Original
Two water pump fits 104511-78780E Aftermarket parts$10/ each
Everything for $25
-
19
This adorable Vintage Airstream has been updated in all the right places, while maintaining its original 1960's charm. A very rare find!
-
20
Sale pending
** UPDATE - price reduced to $10,500 from $13,500 **
115 HP Merc with approx. 1300 hours of use. Motor has been used in salt water 8 times, with complete rinsing of the motor each time. 2017 9.9 HP Yamaha Kicker with approx. 100 hours.
Leg was rebuilt 2 years ago. New fuel tank. Brand new battery. Boat floors redone, no soft spots anywhere. Wired for 2 Scotty downriggers.
Lowrance Hook 7 fish finder / GPS system with 7” screen. New hand held radio.
Trailer is a Road Runner EZE load. Trailer tires are in good condition.
Price: $13,500 OBOBOAT IS LOCATED IN LAKE COWICHAN
-
21
Great Prices! Check out our website at www.totemstrips.ca
We offer a large variety of cedar b&c and square edge strip sizes & lengths in Red and Yellow Cedar.
Try out our "TalonGrip" strips - economical and a green alternative to full length strips - shipped via UPS.
Check out our 1/4" & 3/16" strip pricing on our website.
Build a beautiful cedar strip canoe, kayak, paddleboard or rowboat. Our Kits are customized to work with any design. Ash & Cherry gunwales, stems, coamings, yokes & decks available.
Full length Totem Strips & Kit orders are packaged in a Totem Box & Shipped across Canada.
-
22
Very rare Russian inflateable Jet boat with polyurathane bottom, alakan series has 1850 grain pvc with a a one piece transom w/removeable top tubes! Tunneled hull! Motor is a very rare 2022 TOHATSU 60/40Hp 4 stroke elec tilt/trim on thumb, russian poly intake and brand new never used stainless impeller and liner, boat and motor had one 7 day hunting trip in it! Maybe 30hrs total use, Paid over 29,000 new for it without trailer. Long wait list for motor, get one now! Brand new Custom trailer also avail for additional $2500 if needed, full warranty on motor through maple marine! Comes with 2 high end pumps and two 12 gal tanks,batt in pelican case, also comes with unused stock intake and impeller, custom rear seat, under seat bags etc
-
23
Beautiful affordable, fuel efficient, classic west coast cruiser designed by the famous shipwright, William Garden, and built by Heiko Hansen in Richmond, BC in 1974. The lapstrake, double-planked mahogany, sleek hull is in excellent condition and is encased in fiber glass, keeping it strong, watertight, and allowing the vessel to achieve a 10 knot max speed with ease. It has a forward and aft berth, both with a separate head (shower in the aft head). Just aft of the door leading to the forward berth and 2nd head is the raised helm station with room for three to sit. Galley has a Dickinson propane stove with oven, electric fridge/freezer and galley food prep area with small bar area. Aft of the galley is an L-shaped seat and teak dining table to starboard with an easy chair to port. Moving aft there is a small corridor with a row of solid teak cabinets leading to the aft berth and head with shower. The aft berth also converts to a second seating area. All seat cushions/sectional is new (2020). Aft of this berth/seating area is a port side door to the covered quarterdeck. Topside is the command bridge and secondary steering with a huge deck aft of it, which can be used as a sundeck.
EQUIPMENT:
The vessel is powered by a single, two-stroke, non-turbocharged Shannon Detroit 6-71 diesel with only 2250 original hours on it! THIS ENGINE BURNS LESS THAN 2 IMP GALS PER HOUR and comes with 1300L of diesel on board with a 1500L total capacity. I had to keep dipping the tanks to believe it myself. Fresh oil change. Vessel has new bow/stern thrusters (new in 2020) for easy docking. Helm has working VHF marine radio, Garmin GPS and autopilot (not yet hooked up), spotlight control mounted on the forward deck. Vessel comes with a 4650W gas generator (new 2022) for those longer stays at anchor. 300' of anchor cable, 100' heavy chain and the remainder heavy rope. Electric windlass is controlled from the helm. Large capacity freshwater tanks and black water tanks, electric water heater for hot showers. New large starting battery (May 2022) Livingston dinghy. Lots of spare parts.
OTHER:
RECENT SURVEY (2022) available on request.
Vessel is moored in Sooke, BC. Current moorage spot is available for only $6 per foot.
Selling because we are moving. Reasonable offers accepted especially during off-season.
Please, serious inquiries only. Email me for more information and/or set up a time to view the vessel.
-
24
Selling our Macgregor 19 power sailboat with trailer and dingy.
Comes with everything you need to sail or powerboat. Interior and Exterior cushions included and stored indoors after each outing.
Easy for one person to setup to sail or leave the rigging at home and burn over to Sidney spit.
Sleeps 2 quite comfortably for overnight trips - we've had up to 4 and made it work.
Brand new tires for trailer.
Brand new starter battery.
Brand new deep cycle battery.
50 HP Tohatsu Motor - Recently serviced and working perfectly.
Please email if interested.
-
25
I have 2 vintage teak taffrails for sale. One is from a 1966 Trojan, the other from a 1963. Both are 8’5” wide. $180 each.
-
26
Brand new never used still in box. I was going to use it to rig some convoluted contraption for my boat then realized I don't have the time.
Spent $850 to buy it.
Id prefer to sell it because I would feel bad returning it.
-
27
SOLD Warehouse Lien Act (RSBC 1996) Chapter 480. Whereas Mr. Barry MacDonald and Ms. Leslie Morison are indebted to Van Isle Marina Co Ltd for storage of a 1976 Bayliner 25 power boat ‘Wahini’, and ought to have been paid, and are still unpaid,
notice is hereby given that said property will be sold to pay the outstanding debt, plus cost of seizure, advertising, and sale, on January 6th, 2023, at 10am. The Auction will take place at Van Isle Marina, 2320 Harbour Road, Sidney, BC, V8L 2P6. Please contact us if you have any questions.
-
28
Console from a 1966 Trojan Sea Voyager. Gauges also available. H: 49.75" / W: 33.75" / D: 11.75".
-
29
Monitor Windvane
Plans have changed so this Monitor Windvane is available for sale. $2200.00 OBO. I have not installed it on my boat but it has previously been used. The last owner replaced a significant number of parts and it is in excellent condition with a number of spare parts. Includes wheel adapter. This is a 1990 model and I believe it was on a Kantor 48 previously. Please call or text Dale at 250-514-0110 or e mail dgchandler01@gmail.com to discuss further. Thanks
-
30
CarAgencia offers a wide range of used Mazda cars for sale. Visit our website to find the best deals on second hand Mazda vehicles today!
For more information visit our website:- https://caragencia.com/cars-for-sale/mazda
https://www.preferredprofessionals.com/panama/professional-services/caragencia
-
31
List of the NEW and used MODEL OF OUTBOARD ENGINE :
offeroutboard1@gmail.com
Call or WhatsApp: + 1-863-300-3370
Yamaha Outboard Motors VF225 LA 225 HP
Yamaha Outboard Motors VF200 LA 200 HP
Yamaha Outboard Motors LF200 XCA 200 HP
Yamaha Outboard Motors F250 OUCA 250 HP
Yamaha Outboard Motors F300 OUCA 300 HP
Yamaha Outboard Motors LF300 OUCA 300 HP
Yamaha Outboard Motors F300 XCA 300 HP
Yamaha Outboard Motors VF250 XA 250 HP
Yamaha Outboard Motors LF250 OUCA 250 HP
Suzuki DF150TL 150 Horsepower
Suzuki DF175TX 175 Horsepower
Suzuki DF200ATL 200 Horsepower
Suzuki DF250TXW 250 Horsepower
Suzuki DF300APXXW 300 Horsepower
Mercury Outboard Motors 1300V23LP 300 XL Verado Pearl Fusion White
Mercury Outboard Motors 1F904631D 90 EXLPT Command Thrust Fourstroke
Yamaha F40LA Outboard Motor (Four Stroke)
Yamaha F150TLRD Outboard Motor (Four Stroke)
Yamaha F75LA Outboard Motor (Four Stroke Midrange)
Yamaha F150LA Outboard Motor (Four Stroke In-Line)
Yamaha VF150LA Outboard Motor (Four Stroke V Max SHO)
Yamaha LF200XA Outboard Motor (Four Stroke V6 3.3L )
Honda BF25D3SHG Outboard Motor (Four Stroke)
Honda BF150A2LA Outboard Motor (Four Stroke)
Honda BF90D2LRTA Four Stroke
Honda BF250ALA Four Stroke
Honda BF225AK3LA Four Stroke
New Yamaha F300 XCA 300 HP
New Yamaha F90 LA 90 HP Four Stroke Midrange
New Yamaha F90 JA 90 HP Four Stroke Jet Drive
New Yamaha VF150LA Four Stroke V MAX SHO 150HP
New Yamaha VF200 LA 200 HP Four Stroke V Max
New Yamaha VF225 LA 225 HP Four Stroke V Max SHO
New Yamaha LF350 UCB 350 Horsepower V8 30" Shaft
New Yamaha F300 XCA 300 HP $8,500USD
New Yamaha LF300XCA Outboard Motor $8,500USD
New Yamaha F300UCA Outboard Motor $8,500USD
New Yamaha LF300UCA Outboard Motor $8,500USD
New Yamaha 250hp at 5500 rpm 4-Stroke Single Outboard $7,500USD
New Yamaha F250 UCA 250 HP Four Stroke V6 2014 $7,500USD
New Yamaha Outboards F 150HP la 4Stroke $5,500USD
New Yamaha Outboards Vf 225HP Sho Engine 4Stroke $6,500USD
New Mercury 250HP ProXS Optimax 2-stroke CPO Engine and Engine Accessories 4Stroke $6,500USD
New MERCURY 300HP VERADO $10,000USD
Mercury 300HP XL VERADO 4S Engine and Engine Accessories 4Stroke $8,000USD
Mercury 300CXL VERADO Engine and Engine Accessories 4Stroke $10,000USD.
Yamaha vmax SHO 250HP Outboard Motor $4,000 usd
Yamaha VMAX SHO VF 200 HP 4 Stroke Outboard Motor $3,400 usd
Yamaha F20LEHA 20HP 4-Stroke Outboards Motor $2,000usd
Yamaha F25D 4 stroke outboard engine with tiller handle 25hp $2,500 usd
Yamaha 90HP Four 4 Stroke Outboard Motor Engine $3,800usd
Yamaha 60 HP 4 Stroke Outboard Motor Engine $3,500 usd
Yamaha 30 HP 4 Stroke Outboard Motor Engine $2,000 usd
Yamaha 40 HP 4 Stroke Outboard Motor Engine $2,800 usd
Yamaha 75 HP 4-Stroke Outboard Motor Engine $4,000 usd
Yamaha 115hp, F115LA 4-stroke, 4-cylinder, 20? Shaft -Electric Start – Remote Steering $4,500 usd
Yamaha 350hp, F350XCA 5.3L V8 Four Stroke, 25? Shaft -Electric Start – Remote Steering $5,200 usd
Mercury 20 HP 4 Stroke Outboard Engine $2,000 usd
Mercury 25 HP Four Stroke Outboard Engine $2,500usd
Mercury 30 HP Four Stroke Outboard Engine $2,600 usd
Mercury 9.9HP 4-Stroke Outboard Motor $3,000 usd
Mercury 60HP 4 Stroke Outboard Motor $3,300 usd
Mercury 90HP Four Stroke Outboard Motor $3,300 usd
Mercury Four Stroke 100 HP EFI Outboard Engine $3,500usd
New Suzuki DF 90 ATL Four Cycle DOHC 16-Valve
New Suzuki DF 115 ATL DOHC, 16 valve, 4 cylinder
New Suzuki DF 9.9 THX 9.9hp, 4-Stroke, 2-Cylinder
New Suzuki Marine DF 225HP Outboards Motors 4Stroke $6,000USD
New Suzuki 250HP APX Engine and Engine Accessories 4Stroke $6,000USD
New Suzuki DF300HP TXXZ Engine and Engine Accessories 4Stroke $8,500USD.
Suzuki 9.9HP 4-Stroke Outboard Motor $2,800 usd
Suzuki 90HP 4-Stroke Outboard Motor $3,600 usd
Suzuki 60HP 4-Stroke Outboard Motor $3,000 usd
Suzuki 100HP 4 Stroke Outboard Motor $4,000 usd
Suzuki 115HP 4 Stroke Outboard Motor $4,500 usd
Suzuki 140HP 4 Stroke Outboard Motor $5,000 usd
Suzuki 200HP 4 Stroke Outboard Motor $5,100 usd
Suzuki 225HP 4 Stroke Outboard Motor $5,300 usd
New Honda BFP 60 A1XRT 60 HP Four Stroke
New Honda BF 90 D2XRT 90 HP Four Stroke
New Honda BF 115 D1XCA 115 HP Four Stroke
New Honda BF 150 A2XCA 150 HP Four Stroke
Honda 25 HP 4-Stroke outboard Motor $2,100 usd
Honda 30 HP 4-Stroke outboard Motor $2,400 usd
Honda 40 HP 4-Stroke outboard Motor $3,000 usd
Honda 50 HP 4-Stroke outboard Motor $3,300 usd
Honda 60 HP 4-Stroke outboard Motor $3,500 usd
Honda 75 HP 4-Stroke outboard Motor $3,800 usd
Honda 105 HP 4-Stroke outboard Motor $5,000 usd
Honda 150 HP 4-Stroke outboard Motor $5,500 usd
Honda 225 HP 4-Stroke outboard Motor $6,000 usd
Honda 135 HP 4-Stroke outboard Motor $6,500 usd
Humminbird Solix-10 Chirp with Mega SI+ Fishfinder GPS Combo G2 (Humm-411010-1)
Humminbird 409780-1 ONIX Series 10ci NT Freshwater Mapping w/Side
Brand New Sealed Humminbird ONIX10ci SI NT Combo
Humminbird ONIX10ci SI NT Combo - Non-Touch Unit Hum-409780-1
Minn Kota Ultrex 80/US2 w/i-Pilot & Bluetooth (80 Lbs. Thrust, 45" Shaft)
Minn Kota Ultrex 80/US2 w/i-Pilot & Bluetooth (80 Lbs. Thrust, 52" Shaft)
Minn Kota Ultrex 112/US2 w/i-Pilot Link & Bluetooth (112 Lbs. Thrust, 45" Shaft)
Minn Kota Ultrex 112/ MDI w/i-Pilot & Bluetooth (112 Lbs. Thrust, 60" Shaft)
Minn Kota Ultrex 112/ MDI w/i-Pilot Link & Bluetooth (112 Lbs. Thrust, 60" Shaft)
GPSMAP 8612xsv MFD/Sonar, US+Can+Bahamas
Garmin GPSMAP 8610xsv Chartplotter Sounder
Lowrance HDS-12 Live with Active Imaging 3-in-1 Transom Mount Transducer & C-MAP Pro
Elite-12 Ti2-12-inch Fish Finder Active Imaging 3-in-1Transducer, Wireless Networking, Real-Time
Garmin GPSMAP 942xs, ClearVu and Traditional CHIRP Sonar with Mapping, 9", 010-01739-03
If you wish for any model of brand not included above, then send us your enquiry and order quote and we get in touch with you soonest.
Contact us through the following Email below:
offeroutboard1@gmail.com
saleoutboard1@yahoo.com
salesoutboard1@hotmail.com
Call or WhatsApp: + 1-863-300-3370
Skype ID: tradeability
-
32
Toyota RAV4 stereo and DVD support for sale $50 in good condition I upgraded to CarPlay feel free to text me or call me at 250-608-3787
-
33
Brand new, in-box Gaerne GX1 Motocross boots. Size 6.5
-
34
Ford tonneau for a 5.5 foot box. Measures 70" L x 72" W. This one piece hard tonneau is in great shape, and will keep your tools, camping or sporting equipment safe and dry. Features a key lock and pneumatic rams to support and lift easily. This is currently on my 2010 Ford F-150 crew cab. Works perfectly.
-
35
Logos range in age from late 50's through to 2000.
Many duplicates are available, and all are not shown.
Some Volvo and Porsche emblems also are available, but not shown in the photos.Please phone for pricing. 250-656-6723
-
36
Fuel Offroad Wheels - Winter Exclusive Deals!
Matte Black Finish Contra and Maverick.
17 Inch - $799 All 4
18 Inch - $899 All 4
20 Inch - $990 All 4.
Package with Winter Tires
LT 265/70R17 Joyroad RX - $599 Extra
LT 275/65R18 Joyroad RX - $649 Extra
LT275/70R18 Joyroad RX - $649 Extra
275/55R20 Haida 617 Winter - $699 Extra
275/60R20 Haida 617 Winter - $699 Extra
LT33x12.50R20 Venom Ice Hunter - $899 Extra
Venom and Joyroad Tires are Studdable for extra $30 per Tire.
Canada-Wide Shipping Available
Buy Only Wheels or Package with Tires and SAVE HUGE!!!
Call Us Now 7803406610
Offer is Available till Wheels are in Stock!
Hurry In, Get Them before they are gone!
6311 Roper Road NW Edmonton, AB
7803406610
-
37
ATV POLARIS GRILL GUARD.
Brand new, never used. Excellent condition.
$110 Langford
Art 250-418-5601 or Diane 250-884-9624
-
38
Suited to 20 tonne plus excavators. Can be used as a auger drive unit or for installing screw piles.
In stock we have 18", 24" and 48" Augers to suit.
Please call for details!
905-379-1558
In stock ready to ship anywhere in Canada!
-
39
Modified sine wave Very lightly used 12 V DC input/ 120 Volt AC output. 12000 Watt peak.
$125
-
40
255/45/17 continental extreme contact DWS tires on torque thrust 17 x 8 with 4 inch offset Chev 4.75 bolt pattern
-
41
Four Klasse Motorsport Concept-M 20x8 5/120 wheels with mounted Nitto Terra Grappler G2 265/50R20 all-terrain tires. Also included are Land Rover TPMS sensors (these wheels/tires were on a 2016 Range Rover Sport), an added value of $600. The total package when new was $3000 (receipt available). Total kilometers on these tires is 54,000 (records available) and they have a stated life of 100,000, so only half used.
These make excellent winter changeovers, in addition to being very capable all-terrain tires, and are a steal at this price.
-
42
Freightliner Dump, 3406 E cat , converted to mechanical, approximately 13000 hrs on inframe new turbo, 18 spd trans, new clutch & flywheel , 16,6 Knight light steel box new floor & cross members , good rubber ,fresh MVI
-
43
less than 2100 hrs.
good condition / always garaged
Call 250-886-4532 ( Victoria BC )
-
44
Screw Pile and Helical Pier Installation Equipment
- Digga High Torque Drive Heads
- Skid Steer & Excavator Mounts
- Torque Monitoring Equipment
**FAST SHIPPING ANYWHERE IN CANADA**
***GREAT LEASE FINANCING OPTIONS AVAILABLE***
Digga’s anchor drives are the most advanced drives available for screw piling and helical pier installation. These drives are specifically designed for the rigors of screw pile installation. Gear boxes are manufactured in house and have been developed through 38 years of testing in the field and listening to the needs of clients.
If you are looking for industry leading performance and reliability, with engineering support, and experienced service you can count on, look no further than Digga for all your anchor drive needs.
An extensive range of dedicated anchor drives are available from 5,000 FT-LBS to 360,000 FT-LBS, single speed and two speed.
We have drives to suit all types of machines:
- Mini Loader
- Mini Excavator
- Skid Steer
- Excavators
- Boom truck
- BackhoePlease contact Aaron at:
Rev-Pile Inc.
1-204-268-5777
www.rev-pile.com***********************************************************
PLEASE CALL OR FILL OUT THE CONTACT FORM ON OUR WEBSITE, WE DO NOT CHECK KIJIJI MESSAGES
***********************************************************
-
45
2006 Sterling ,16.6 Nahannie steel box ,high lift gate , rebuilt 18 spd ,460 Mercedes , new turbo ,upgraded heads ,new rad ,injectors ,fuel pump ,cam ,& crank sensors ,good rubber , clean crack free dash ,power windows good condition
-
46
Engineered Steel Buildings, specific for your locations snow and wind load.
Solid and well built to withstand the most extreme climate conditions.
Certified Engineered Drawings for Permits.
Top quality steel used for your commercial and residential storage needs.
Competitive prices.
Quick delivery.
All sizes available.
Multiple colour choices.
Great for Garages (R.V, Boat, Trucks)
Farm Buildings, heavy equipement storage, Aircraft Hangors, Riding Arenas and more
Contact us for a building quote
http://www.towersteelbuildings.com/building-specials/
-
47
Two machines in one; excavator and bulldozer. 3333.2 hours. Owner operated. Clean. Tight. Comes with tilting cleanup bucket and 36” dig bucket. Has hydraulic quick change and hydraulic thumb. Very well maintained. All maintenance, upgrades, recalls up-to-date. I have maintained the machine in accordance with the factory recommended intervals. Runs great. Buckets, undercarriage, blade in excellent condition. A/C in perfect working order. No dents. No broken glass. No scratches. Seat is in great shape. Machine is work ready.
-
48
204,000 km, Cummins diesel runs great, 6 spd manual transmission, air brakes, air, cruise, 26 foot box, hydraulic power lift gate, $14,250. Victoria, colwood, off Latoria
-
49
91 Mack Dump Truck has had a lot of work done to the truck just had inspection done last week . truck is ready to go to work . 23k Pup is sold truck only
-
50
AMVIC Licenced..
Financing is Available (oac)AMVIC Licenced.
2012 Dodge Ram 5500 Regular Cab with Fassi F45A Boom Crane for sale on our 7020 50th Street Edmonton Lot.
- 6.7L Cummins Diesel Engine
- Regular cab with Flat bed and Tool Cabinets.
- Only 145,296 Kilometers.
- Dual Controls with Hydraulic Outriggers
- Power-Windows Mirrors& Doors & much more..
Call Now: 780-705-8780
Visit us online: www.jeetautosales.ca
Get Preapproved: https://www.jeetautosales.ca/apply-for-credit/
Address: 7020 50 Street NW Edmonton. Alberta
Open 7 days a week
Hours of Operation: Monday – Friday 9am till 7pm
Saturday: 9am till 5pm.
Sunday: Noon till 5pm
Vin: 3C7WDNBL1CG110674
Year: 2012
Make: Dodge
Model: Ram 5500 SLT4X4 Picker crane with fassi fusa
Trim: SLT 4X4 PICKER CRANE
Mileage: 145296 km
Exterior Colour: WHITE
Fuel: diesel
Engine: 6.7L, Cummins